Titanium Alloy Gr 2 Instrumentation Valves
Titanium Gr 2 werkstoff nr. 3.7035 Instrumentation Valves Manufacturer, Exporter & Suppliers in India.
ASTM B381 / B367 Gr 2 UNS R50400 Instrumentation Valves Suppliers.
Titanium Alloy Gr 2 Ball Valve, Titanium Alloy Gr 2 Check Valve, Titanium Alloy Gr 2 Double Block & Bleed Valve, Titanium Alloy Gr 2 Gauge Valve, Titanium Alloy Gr 2 Manifold Valve, Titanium Alloy Gr 2 Mono Flange Valve, Titanium Alloy Gr 2 Needle Valve, Titanium Alloy Gr 2 Plug Valve, Titanium Alloy Gr 2 Pressure Relief Valve, Titanium Alloy Gr 2 Vent & Bleeder Valve
Introduction
Kalpataru piping solutions is leading manufacturer, supplier, exporters and stoickest for high quality Titanium Alloy Gr2 Instrumentation Valves. Kalpataru piping solutions offer a complete range of Titanium Alloy Titanium Alloy Gr2 Instrumentation Valves as Screwed [NPT], Socket Weld, Flanged End, Screwed Parallel, Screwed Taper. We are manufactured these using high quality raw materials.Titanium Alloy Gr2 Instrumentation Valves are widely in chemicals and petro-chemicals Plants, desalination plants, paper & pulp Industries, automotive etc. Kalpataru piping solutions export, Supply & Manufacture Titanium Alloy forms like seamless pipe, tubes, plates, sheets, shims, hastelloy, round bars, wires, Instrumentation Valves, valves, spools and many others.
Equivalent Grades of Titanium Alloy Gr2 Instrumentation Valves:
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr2 | 3.7035 | R50400 |
Specifications of Titanium Alloy Gr2 Instrumentation Valves:
Dimension : API602, ASME B1.20.1, ASME B16.11, ASME B16.5, API598
Specification : ASTM B381 / B367 / ASME SB381 / SB367
Size : DN15~50,NPS 1/2″~2″
Pressure rating : PN1.0Mpa~PN420MPa,Class150~2500
End Connection : Screwed [NPT], Socket Weld, Flanged End, Screwed Parallel, Screwed Taper
Grades : GR I, GR -2, GR-3, GR-4, GR-5, GR-7
Chemical Composition of Titanium Alloy Gr2 Instrumentation Valves:
| Grade | C | N | O | H | Ti | Fe |
| Titanium Gr 2 | 0.10 max | 0.03 max | 0.25 max | 0.015 max | bal | 0.30 max |
Mechanical & Physical Properties of Titanium Alloy Gr2 Instrumentation Valves:
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Gr.2 | 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20 % |
| Gr.5 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
Types of Titanium Alloy Gr2 Instrumentation Valves
- Titanium Gr2 Bars
- Titanium Forged Round Bars
- Titanium Gr2 Square Bars
- Titanium Hollow Bar
- Titanium Black Bars
- Titanium Hexagon Bars
- Titanium Cold Drawn Bars
- Titanium Spring Steel Bars
- Titanium Hex Bars
- Titanium Wire Bobbin
- Titanium Wire Coil
- Titanium Filler Wire
Marking & Packing Of Titanium Alloy Gr2 Instrumentation Valves:
Kalpataru Piping Solutions pack Titanium Alloy Gr2 Instrumentation Valves properly and carefully to ensure that there is no damage to the Titanium Alloy Gr2 Instrumentation Valves during the transit. We pack Titanium Alloy Gr2 Instrumentation Valves in wooden boxes and supply it all over the world.
High-Quality Titanium Alloy Gr 2 Instrumentation Valves – Quality Assurance!
Kalpataru Piping Solutions Is One Of The Most Trusted Exporter, Supplier, Stockist & Manufacturer Of Titanium Alloy Gr2 Instrumentation Valves. Kalpataru Piping Solutions Offers High-Quality Titanium Alloy Gr2 Instrumentation Valves. We Inspect Our Titanium Alloy Gr2 Instrumentation Valves At Each Stage Of Production Process, To Make Sure That The Quality Of The Titanium Alloy Gr2 Instrumentation Valves Is Not Compromised. They Are Examined To Confirm Their Standards And We Also Offer Third Party Inspection Of Our Titanium Alloy Gr2 Instrumentation Valves On Demand Of Our Clients. Kalpataru piping solutions even Offer Test Certificates For Our Titanium Alloy Gr2 Instrumentation Valves.
We Pack Titanium Alloy Gr2 Instrumentation Valves Properly And Carefully To Ensure That There Is No Damage To Titanium Alloy Gr2 Instrumentation Valves During The Transit. We Pack copper Titanium Alloy Gr2 Instrumentation Valves in Wooden Boxes And Supply It All Over The World.
Why Choose Kalpataru Piping Solutions For Buying Titanium Alloy Gr2 Instrumentation Valves?
- Huge Stock Of Titanium Alloy Gr2 Instrumentation Valves.
- Large Production Capacity Of Titanium Alloy Gr2 Instrumentation Valves
- Kalpataru Piping Solutions Offer Highest Quality Titanium Alloy Gr2 Instrumentation Valves At best Price.
- We Offer Customised Sizes For Titanium Alloy Gr2 Instrumentation Valves Depending On Our Clients Requirement
Kalpataru Piping Solutions Offer High-Quality Titanium Alloy Gr2 Instrumentation Valves With Test Certificates. We Even Allow Third Party Inspection.
Related Products
Frequently Asked Questions
What's the difference between Monel 400 and Monel K500 fasteners?
Monel 400 is the standard, lower-cost grade for general corrosion resistance in chemical, marine, and acid service. Monel K500 is age-hardened for roughly double the tensile strength, at a 30–50% cost premium, and earns that premium on high-load or wear applications like shafting and pump components. See our full comparison on the Monel 400 Fasteners page.
Which Monel grade should I use for marine fasteners?
Monel 400 covers the vast majority of marine fastening needs — seawater piping, deck hardware, and general corrosion resistance. Reach for Monel K500 specifically when the application also carries a real mechanical load, like propeller shafting or pump hardware.
Do you supply custom or coated Monel fasteners?
Yes — custom head marking, thread locking compounds, and surface coatings are all available on request, in addition to standard mill-finish fasteners.
What is the minimum order quantity for Monel fasteners?
We run zero MOQ across both grades. Standard sizes are ex-stock in Mumbai for fast dispatch; anything outside standard stock is manufactured to order with no minimum quantity requirement.
What certificates come standard with Monel fasteners?
Every order ships with an EN 10204 3.1 mill test certificate. PMI, third-party inspection (TPI), and NABL-accredited lab reports are available on request for critical applications.
What is the HS code for Monel fasteners?
Generally 7318.15.00, though it's worth confirming the exact classification with your customs broker since it can vary slightly by destination country.
What industries typically use Monel fasteners?
Chemical and petrochemical processing, oil and gas (including sour service), marine and shipbuilding, and defense/aerospace account for the large majority of demand, with occasional specialty use in coastal construction hardware.
What payment and delivery terms do you offer?
We accept LC, TT/wire transfer, and cheque, with export-grade packaging and dispatch from Mumbai or Kalamboli ports. See the Packaging, Payment & Delivery section above for details.
Need Monel 400 Wire Mesh You Can Actually Rely On?
Tell us your mesh count, weave, and quantity, and we'll get you a quote with a real lead time — not a generic price list. Specifying a full system? Run the numbers first with our pipe & tube weight calculator or plates & sheets weight calculator.
