Super Duplex Steel UNS S32750 Long Radius Bends
Introduction
Kalpataru Piping is a leading Manufacturer, Exporter, Supplier and Stockist of Super Duplex Steel UNS S32750 Long Radius Bends in India. We offer high strength, dimensional correctness super duplex steel, high tension power, corrosion resistant and consistency products like UNS S32750 super duplex steel 3D Pipe Bend, WNR 1.4539 super duplex steel Hot Induction Bends & super duplex steel Steel ASTM A815 UNS Ss32750 Pipe Bends. UNS S32750 Welded Pipe Bend using for high grade of raw material by using most ultra modern technology. UNS S32750 super duplex steel Piggable Bends are appropriate to use in drainage systems, their elongated bodies allowing proper discharge of wastes. WNR 1.4539 super duplex steel Long Radius Pipe Bends are also known as ‘high alloyed pipe bends’ as they contain small amounts of Molybdenum and super duplex steel, metals that render good corrosion resistance abilities. We offer wide range of ASTM A815 super duplex steel Steel UNS S32750 Pipe Bends such as super duplex steel UNS S32750 Long Radius Bend, super duplex steel UNS S32750 Piggable Bend, super duplex steel UNS S32750 Hot Induction Bend, super duplex steel UNS S32750 Seamless super duplex steel Pipe Bend, super duplex steel UNS S32750 Welded Pipe Bend, super duplex steel UNS S32750 U Pipe Bend, super duplex steel UNS S32750 J Pipe Bend, super duplex steel UNS S32750 Mitered Pipe Bend, super duplex steel UNS S32750 3D Pipe Bend in India. These super duplex steel steel UNS S32750 long radius bends are available in various sizes, shapes as per the requirements of our clients.
Standard Specification For Super Duplex Steel ASTM A815 Long Radius Pipe Bends
Specifications : ASTM A815 & ASME SA815
Dimensions : ASME/ANSI B16.9 / B16.28 and MSS SP-43 / SP-75
Size : Seamless Pipe Bends (1/2″ – 24″), ERW / Welded / Fabricated Pipe Bends (2″ – 36″)
Outer Diameter : 38.0 mm – 206.0 mm
Wall Thickness : 1.5 mm / 2.0 mm / 3.0 mm – greater wall thickness at request
Bend Radii : 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm
Bending Radius(R): R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Bending angle (θ): 15°, 30°, 45°, 60°, 90°, 135°, 180°
Grades : Super Duplex UNS S32750
Chemical Composition of Super Duplex Stainless Steel UNS S32750 Long Radius Pipe Bends
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| UNS S32750 | 0.030 max | 1.20 max | 0.80 max | 0.035 max | 0.020 max | 24.00 – 26.00 | 3.00 – 5.00 | 6.00 – 8.00 | 0.24 – 0.32 | 58.095 min |
Mechanical Properties of Super Duplex Steel UNS S32750 Long Radius Pipe Bend
| Grades | Density (g/cm 3) | Density (lb/in 3) | Melting Point (°C) | Melting Point (°F) |
| UNS S32750 | 7.8 | 0.281 | 1350 | 2460 |
Related Products
FAQ’s About ASTM A106 Grade B Pipes
What is ASTM A106 Grade B pipe?
ASTM A106/A106M Grade B is a seamless carbon steel pipe specification intended for high-temperature service. The exact project suitability depends on the governing piping code, design conditions and purchase specification.
What is the difference between ASTM A106 Grade B and ASTM A53 Grade B?
ASTM A106 Grade B is a seamless high-temperature-service pipe specification. ASTM A53 Grade B covers welded and seamless pipe for mechanical and pressure applications and ordinary steam, water, gas and air service. Select the specification required by the project and design code.
What sizes does Kalpataru supply?
The current brief lists a Kalpataru supply range of 1/2 to 36 in NPS and Schedule 10 to XXS, subject to size and availability. ASTM A106/A106M itself has a wider standard scope.
What is the maximum temperature of ASTM A106 Grade B pipe?
Do not use one universal maximum temperature from the ASTM material specification. Allowable service depends on the design code, pressure, wall thickness, allowable stress and project conditions.
Is ASTM A106 Grade B seamless or welded?
ASTM A106/A106M is a seamless carbon steel pipe specification. Do not describe ERW, LSAW or other welded pipe as ASTM A106 product construction.
What tests are required for ASTM A106 Grade B pipe?
The specification includes mechanical testing and bend/flattening testing as applicable, together with hydrostatic and/or nondestructive electric testing requirements. The exact inspection package should match the current ASTM edition and purchase order.
What documents can be supplied?
Orders can be supplied with EN 10204 3.1 MTC and, where applicable and agreed, IBR documentation, third-party inspection and project-specific test reports.
How is ASTM A106 Grade B pipe priced?
Price depends on NPS, schedule or wall thickness, length, quantity, origin/mill, testing/certification, coating/end preparation and delivery destination. Send the full requirement for a size-wise quotation.
