Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes
Gr5 werkstoff nr. 3.7165 Pipes & Tubes Manufacturer, Exporter & Suppliers in India.
ASTM B338 / 861 / 862 Gr5 UNS R56400 Seamless Pipes & Tubes, Welded Pipes & Tubes, ERW Pipes Suppliers.
Introduction
Kalpataru piping solutions are leading manufacturer, supplier, exporters and stockists for high-quality Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes. Kalpataru piping solutions offer a complete range of Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes as Square, Round, Hex, Flat, Wire In Black & Bright Finish and etc. We are manufactured these using high quality raw materials. Titanium Alloy Gr 5 pipes and Tubes are widely used in various application industry such as Pressure Vessels, Valves, Storage Tanks, Condensers, Line Pipe, Flanges and Fittings etc. Kalpataru piping solutions export, Supply & Manufacture Titanium Alloy forms like a seamless pipe, tubes, plates, sheets, shims, Hastelloy, round bars, wires, Instrumentation Valves, valves, spools and many others.
Equivalent Grades of Titanium Alloy Gr 5 pipes & Titanium Alloy Gr 5 Tubes
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr5 | 3.7165 | R56400 |
Specifications of Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes
| Standard | : | ASTM B861, B338, B388, B862 / ASME SB861, SB338, SB388, SB862 |
| Pipe Range | : | ½”NB to 24”NB in Sch 10s, 40s, 80s, 160s, XXS. |
| Tubes Range | : | 1mm OD upto 254mm OD in Thickness 0.1 to 20mm. |
| Type | : | Seamless / ERW / Welded / Fabricated / LSAW Pipes |
| Form | : | Round, Square, Rectangular, Hydraulic Etc. |
| End | : | Plain End, Bevelled End, Treaded |
| Length | : | Single Random, Double Ranidom & Cut Length |
Chemical Composition of Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes
| Grade | C | N | O | H | Ti | Fe |
| Titanium Gr 2 | 0.10 max | 0.03 max | 0.25 max | 0.015 max | bal | 0.30 max |
| Titanium Gr 5 | 0.10 max | 0.05 max | 0.20 max | 0.015 max | bal | 0.40 max |
| Titanium Gr 5 | 0.08 max | .03 max | .25max | 0.30 max | Bal | 0.2 max |
Mechanical & Physical Properties of Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Gr.2 | 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20 % |
| Gr.5 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
| Gr. 7 | 0.163 ib/in3 | 50 | 40/65 | 20 % |
Types of of Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes
- ASTM B338 Gr 5 Titanium Seamless Pipes
- ASTM B338 Gr 5 Titanium Seamless Tubes
- ASTM B338 Gr 5 Titanium Welded Pipes
- ASTM B338 Gr 5 Titanium Welded Tubes
- Titanium Gr 5 Seamless Pipes
- Titanium Gr 5 ERW Pipes
- Titanium Gr 5 EFW Pipes
- ASTM B338 Gr 5 Titanium Welded Pipes
- ASTM B338 Gr 5 Titanium Rectangular Pipes
- Titanium Gr 5 Seamless Tubes
- Titanium Gr 5 ERW Tubes
- Titanium Gr 5 EFW Tubes
- Titanium Gr 5 Welded Tubes
- Titanium Gr 5 Rectangular Tubes
Marking & Packing Of Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes
Kalpataru Piping Solutions pack Titanium Alloy Gr 5 pipes and Tubes properly and carefully to ensure that there is no damage to the Titanium Alloy Gr 5 pipes and Tubes during the transit. We pack Titanium Alloy Gr 5 pipes and Tubes in wooden boxes and supply it all over the world.
High-Quality Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes – Quality Assurance!
Kalpataru Piping Solutions Is One Of The Most Trusted Exporter, Supplier, Stockist & Manufacturer Of Titanium Alloy Gr5 pipes and Tubes. Kalpataru Piping Solutions Offers High-Quality Titanium Alloy Gr5 pipes and Tubes. We Inspect Our Titanium Alloy Gr5 pipes and Tubes At Each Stage Of Production Process, To Make Sure That The Quality Of The Titanium Alloy Gr5 pipes and Tubes Is Not Compromised. They Are Examined To Confirm Their Standards And We Also Offer Third Party Inspection Of Our Titanium Alloy Gr5 pipes and Tubes On Demand Of Our Clients. Kalpataru piping solutions even Offer Test Certificates For Our Titanium Alloy Gr5 pipes and Tubes.
We Pack Titanium Alloy Gr5 pipes and Tubes Properly And Carefully To Ensure That There Is No Damage To Titanium Alloy Gr5 pipes and Tubes During The Transit. We Pack copper Titanium Alloy Gr5 pipes and Tubes in Wooden Boxes And Supply It All Over The World.
Why Choose Kalpataru Piping Solutions For Buying Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes?
- Huge Stock Of Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes.
- Large Production Capacity Of Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes
- Kalpataru Piping Solutions Offer Highest Quality Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes At best Price.
- We Offer Customised Sizes For Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes Depending On Our Clients Requirement
Kalpataru Piping Solutions Offer High-Quality Titanium Alloy Gr 5 Pipes & Titanium Alloy Gr 5 Tubes With Test Certificates. We Even Allow Third Party Inspection.
Related Products
FAQ’s About Monel Flanges
What is the maximum service temperature for Monel 400 flanges?
Monel 400 flanges can be used up to approximately 550°C (1022°F) in non-oxidizing conditions, making them suitable for high-temperature chemical processing and steam applications.
Can Monel flanges be used with hydrofluoric acid?
Yes. Monel 400 is the industry-standard material for handling hydrofluoric acid at nearly all concentrations and temperatures in de-aerated conditions, which is why it is widely specified for HF alkylation units in refineries.
What is the difference between ASTM B564 and ASME SB564?
ASTM B564 is issued by ASTM International, while ASME SB564 is the equivalent specification adopted by the ASME Boiler and Pressure Vessel Code. The two are technically identical for Monel forged fittings and flanges; ASME SB564 is typically referenced for boiler and pressure-vessel code compliance.
Do you supply Mill Test Certificates with Monel flanges?
Yes. Every Monel flange from Kalpataru Piping is supplied with an EN10204 Type 3.1 Mill Test Certificate as standard. Type 3.2 third-party witnessed certification and additional QAP or radiography documentation can be arranged on request.
What is the typical lead time for Monel flanges?
Standard sizes in Monel 400 and Monel K500 are typically available ex-stock or within a short lead time; custom sizes, pressure classes, or Type 3.2 certification requirements may extend delivery. Contact our sales team with your specification for an accurate lead-time estimate.
What is the difference between a Monel Slip-On Flange and a Monel Weld Neck Flange?
A slip-on flange slides over the pipe end and is fillet-welded on both sides, making it easier and faster to install at lower pressure ratings. A weld neck flange has a tapered hub that is butt-welded to the pipe, giving superior stress distribution and making it the preferred choice for high-pressure, high-temperature, and cyclic-load services.
