Titanium Alloy Gr 5 Forged Fittings
Introduction
kalpataru Piping is one of the leading supplier, manufacturer, exporter, stockist of Titanium Gr 5 Forged Fittings in Mumbai, India as well as all over globe. Titanium Gr 5 Forged Threaded Fittings. Titanium Gr 5 has high tensile strength, endurance strength, creep strength and rupture strength at 700 Degree C, and high inoxidabile at 1000 Degree C. Titanium Forged Socket Weld Fittings is a high-strength, corrosion-resistant nickel chromium material used at -453 Deg to 1300 Deg F. These titanium gr 5 Forged Threaded Fittings are often used in Oil & Gas Extraction, Nuclear, Aerospace, Defense and Automotive. We Are Manufacturers Of titanium gr. 5 Forged Fittings. Kalpataru is leading Manufacturer and supplier of ASME B16.11 incoloy 800 Forged Fittings in India. We provide to our customer products which have dimensional accuracy, high tension thickness, corrosion resistance and Quality products like titanium grade 5 Socket Weld Unions, titanium gr.5 Forged Couplings & titanium gr 5 800 Forged Elbows. titanium gr. 5 Forged Fittings are manufactured according standards and from the highest quality materials. We widely offer high quality titanium gr 5 Forged Fittings, titanium gr. 5 Forged Tee, Titanium grade 5 Forged Caps and Other range of Forged Pipe Fittings such as titanium grade 5 Forged Elbow, titanium gr 5 Equal Tee, Titanium grade 5 Coupling, titanium gr. 7 Pipe Cap, titanium grade 5 Union, titanium grade 5 Bushing, titanium grade 5 Plug, titanium gr. 5 Pipe Nipple, titanium grade 7 Street Elbow in India. We offer titanium grade 57 forged fittings products in different sizes, specifications and shapes as per demands of our esteemed customers.
Titanium Alloy Gr 5 Forged Fittings Chemical Composition
Grade |
Ti | C | Fe | H | N | O | Al | V |
| Titanium Gr 5 | 90 min | – | 0.25 max | – | – | 0.2 max | 6 min | 4 min |
Titanium Alloy Gr 5 Fitting Mechanical Properties
Density |
Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
Equivalent Grades for Gr 5 Titanium Forged Fittings
STANDARD |
WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Titanium Gr 5 | 3.7165 | R56400 | – | – | – | – | – |
Related Products
FAQ’s About Monel Flanges
What is the maximum service temperature for Monel 400 flanges?
Monel 400 flanges can be used up to approximately 550°C (1022°F) in non-oxidizing conditions, making them suitable for high-temperature chemical processing and steam applications.
Can Monel flanges be used with hydrofluoric acid?
Yes. Monel 400 is the industry-standard material for handling hydrofluoric acid at nearly all concentrations and temperatures in de-aerated conditions, which is why it is widely specified for HF alkylation units in refineries.
What is the difference between ASTM B564 and ASME SB564?
ASTM B564 is issued by ASTM International, while ASME SB564 is the equivalent specification adopted by the ASME Boiler and Pressure Vessel Code. The two are technically identical for Monel forged fittings and flanges; ASME SB564 is typically referenced for boiler and pressure-vessel code compliance.
Do you supply Mill Test Certificates with Monel flanges?
Yes. Every Monel flange from Kalpataru Piping is supplied with an EN10204 Type 3.1 Mill Test Certificate as standard. Type 3.2 third-party witnessed certification and additional QAP or radiography documentation can be arranged on request.
What is the typical lead time for Monel flanges?
Standard sizes in Monel 400 and Monel K500 are typically available ex-stock or within a short lead time; custom sizes, pressure classes, or Type 3.2 certification requirements may extend delivery. Contact our sales team with your specification for an accurate lead-time estimate.
What is the difference between a Monel Slip-On Flange and a Monel Weld Neck Flange?
A slip-on flange slides over the pipe end and is fillet-welded on both sides, making it easier and faster to install at lower pressure ratings. A weld neck flange has a tapered hub that is butt-welded to the pipe, giving superior stress distribution and making it the preferred choice for high-pressure, high-temperature, and cyclic-load services.
