SMO 254 WireMesh
Introduction
Kalpataru Piping Solutions is Manufacturers, Exporters and Supplier of Wide range SMO 254 wiremesh that are using high quality raw materials in mumbai, India. By using SMO 254 Wiremesh, you attain soaring alloyed and steel by means of exceptional erosion confrontation. SMO 254 Wiremesh is an elevated – alloy austenitic steel established for its usage in seawater and another related hostile chloride – bearing media. SMO 254 Wiresmesh is an extremely austenitic alloy which is being provided in hot functioned and annealed form. SMO 254 WireMesh is a grid formed by welding steel wires together at their intersections. SMO 254 WireMesh is further classified as Stainless Steel SMO 254 Welded WireMesh and Stainless Steel SMO 254 Woven Wire Mesh. Kalpataru Piping is one of the leading Manufacturer, Supplier and Exporter of SMO 254 WireMesh in various shapes such as SMO 254 Welded Wire Mesh, SMO 254 Woven Wire Mesh, SMO 254 Plain Weave Wire Mesh, SMO 254 Twill Weave WireMesh, SMO 254 Dutch Weave WireMesh, SMO 254 Crimped Weave Wire Mesh, SMO 254 Three Heddle Weave Wire Mesh, SMO 254 Five Heddle Weave Wire Mesh in India as well as in all over the world at best price
Specification of SMO 254 WireMesh
|
Specifications |
ASTM A580 ASME SA580 / ASTM A313 ASME SA313 |
|
|
SMO 254 Wire Dimensions |
ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
|
|
SMO 254 Wire Length |
100 mm TO 6000 mm, customizable |
|
|
SMO 254 Wire Diameter |
10 mm To 100 mm or as per client requirement |
|
|
SMO 254 Wire Main Types |
|
|
|
SMO 254 Wire Density |
8.89 g/cm3 |
|
|
Ultimate Strength (≥ MPa): |
580-750 |
|
|
SMO 254 WireResistance (μΩ.m): |
as standard |
|
|
SMO 254 Wire Elongation (≥ %): |
28-30 |
|
|
Surface |
Polished bright, Smooth |
|
|
SMO 254 Wire Technique |
Cold Rolled, hot rolled |
|
|
SMO 254 Wire Condition |
M, Y, 1/2Hard |
|
|
Tempers |
Tempers range from dead soft annealed to ultra spring temper |
|
|
SMO 254 welded wire mesh |
Roll Width: 24inch, 36inch, 1Metre, 48inch, 72inch, or 84inch Roll Length: 100feet or 150feet |
|
|
SMO 254 wire mesh weaving methods |
plain weave, twill weave, dutch weave |
|
|
Offered in a wide range of packages including: |
|
|
|
Sample |
Free sample |
SMO 254 WireMesh Equivalent Grades
|
STandARD |
WERKSTOFF NR. |
UNS |
SIS |
BS |
GOST |
AFNOR |
EN |
|
SMO 254 |
1.4547 |
S31254 |
2378 |
– |
– |
Z1 CNDU 20.18.06Az |
X1CrNiMoCuN20-18-7 |
SMO 254 WireMesh Chemical Composition
| Grade | C | Mn | Si | Cu | S | P | Mo | Ni | Cr |
| SMO 254 | 0.02 | 1 | 0.08 | 0.5-1.0 | 0.01 | 0.03 | 6.0-6.5 | 17.5-18.5 | 19.5-20.5 |
SMO 254 WireMesh Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8 g/cm3 | 1320-1390 ℃ | 650 | 300 | 35 % |
SMO 254 WireMesh Types
- SMO 254 Wire
- SMO 254 Mesh
- SMO 254 Welded WireMesh
- SMO 254 Woven WireMesh
- SMO 254 Weave WireMesh
- 6Mo Wire
- 6Mo Mesh
- 6Mo Welded WireMesh
- 6Mo Woven WireMesh
- 6Mo Weave WireMesh
SMO 254 WireMesh Forms
- SMO 254 WireMesh
- SMO 254 Plain Weave WireMesh
- SMO 254 Twill Weave WireMesh
- SMO 254 Dutch Weave WireMesh
- 6Mo WireMesh
- 6Mo Plain Weave WireMesh
- 6Mo Twill Weave WireMesh
- 6Mo Dutch Weave WireMesh
Related Products
FAQ’s About ASTM A106 Grade B Pipes
What is ASTM A106 Grade B pipe?
ASTM A106/A106M Grade B is a seamless carbon steel pipe specification intended for high-temperature service. The exact project suitability depends on the governing piping code, design conditions and purchase specification.
What is the difference between ASTM A106 Grade B and ASTM A53 Grade B?
ASTM A106 Grade B is a seamless high-temperature-service pipe specification. ASTM A53 Grade B covers welded and seamless pipe for mechanical and pressure applications and ordinary steam, water, gas and air service. Select the specification required by the project and design code.
What sizes does Kalpataru supply?
The current brief lists a Kalpataru supply range of 1/2 to 36 in NPS and Schedule 10 to XXS, subject to size and availability. ASTM A106/A106M itself has a wider standard scope.
What is the maximum temperature of ASTM A106 Grade B pipe?
Do not use one universal maximum temperature from the ASTM material specification. Allowable service depends on the design code, pressure, wall thickness, allowable stress and project conditions.
Is ASTM A106 Grade B seamless or welded?
ASTM A106/A106M is a seamless carbon steel pipe specification. Do not describe ERW, LSAW or other welded pipe as ASTM A106 product construction.
What tests are required for ASTM A106 Grade B pipe?
The specification includes mechanical testing and bend/flattening testing as applicable, together with hydrostatic and/or nondestructive electric testing requirements. The exact inspection package should match the current ASTM edition and purchase order.
What documents can be supplied?
Orders can be supplied with EN 10204 3.1 MTC and, where applicable and agreed, IBR documentation, third-party inspection and project-specific test reports.
How is ASTM A106 Grade B pipe priced?
Price depends on NPS, schedule or wall thickness, length, quantity, origin/mill, testing/certification, coating/end preparation and delivery destination. Send the full requirement for a size-wise quotation.
