SMO 254 Filler Wire
ANSI/ASME B16.11, ASTM A276 SMO 254 Filler Wire Manufacturer, Exporter and Suppliers.
SMO 254 UNS S31254 Filler Wire suppliers, manufacturer exporter in India
SMO 254 Filler Wire Suppliers, Manufacturer, Exporter, Wholesaler in India.
Introduction
Kalpataru Piping is Manufacturers, Exporters and Supplier of Wide range SMO 254 Filler Wires that are using high quality raw materials in mumbai, India. SMO 254 Filler Wire is a high-alloy austenitic stainless steel developed for use in seawater and other aggressive chloride-bearing media. SMO 254 Filler Wire (UNS S31254) is readily fabricated and welded. Filler Wire 254 / SMO 254/ is an austenitic stainless steel with a high molybdenum content. Ultra range SMO 254 Filler Wire and SMO 254 Coil Wire for extremely corrosive environments. SMO 254 Filler Wire are installed at various levels of applied alternating bending stress of the tube. This method applies a completely reversed bending stress on the fitting connection of this SMO 254 Electrode while pressurized with hydraulic oil at the tubing working pressure.
Specification
| Diameter | : | 5mm~ 500 mm |
| Wier Range | : | 1/2″ to 100″ |
| Standards | : | ASTM A276, A279, A479 |
| Length | : | 100 mm to 6000 mm |
| Finish | : | Bright, Polish and Black |
| Form | : | Round, Square, Hex (A/F), Bush, Rectangle , Flat, Wire Mesh |
| Grades | : | UNS No. S31254 |
SMO 254 Filler Wire Applications:
- Offshore rigs and onshore petrochemical plants and oil refineries
- Process plant for pharmaceuticals, surfactants, chemicals and additives.
- Energy (Gas and Electricity), Nuclear and Defence industries.
- Marine and Shipbuilding
- Paper and pulp plant
- Anywhere there is corrosion/high or low temperature/pressure
SMO 254 Filler Wire Chemical Composition
| Grade | C | Mn | Si | Cu | S | P | Mo | Ni | Cr |
| SMO 254 | 0.02 | 1 | 0.08 | 0.5-1.0 | 0.01 | 0.03 | 6.0-6.5 | 17.5-18.5 | 19.5-20.5 |
SMO 254 Filler Wire Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8 g/cm3 | 1320-1390 ℃ | 650 | 300 | 35 % |
Equivalent Grades for SMO 254 Filler Wire
| STANDARD | WERKSTOFF NR. | UNS | SIS | BS | GOST | AFNOR | EN |
| SMO 254 | 1.4547 | S31254 | 2378 | – | – | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 |
Types of SMO 254 Filler Wire
-
SMO 254 Filler Wire
-
SMO 254 Wire Mesh
-
SMO 254 Welding Wire
-
SMO 254 10 gauge welded Wire Mesh
-
SMO 254 Knitted Wire Mesh
-
SMO 254 Filler Wire
-
SMO 254 Coil Wire
-
SMO 254 Electrode Wire
-
SMO 254 Spool Wire
Related Products
FAQ’s About ASTM A106 Grade B Pipes
What is ASTM A106 Grade B pipe?
ASTM A106/A106M Grade B is a seamless carbon steel pipe specification intended for high-temperature service. The exact project suitability depends on the governing piping code, design conditions and purchase specification.
What is the difference between ASTM A106 Grade B and ASTM A53 Grade B?
ASTM A106 Grade B is a seamless high-temperature-service pipe specification. ASTM A53 Grade B covers welded and seamless pipe for mechanical and pressure applications and ordinary steam, water, gas and air service. Select the specification required by the project and design code.
What sizes does Kalpataru supply?
The current brief lists a Kalpataru supply range of 1/2 to 36 in NPS and Schedule 10 to XXS, subject to size and availability. ASTM A106/A106M itself has a wider standard scope.
What is the maximum temperature of ASTM A106 Grade B pipe?
Do not use one universal maximum temperature from the ASTM material specification. Allowable service depends on the design code, pressure, wall thickness, allowable stress and project conditions.
Is ASTM A106 Grade B seamless or welded?
ASTM A106/A106M is a seamless carbon steel pipe specification. Do not describe ERW, LSAW or other welded pipe as ASTM A106 product construction.
What tests are required for ASTM A106 Grade B pipe?
The specification includes mechanical testing and bend/flattening testing as applicable, together with hydrostatic and/or nondestructive electric testing requirements. The exact inspection package should match the current ASTM edition and purchase order.
What documents can be supplied?
Orders can be supplied with EN 10204 3.1 MTC and, where applicable and agreed, IBR documentation, third-party inspection and project-specific test reports.
How is ASTM A106 Grade B pipe priced?
Price depends on NPS, schedule or wall thickness, length, quantity, origin/mill, testing/certification, coating/end preparation and delivery destination. Send the full requirement for a size-wise quotation.
