Inconel 718 Instrumentation Valves

Inconel 718 werkstoff nr. 2.4668 Valves Manufacturer, Exporter & Suppliers in India.

Inconel 718 Ball Valve, Inconel 718 Check Valve, Inconel 718 Double Block & Bleed Valve, Inconel 718 Gauge Valve, Inconel 718 Manifold Valve, Inconel 718 Mono Flange Valve, Inconel 718 Needle Valve, Inconel 718 Plug Valve, Inconel 718 Pressure Relief Valve, Inconel 718 Vent & Bleeder Valve

Introduction

Kalpataru Piping is one of the leading Manufacturers, Supplier and Exporters of high quality Inconel 718 Valves in India. We offer ASTM B444 Inconel 718 Valves, Ball Valve, Check Valve, Double Block & Bleed Valve, Gauge Valve, Manifold Valve, Mono Flange Valve, Needle Valve, Plug Valve, Pressure Relief Valve, Vent & Bleeder Valve using high quality raw materials. These WNR 2.4668 Valves is a nickel-based superalloy that holds resistance to higher temperatures and elevated strength properties. Inconel Alloy 718 Valves products is a a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments. These pipes are proven to dispatch a longer duration of service life with the rust-free features. Owing to its remarkable quality and design, it is widely used in oil refineries and chemical industries. Inconel 718 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. These Inconel 718 Valves are widely used in various applications industry like oil and gas, petrochemical, medicine, food, paper, machinery, natural gas etc. The Inconel 718 Seamless Pipes ASTM B444 UNS N07718 are manufactured to sustain very high pressure and product warranty. We can meet most ASME, ASTM, and other specifications, and can cross-reference to most international standards.we carry a full inventory of Inconel 718 Pipes and Tube and Supply.  It as well demonstrates remarkable protection in opposition to corrosion and oxidation. Product and technology applications of these UNS N07718 Valves include: Pollution control equipment, Heat exchangers, Jet engine parts, Pressure valves, and more. As a manufacturer, supplier, stockist and exporter, we offer these Inconel718 Valves in custom-made sizes and thicknesses, as per the exact demands of our esteemed clients.

Enquire Now

Specification of Inconel 718 Instrumentation Valves:

Size : 15 NB to 150 NB IN
Type : Seamless / ERW / Welded / Fabricated / LSAW Pipes
Standards : ASTM B444, ASTM B751, ASTM B829, ASTM B775, ASTM B705, ASTM B704, AMS 5581, ISO 6207, BS 3074NA21, DIN 17751, UNS N07718 / Werkstoff Nr. 2.4668
End : Plain End, Beveled End, Treaded.
Length : Single Random, Double Random & Cut Length.
Form : Round, Square, Rectangular, Hydraulic Etc.

STANDARD WERKSTOFF NR. UNS JIS AFNOR BS GOST EN OR
Inconel 718 2.4668 N07718 – – – – – –

Chemical Composition of Inconel 718 Instrumentation Valves:

Inconel % Ni Cr Fe Mo Nb Co C Mn Si S Cu Al Ti
718 Min. 50 17 balance 2.8 4.75 0.2 0.7
Max. 55 21 3.3 5.5 1 0.08 0.35 0.35 0.01 0.3 0.8 1.15

Mechanical & Physical Properties of Inconel 718 Instrumentation Valves:

Density 8.2  g/cm3
Melting Point 1350 °C (2460 °F)
Tensile Strength Psi – 1,35,000 , MPa – 930
Yield Strength (0.2%Offset) Psi – 75,000 , MPa – 482
Elongation 45 %

Related Products:

Frequently Asked Questions

What's the difference between Monel 400 and Monel K500 fasteners?

Monel 400 is the standard, lower-cost grade for general corrosion resistance in chemical, marine, and acid service. Monel K500 is age-hardened for roughly double the tensile strength, at a 30–50% cost premium, and earns that premium on high-load or wear applications like shafting and pump components. See our full comparison on the Monel 400 Fasteners page.

Which Monel grade should I use for marine fasteners?

Monel 400 covers the vast majority of marine fastening needs — seawater piping, deck hardware, and general corrosion resistance. Reach for Monel K500 specifically when the application also carries a real mechanical load, like propeller shafting or pump hardware.

Do you supply custom or coated Monel fasteners?

Yes — custom head marking, thread locking compounds, and surface coatings are all available on request, in addition to standard mill-finish fasteners.

What is the minimum order quantity for Monel fasteners?

We run zero MOQ across both grades. Standard sizes are ex-stock in Mumbai for fast dispatch; anything outside standard stock is manufactured to order with no minimum quantity requirement.

What certificates come standard with Monel fasteners?

Every order ships with an EN 10204 3.1 mill test certificate. PMI, third-party inspection (TPI), and NABL-accredited lab reports are available on request for critical applications.

What is the HS code for Monel fasteners?

Generally 7318.15.00, though it's worth confirming the exact classification with your customs broker since it can vary slightly by destination country.

What industries typically use Monel fasteners?

Chemical and petrochemical processing, oil and gas (including sour service), marine and shipbuilding, and defense/aerospace account for the large majority of demand, with occasional specialty use in coastal construction hardware.

What payment and delivery terms do you offer?

We accept LC, TT/wire transfer, and cheque, with export-grade packaging and dispatch from Mumbai or Kalamboli ports. See the Packaging, Payment & Delivery section above for details.

Need Monel 400 Wire Mesh You Can Actually Rely On?

Tell us your mesh count, weave, and quantity, and we'll get you a quote with a real lead time — not a generic price list. Specifying a full system? Run the numbers first with our pipe & tube weight calculator or plates & sheets weight calculator.

Request a Quote

    Enquire Now

    Fill the below form and get in touch with us, we’ll call you back.

    Fill the Captcha:

    Our Products

    Hot Products

    Enquire Now
    close slider

      Enquire Now

      Fill the below form and get in touch with us, we’ll call you back.

      Fill the Captcha:
      WhatsApp chat