Nickel Alloy Pipes And Tubes Manufacturer and Supplier in India
Home > Nickel Alloy Steel Products > Nickel Alloy Pipes & Tubes
Table of Contents
- Specifications of Nickel Alloy Pipes And Tubes
- Chemical Composition of Nickel Alloy Pipes And Tubes
- Nickel Alloy Pipes And Tubes Mechanical Properties
- Different Types of Nickel Alloy Pipes And Tubes
- Standards & Specification Reference of Nickel Alloy Pipes And Tubes
- Applications of Nickel Alloy Pipes And Tubes
- Frequently Asked Questions
At Kalpaturu Piping, we manufacture, stock and export a complete range of super duplex steel products trusted by the world’s most demanding industries. Super duplex stainless steel is a high-alloy, austenitic-ferritic grade with a near 50:50 phase balance that delivers roughly twice the yield strength of standard 300-series stainless steel while resisting pitting, crevice attack and chloride stress corrosion cracking. Our portfolio spans UNS S32750 (Duplex 2507) and UNS S32760 (Zeron 100) in pipes, tubes, flanges, buttweld and forged fittings, round bars, sheets, plates and coil tubes. Every consignment ships with EN 10204 3.1 material test certificates, PMI verification and full mill traceability, so engineers can specify with confidence. With ready stock, tight dimensional tolerances and rapid dispatch across India and overseas, Kalpaturu Piping helps oil & gas, marine, desalination and chemical processing projects avoid downtime. Tell us your grade, size and standard — we will match it precisely and quote fast.
Specifications of Nickel Alloy Pipes And Tubes
| Parameter | Specification Details |
| Standard Specifications | ASTM B161, B163, B725, B730 / ASME SB161, SB163, SB725, SB730 |
| Dimensional Standards | ASME B36.19M (Stainless/Non-Ferrous Alloys) & ASME B36.10M (Wrought Steel Standards) |
| Available Grades | Nickel 200 (UNS N02200), Nickel 201 (UNS N02201), Nickel 205 (UNS N02205) |
| Pipe Size Range | 1/2″ to 6″ (OD & Nominal Bore) in various SWG & Schedules (SCH) |
| Tube Size Range | 1 mm OD up to 254 mm OD (0.2 mm to 20 mm wall thickness) |
| Standard Schedules (SCH) | SCH 5, SCH 10, SCH 40, SCH 80, SCH 160, XXS |
| Manufacturing Types | Seamless, ERW (Electric Resistance Welded), Welded, Fabricated, CDW (Cold Drawn Welded) |
| End Connections | Plain End, Beveled End, Threaded |
| Lengths Available | Single Random, Double Random, Cut Lengths, Coiled |
Chemical Composition of Nickel Alloy Pipes And Tubes
|
Alloy Grade |
Ni |
C |
Mo |
Mn |
Si |
Fe |
P |
S |
Cu |
Cr |
|
Alloy 200 |
99.0 min |
0.15 max |
— |
0.35 max |
0.35 max |
0.40 max |
— |
0.01 max |
0.25 max |
— |
|
Alloy 201 |
99.0 min |
0.02 max |
— |
0.35 max |
0.35 max |
0.40 max |
— |
0.01 max |
0.25 max |
— |
Nickel Alloy Pipes And Tubes Mechanical Properties
|
Property / Parameter |
Alloy 200 / 201 Value (ASTM B161 Annealed Min.) |
|
Density |
8.9 g/cm³ |
|
Melting Point |
1446 °C (2635 °F) |
|
Yield Strength (0.2% Offset) |
15,000 Psi / 105 MPa (minimum) |
|
Tensile Strength |
55,000 Psi / 380 MPa (minimum) |
|
Elongation |
30% (minimum) |
Standards & Specification Reference of Nickel Alloy Pipes And Tubes
|
Standard Spec |
Product Form / Scope |
|
ASTM B161 / ASME SB161 |
Nickel Seamless Pipe and Tube (General application) |
|
ASTM B163 / ASME SB163 |
Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes |
|
ASTM B725 / ASME SB725 |
Welded Nickel (UNS N02200/N02201) Pipe |
|
ASTM B730 / ASME SB730 |
Welded Nickel (UNS N02200/N02201) Tube |
Different Types of Nickel Alloy Pipes And Tubes
Nickel 200 Pipe
Nickel 200 Seamless Tube
Nickel 201 Pipe
Nickel 201 Seamless Tube
Nickel Alloy Boiler Tube
Nickel Alloy Condenser Tube
Nickel Alloy Heater Tube
Nickel Alloy Pipes
Nickel Alloy Seamless Pipes
Nickel Alloy Tubes
Nickel Alloy Welded Pipe
Nickel Heat Exchanger Tube
Nickel Instrumentation Tube
Nickel Redrawn Tubing
Pure Nickel Pipe
Applications of Nickel Alloy Pipes And Tubes
- Chemical Processing Plants
- Petrochemical Processing Units
- Oil and Gas Refineries
- Offshore Oil and Gas Platforms
- Power Generation Plants
- Heat Exchangers and Condensers
Frequently Asked Questions
What are nickel alloy pipes and tubes?
Nickel alloy pipes and tubes are metal products made from nickel or nickel-based alloys, offering excellent corrosion resistance, heat resistance, and durability for demanding industrial applications.
What are nickel alloy pipes used for?
Nickel alloy pipes are used in chemical processing, oil and gas, marine, power generation, food processing, pharmaceutical, and petrochemical industries.
What is the difference between Nickel 200 and Nickel 201 pipes?
Nickel 200 is commercially pure nickel with good mechanical strength, while Nickel 201 has lower carbon content, making it better suited for high-temperature applications where graphite formation must be avoided.
What are the advantages of nickel alloy pipes and tubes?
Nickel alloy pipes and tubes provide excellent corrosion resistance, high-temperature strength, good weldability, superior thermal stability, and a long service life.
Are nickel alloy pipes corrosion resistant?
Yes, nickel alloy pipes offer outstanding corrosion resistance against acids, alkalis, seawater, and many aggressive chemical environments, making them ideal for harsh industrial conditions.
