Inconel 718 Plates And Inconel 718 Sheets
Inconel 718 Plates, UNS N07718 Plates, ASTM SB670 Coils Plates etc Manufacturer, Supplier, exporter in India.
Inconel 718 Sheets, UNS N07718 Sheets, ASME SB670 Shim Sheets etc Manufacturer, Supplier, exporter in India.
Introduction
Kalpataru piping is one of the leading Manufacturer, Supplier, Exporter of Inconel 718 Plates & Inconel 718 Sheets in India. Inconel 718 Plates & Inconel 718 Sheets are nickel-chromium alloy with an addition of aluminum for outstanding resistance to oxidation and other forms of high temperature corrosion. These Inconel 718 sheets (UNS N07718) are used for Heat treating muffles and retorts, Catalyst support grids in nitric acid production, Radiant tubes, Steam super-heater tube supports, and more. Inconel Alloy 718 Plates are also used in fabricated combustion chambers, tube supports and ash trays in the power generation industry. Inconel 718 Plate is a solid solution nickel chromium heat resisting alloy which gives outstanding performance at temperatures up to about 1200°C. Inconel 718 Plate also has good aqueous corrosion resistance due to the high nickel content in combination with chromium. Strength and toughness are good, and are retained during extended service at high temperature. Inconel 718 Sheets has good resistance to nitriding in dissociated ammonia, and is only outperformed by Inconel 718 Coil in this application. Inconel 718 Rolling Sheets has good strength, ductility and toughness, and can be used at cryogenic temperatures. Inconel 718 Flat Sheet is a Inconel alloy and available in the various forms including Inconel Alloy 718 Plates & Inconel 718 Perforated Sheets etc. Inconel 718 Rolling Plate has good high temperature strength and retains its ductility after long service exposure, with good corrosion resistance under oxidizing conditions. Inconel 718 Hot rolled Plate is very resistant to high-temperature oxidation – up to 2200 º F – and its also has good resistance to aqueous corrosion. Inconel 718 Clad Plates are suitable to use at elevated temperatures. We offer inconel 718 plate, inconel 718 sheet are in different sizes, specifications and shapes as per demands of our esteemed customers.
Inconel 718 Plates & Inconel 718 Sheet Specifications
| Specifications | : | ASTM / ASME SB 670 |
| Size | : | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | : | 0.1mm to 12 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Inconel 718 Plates & Inconel 718 Sheet Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 718 | 0.08 max | 0.35 max | 0.35 max | 0.015max | 0.30 max | – | 50.00 – 55.00 | 17.00 – 21.00 |
Inconel Alloy 718 Plates & Inconel 718 Sheets Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 718 | 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
Equivalent Grades for Inconel 718 Plates & Inconel 718 Sheets
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 718 | 2.4668 | N07718 | – | – | – | – | – |
Related Products
- Inconel 600 Pipes & Tubes
- Inconel 600 Flanges
- Inconel 600 Round Bars & Wires
- Inconel 600 Plates & Sheets
- Inconel 600 Buttweld Fittings
- Inconel 625 Pipes & Tubes
- Inconel 625 Flanges
- Inconel 625 Round Bars & Wires
- Inconel 625 Plates & Sheets
- Inconel 625 Buttweld Fittings
- Inconel 600 Shims
- Inconel 625 Shims
Inconel 625 Forged Fittings Exporter | Countries and Cities We Supply To
Kalpataru Piping Solutions exports Inconel 625 forged fittings and nickel alloy 625 forgings to over 40 countries worldwide. Our major export destinations include: United States (Houston, Los Angeles, New York), United Kingdom (London, Aberdeen), UAE (Dubai, Abu Dhabi, Sharjah), Saudi Arabia (Dammam, Riyadh, Jubail), Canada (Calgary, Edmonton), Australia (Perth, Brisbane), Germany (Hamburg, Dusseldorf), Netherlands (Rotterdam, Amsterdam), Singapore, Malaysia (Kuala Lumpur), South Korea (Busan, Seoul), Brazil (Rio de Janeiro, Sao Paulo), South Africa (Johannesburg, Durban), Italy (Genoa, Milan), France (Paris, Marseille), Norway (Stavanger, Bergen), and all GCC and Southeast Asian markets.
FAQs - ASTM A53 Grade B Pipe
What is Nickel 200 seamless pipe used for?
Nickel 200 seamless pipe is used wherever maximum corrosion resistance and purity are needed, including oil & gas drilling, chemical processing, food-grade equipment, and marine piping systems.
What is the difference between Nickel 200 and Nickel 201 pipe?
Nickel 200 has a higher carbon content suited to general service below 315°C, while Nickel 201 has low carbon content designed for high-temperature applications above 315°C, avoiding embrittlement issues.
What size range do you supply for Nickel 200 seamless pipes and tubes?
Kalpataru Piping supplies Nickel 200 pipes and tubes in sizes from 4 mm to 219 mm, with wall thickness from 0.5 mm to 20 mm, and lengths up to 13,500 mm, fully customisable to your project.
Do you provide mill test certificates with every order?
Yes, every consignment of Nickel 200 seamless pipe is supplied with EN 10204 3.1 or 3.2 mill test certificates, and third-party inspection can be arranged on request.
Is Nickel 200 pipe suitable for high-temperature applications?
Nickel 200 performs well up to around 315°C (600°F). For higher-temperature service, we recommend Nickel 201, which has a low-carbon composition designed to resist embrittlement at elevated temperatures.
Can Kalpataru Piping supply custom Nickel 200 pipe sizes and forms?
Yes, we manufacture custom sizes, thicknesses, and forms including round, square, rectangular, and hydraulic tube, tailored precisely to your project drawing or specification.
Do you export Nickel 200 seamless pipes and tubes internationally?
Yes, Kalpataru Piping exports Nickel 200 seamless pipes and tubes to over 40 countries worldwide, with complete documentation, secure packing, and reliable shipping support.
