Incoloy 825 Pipe Spools
Incoloy DIN 1.4876 Pipe Spools, Incoloy UNS N08825 Spool Fittings, Incoloy 825 Pipe Spools Supplier, Manufacturer, Exporter in India
Incoloy 825 Prefabricated Pipe Spool Supplier, Manufacturer, Exporter In Mumbai, India.
Introduction
Kalpataru piping is one of the leading manufacturer, suppliers, exporter of incoloy 825 pipe spool using high quality of raw material. Incoloy 825 is a nickel-iron-chromium alloy with molybdenum and copper added to it. It has excellent resistance to both reducing and oxidizing acids. Incoloy 825 Spool Fittings exceptional resistance to general corrosion, crevice corrosion, pitting and intergranular corrosion, along with stress corrosion cracking. Incoloy 825 Spool Fittings has excellent resistance to sulphuric and phosphoric acids, as well as resists intergranular corrosion in the as-welded condition. Incoloy 825 (UNS N08825) Spool Fittings is often used in Acid production, Nuclear fuel reprocessing, Marine exhaust systems, Radioactive waste handling, Pickling tank heaters, tanks, and equipment. Incoloy 800H and 800HT are ordinarily utilized as a part of temperatures above 1100° F where resistance to creep and rupture is required. The chemical balance permits the nickel steel alloy to display magnificent resistance to carburization, oxidation and nitriding atmospheres. We also offer these Products are available in different size,grades, specification & thickness as per the clients requirements.
Incoloy 825 Pipe Spools Specification :
- Size : ½” NB – 12” NB Sch 10/20/40/80/160
- Specification : ASTM B336 / ASME SB366
- Standard : ASTM, ASME
INCOLOY 825 Pipe Spools FITTINGS EQUIVALENT GRADES:
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo |
Incoloy 825 Pipe SPOOL FITTINGS CHEMICAL COMPOSITION:
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| Incoloy 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
ASTM B336 INCOLOY Pipe SPOOL MECHANICAL & PHYSICAL PROPERTIES:
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation | Hardness (Brinell) |
| Incoloy 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
OTHER TYPES OF Pipe Spools:
- Incoloy Spool Fittings
- ASTM B336 Spool Fitting Stockist to Czechia
- ASME SB366 Spool Fitting
- Incoloy 825 Prefabricated Pipe Spool
- Incoloy 825 Fittings
- Incoloy 825 Pipe Spools
- Incoloy 825 Spool Fitting Supplier to Jordan
- Incoloy 825 Spool Fitting
- Incoloy DIN 2.4858 Spool Fitting Distributors at Germany
- Alloy 825 Spool Fitting Suppliers
- Incoloy UNS N08825 Spool Fitting
- ASTM B336 Inconel Spool Fittings Suppliers at Singapore
- Incoloy 825 Spool Fitting
- Alloy 825 Spool Fitting
- Alloy 825 Spool Fittings
Related Products
- Incoloy 800/800H/800T Instrumentation Valves
- Incoloy 800/800H/800T Filler Wire
- Incoloy 800/800H/800T Long Radius Bends
- Incoloy 800/800H/800T Pipes Spools
- Incoloy 800/800H/800T Wiremesh
- Incoloy 825 Instrumentation Valves
- Incoloy 825 Filler Wire
- Incoloy 825 Long Radius Bends
- Incoloy 825 Pipes Spools
- Incoloy 825 Wiremesh
FAQ’s About Monel Flanges
What is the maximum service temperature for Monel 400 flanges?
Monel 400 flanges can be used up to approximately 550°C (1022°F) in non-oxidizing conditions, making them suitable for high-temperature chemical processing and steam applications.
Can Monel flanges be used with hydrofluoric acid?
Yes. Monel 400 is the industry-standard material for handling hydrofluoric acid at nearly all concentrations and temperatures in de-aerated conditions, which is why it is widely specified for HF alkylation units in refineries.
What is the difference between ASTM B564 and ASME SB564?
ASTM B564 is issued by ASTM International, while ASME SB564 is the equivalent specification adopted by the ASME Boiler and Pressure Vessel Code. The two are technically identical for Monel forged fittings and flanges; ASME SB564 is typically referenced for boiler and pressure-vessel code compliance.
Do you supply Mill Test Certificates with Monel flanges?
Yes. Every Monel flange from Kalpataru Piping is supplied with an EN10204 Type 3.1 Mill Test Certificate as standard. Type 3.2 third-party witnessed certification and additional QAP or radiography documentation can be arranged on request.
What is the typical lead time for Monel flanges?
Standard sizes in Monel 400 and Monel K500 are typically available ex-stock or within a short lead time; custom sizes, pressure classes, or Type 3.2 certification requirements may extend delivery. Contact our sales team with your specification for an accurate lead-time estimate.
What is the difference between a Monel Slip-On Flange and a Monel Weld Neck Flange?
A slip-on flange slides over the pipe end and is fillet-welded on both sides, making it easier and faster to install at lower pressure ratings. A weld neck flange has a tapered hub that is butt-welded to the pipe, giving superior stress distribution and making it the preferred choice for high-pressure, high-temperature, and cyclic-load services.
