Stainless Steel 446 Long Radius Bends
Stainless Steel 446 Long radius Bends Supplier, manufacturer, Exporter in India.
ASTM A403 446 Stainless Steel Long Radius Bend, Stainless Steel 446 Piggable Bends, Werkstoff No 1.4762 Stainless Steel High Pressure Bending Supplier in Mumbai, India.
Introduction
Kalpataru Piping is a leading Manufacturer, Exporter, Supplier and Stockist of Stainless Steel 446 Long Radius Bends in India. Stainless Steel 446 Long Radius Bends with low carbon content. That’s why, this renders exceptional formability and weldability, annealed and fabricated to enhance better performance, high strength against rupture making them suitable for irrigation and agriculture covering heavy fluid flow and thus, this, in turn, required strength and reinforcement. short radius bend and long radius bend – to which both of them are having a midpoint-to- midpoint length, along with double the indistinguishable 90 degree elbow. The most important application for these pipe fittings is in heater coils and heat exchangers. This ANSI B16.9 Stainless Steel 446 Long Radius Bends allow purport insertion of pipes due to its long bodies and Keene so room for leakage and also help in maximizing drainage of waste. Also, it’s provides cleaning and hygiene for food-related processing. Our SS 446 Long Radius Bend and SS 347h Long Radius Bend have high demand over the international market. Stainless Steel ASTM A403 446 Pipe Bends such as SS 446 Long Radius Bend, SS 446 Piggable Bend, SS 446 Hot Induction Bend, SS 446 Seamless Pipe Bend, SS 446 Welded Pipe Bend, SS 446 U Pipe Bend, SS 446 J Pipe Bend, SS 446 Mitered Pipe Bend, SS 446 3D Pipe Bend etc. These stainless steel 446 long radius bends are available in various sizes, shapes as per the requirements of our clients.
Specifications of Stainless Steel 446 Long Radius Bends:
Grade: 446
Standards: ASTM / ASME
Designation: A403 / SA403
Dimension Standard: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size: Seamless 1/2″ to 24″ , Welded 1/2″ to 24″, Two Joint / Two Halve Fittings 6″ to 48″
Thickness: Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS.
Equivalent Grades of Stainless Steel 446 Long Radius Bends:
| STANDARD | UNS | WERKSTOFF NR. |
| SS 446 | S44600 | 1.4762 / 3 |
Stainless Steel 446 Long Radius Bends Chemical Properties:
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni |
| SS 446 | 0.2 max | 1.5 max | 0.75 max | 0.040 max | 0.030 max | 11.5 – 23.00 | – | 0.50 max |
Stainless Steel 446 Long Radius Bends Mechanical Properties:
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.5 g/cm3 | 1510 °C (2750 °F) | Psi – 75,000 , MPa – 485 | Psi – 40,000 , MPa – 275 | 20 % |
Related Products
Inconel 625 Forged Fittings Exporter | Countries and Cities We Supply To
Kalpataru Piping Solutions exports Inconel 625 forged fittings and nickel alloy 625 forgings to over 40 countries worldwide. Our major export destinations include: United States (Houston, Los Angeles, New York), United Kingdom (London, Aberdeen), UAE (Dubai, Abu Dhabi, Sharjah), Saudi Arabia (Dammam, Riyadh, Jubail), Canada (Calgary, Edmonton), Australia (Perth, Brisbane), Germany (Hamburg, Dusseldorf), Netherlands (Rotterdam, Amsterdam), Singapore, Malaysia (Kuala Lumpur), South Korea (Busan, Seoul), Brazil (Rio de Janeiro, Sao Paulo), South Africa (Johannesburg, Durban), Italy (Genoa, Milan), France (Paris, Marseille), Norway (Stavanger, Bergen), and all GCC and Southeast Asian markets.
FAQs - ASTM A53 Grade B Pipe
What is Nickel 200 seamless pipe used for?
Nickel 200 seamless pipe is used wherever maximum corrosion resistance and purity are needed, including oil & gas drilling, chemical processing, food-grade equipment, and marine piping systems.
What is the difference between Nickel 200 and Nickel 201 pipe?
Nickel 200 has a higher carbon content suited to general service below 315°C, while Nickel 201 has low carbon content designed for high-temperature applications above 315°C, avoiding embrittlement issues.
What size range do you supply for Nickel 200 seamless pipes and tubes?
Kalpataru Piping supplies Nickel 200 pipes and tubes in sizes from 4 mm to 219 mm, with wall thickness from 0.5 mm to 20 mm, and lengths up to 13,500 mm, fully customisable to your project.
Do you provide mill test certificates with every order?
Yes, every consignment of Nickel 200 seamless pipe is supplied with EN 10204 3.1 or 3.2 mill test certificates, and third-party inspection can be arranged on request.
Is Nickel 200 pipe suitable for high-temperature applications?
Nickel 200 performs well up to around 315°C (600°F). For higher-temperature service, we recommend Nickel 201, which has a low-carbon composition designed to resist embrittlement at elevated temperatures.
Can Kalpataru Piping supply custom Nickel 200 pipe sizes and forms?
Yes, we manufacture custom sizes, thicknesses, and forms including round, square, rectangular, and hydraulic tube, tailored precisely to your project drawing or specification.
Do you export Nickel 200 seamless pipes and tubes internationally?
Yes, Kalpataru Piping exports Nickel 200 seamless pipes and tubes to over 40 countries worldwide, with complete documentation, secure packing, and reliable shipping support.
