Incoloy 800/ 800H/ 800HT Perforated Sheet
Inconel 800/ 800H/800HT Perforated Sheets Supplier, Manufacturer, Exporter in India
ASTM B168 Incoloy 800/ 800H/ 800HT Perforated Sheet Supplier, Manufacturer, Exporter in India
Introduction
Kalpataru piping is one of the leading Manufacturer, Supplier, Exporter of Incoloy 800/ 800H/ 800HT Perforated Sheets in India. Incoloy 800/ 800H/ 800HT Perforated Sheets are incoloy-chromium alloy with an addition of aluminum for outstanding resistance to oxidation and other forms of high temperature corrosion. These Incoloy 800/ 800H/ 800HT Perforated Sheets (UNS N08800) are used for Heat treating muffles and retorts, Catalyst support grids in nitric acid production, Radiant tubes, Steam super-heater tube supports, and more. Incoloy 800/ 800H/ 800HT Perforated Sheets are also used in fabricated combustion chambers, tube supports and ash trays in the power generation industry. Incoloy 800/ 800H/ 800HT Perforated Sheets is a solid solution incoloy chromium heat resisting alloy which gives outstanding performance at temperatures up to about 1800°C. Incoloy 800/ 800H/ 800HT Perforated Sheets also has good aqueous corrosion resistance due to the high incoloy content in combination with chromium. Strength and toughness incoloy are good, and are retained during extended service at high temperature. incoloy 800 perforated sheet has good resistance to nitriding in diincoloyociated ammonia, and is only outperformed by Incoloy 800/ 800H/ 800HT Perforated Sheets in this application. incoloy 800 Rolling perforated sheet has good strength, ductility and toughneincoloy, and can be used at cryogenic temperatures. incoloy 800 Flat perforated sheet is a incoloy alloy and available in the various forms including incoloy Alloy 800 perforated sheet & incoloy 800 Perforated perforated sheet etc. incoloy 800 Rolling perforated sheet has good high temperature strength and retains its ductility after long service exposure, with good corrosion resistance under oxidizing conditions. incoloy 800 Hot rolled perforated sheet is very resistant to high-temperature oxidation – up to 2800 º F – and its also has good resistance to aqueous corrosion. incoloy 800 Clad perforated sheets are suitable to use at elevated temperatures. We offer incoloy 800 perforated sheet, incoloy 800 perforated sheet are in different sizes, specifications and shapes as per demands of our esteemed customers.
SPECIFICATIONS
Incoloy 800/ 800H/ 800HT Perforated Sheets :
Size : 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH
Specification : ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443
Standard : ASTM, ASME and API
Specialize : Shim Sheet, Perforated Sheet, B. Q. Profile.
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Incoloy 800/ 800H/ 800HT Perforated Sheets STRUCTURALS EQUIVALENT GRADES
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
Incoloy 800/ 800H/ 800HT Perforated Sheets CHEMICAL COMPOSITION
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60ᴬ | 0.15 – 0.60ᴬ |
ASTM B168 Incoloy 800/ 800H/ 800HT Perforated Sheets MECHANICAL & PHYSICAL PROPERTIES:
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Incoloy 800 / 800H / 800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
Related Products
- Incoloy 800/800H/800T Instrumentation Valves
- Incoloy 800/800H/800T Filler Wire
- Incoloy 800/800H/800T Long Radius Bends
- Incoloy 800/800H/800T Pipes Spools
- Incoloy 800/800H/800T Wiremesh
- Incoloy 825 Instrumentation Valves
- Incoloy 825 Filler Wire
- Incoloy 825 Long Radius Bends
- Incoloy 825 Pipes Spools
- Incoloy 825 Wiremesh
FAQ’s About ASTM A106 Grade B Pipes
What is ASTM A106 Grade B pipe?
ASTM A106/A106M Grade B is a seamless carbon steel pipe specification intended for high-temperature service. The exact project suitability depends on the governing piping code, design conditions and purchase specification.
What is the difference between ASTM A106 Grade B and ASTM A53 Grade B?
ASTM A106 Grade B is a seamless high-temperature-service pipe specification. ASTM A53 Grade B covers welded and seamless pipe for mechanical and pressure applications and ordinary steam, water, gas and air service. Select the specification required by the project and design code.
What sizes does Kalpataru supply?
The current brief lists a Kalpataru supply range of 1/2 to 36 in NPS and Schedule 10 to XXS, subject to size and availability. ASTM A106/A106M itself has a wider standard scope.
What is the maximum temperature of ASTM A106 Grade B pipe?
Do not use one universal maximum temperature from the ASTM material specification. Allowable service depends on the design code, pressure, wall thickness, allowable stress and project conditions.
Is ASTM A106 Grade B seamless or welded?
ASTM A106/A106M is a seamless carbon steel pipe specification. Do not describe ERW, LSAW or other welded pipe as ASTM A106 product construction.
What tests are required for ASTM A106 Grade B pipe?
The specification includes mechanical testing and bend/flattening testing as applicable, together with hydrostatic and/or nondestructive electric testing requirements. The exact inspection package should match the current ASTM edition and purchase order.
What documents can be supplied?
Orders can be supplied with EN 10204 3.1 MTC and, where applicable and agreed, IBR documentation, third-party inspection and project-specific test reports.
How is ASTM A106 Grade B pipe priced?
Price depends on NPS, schedule or wall thickness, length, quantity, origin/mill, testing/certification, coating/end preparation and delivery destination. Send the full requirement for a size-wise quotation.
