Inconel 600 Plates & Inconel 600 Sheets
Inconel 600 Plates, UNS N06600 Plates, Inconel 600 Price, Inconel 600 Sheets, ASME SB168 Shim Sheets, Inconel Alloy 600 Nickel Based Superalloy Sheet Plate, UNS N06600 Sheets, ASTM SB168 Coils Plates Manufacturer.
UNS N06600 Inconel 600 Chequered Plate, ASME SB168 2.4816 Cold Drawn Plate, Inconel 600 Superalloy Mesh Plate, Alloy 600 Nickel Clad Plate, 3mm Nickel Alloy 600 alloy steel plates Manufacturer and Exporter in India.
Kalpataru piping is one of the top companies in India that manufactures, supplies, and exports Inconel 600 plates and sheets. Inconel 600 Plates and Inconel 600 Sheets are nickel-chromium alloys with added aluminum that are very resistant to oxidation and other types of high-temperature corrosion. These Inconel 600 sheets (UNS N06600) are used to make radiant tubes and supports for steam super-heater tube supports, as well as to heat treat muffles and retorts and support grids for catalysts used to make nitric acid. Inconel Alloy 600 Plates are also used to make combustion chambers, tube supports, and ashtrays for power plants. Inconel 600 Plate is a solid solution alloy made of nickel and chromium that works well up to about 1200°C. Inconel 600 Plate doesn’t rust in water because it has a lot of nickel and chromium. The strength and toughness are both good, and they don’t change even after being used for a long time at high temperatures. The Inconel 600 Sheet doesn’t get nitrided in dissociated ammonia, and Inconel 600 Coil is the only product that works better in this situation. Inconel 600 Rolling Sheet is strong, tough, and flexible, and it can be used at temperatures as low as -196 degrees Celsius. Inconel 600 Flat Sheet is an Inconel alloy that comes in many different forms, like Inconel Alloy 600 Plate and the Inconel 600 Perforated Plate. Inconel 600 Rolling Plate is strong at high temperatures and stays flexible even after a long time in use. It also doesn’t rust in places where oxygen is present. Inconel 600 Hot rolled Plate is very resistant to oxidation at high temperatures (up to 2200 o F) and also resists corrosion in water well. In places, where the temperature is high, can use Inconel 600 Clad Plates. Inconel 600 plates and Inconel 600 sheets come in different sizes, specifications, and shapes to meet the needs of our valued customers. Use the Inconel 600 plate & sheet weight calculator to calculate the estimated weight of SB 168 plates and sheets for various thicknesses and widths.
Inconel 600 Plates & Inconel 600 Sheets Specifications
| Specifications | : | ASTM / ASME SB 168 |
| Size | : | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | : | 0.1mm to 12 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Inconel 600 Plates & Inconel 600 Sheets Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Inconel 600 Plates & Inconel 600 Sheets Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Equivalent Grades for Inconel 600 Plates & Inconel 600 Sheets
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Related Products
- Inconel 600 Pipes & Tubes
- Inconel 600 Flanges
- Inconel 600 Round Bars & Wires
- Inconel 600 Plates & Sheets
- Inconel 600 Buttweld Fittings
- Inconel 625 Pipes & Tubes
- Inconel 625 Flanges
- Inconel 625 Round Bars & Wires
- Inconel 625 Plates & Sheets
- Inconel 625 Buttweld Fittings
- Inconel 600 Shims
- Inconel 625 Shims
Inconel 625 Forged Fittings Exporter | Countries and Cities We Supply To
Kalpataru Piping Solutions exports Inconel 625 forged fittings and nickel alloy 625 forgings to over 40 countries worldwide. Our major export destinations include: United States (Houston, Los Angeles, New York), United Kingdom (London, Aberdeen), UAE (Dubai, Abu Dhabi, Sharjah), Saudi Arabia (Dammam, Riyadh, Jubail), Canada (Calgary, Edmonton), Australia (Perth, Brisbane), Germany (Hamburg, Dusseldorf), Netherlands (Rotterdam, Amsterdam), Singapore, Malaysia (Kuala Lumpur), South Korea (Busan, Seoul), Brazil (Rio de Janeiro, Sao Paulo), South Africa (Johannesburg, Durban), Italy (Genoa, Milan), France (Paris, Marseille), Norway (Stavanger, Bergen), and all GCC and Southeast Asian markets.
FAQs - ASTM A53 Grade B Pipe
What is Nickel 200 seamless pipe used for?
Nickel 200 seamless pipe is used wherever maximum corrosion resistance and purity are needed, including oil & gas drilling, chemical processing, food-grade equipment, and marine piping systems.
What is the difference between Nickel 200 and Nickel 201 pipe?
Nickel 200 has a higher carbon content suited to general service below 315°C, while Nickel 201 has low carbon content designed for high-temperature applications above 315°C, avoiding embrittlement issues.
What size range do you supply for Nickel 200 seamless pipes and tubes?
Kalpataru Piping supplies Nickel 200 pipes and tubes in sizes from 4 mm to 219 mm, with wall thickness from 0.5 mm to 20 mm, and lengths up to 13,500 mm, fully customisable to your project.
Do you provide mill test certificates with every order?
Yes, every consignment of Nickel 200 seamless pipe is supplied with EN 10204 3.1 or 3.2 mill test certificates, and third-party inspection can be arranged on request.
Is Nickel 200 pipe suitable for high-temperature applications?
Nickel 200 performs well up to around 315°C (600°F). For higher-temperature service, we recommend Nickel 201, which has a low-carbon composition designed to resist embrittlement at elevated temperatures.
Can Kalpataru Piping supply custom Nickel 200 pipe sizes and forms?
Yes, we manufacture custom sizes, thicknesses, and forms including round, square, rectangular, and hydraulic tube, tailored precisely to your project drawing or specification.
Do you export Nickel 200 seamless pipes and tubes internationally?
Yes, Kalpataru Piping exports Nickel 200 seamless pipes and tubes to over 40 countries worldwide, with complete documentation, secure packing, and reliable shipping support.
