SMO 254 Compression Tube Fitting
Introduction
Kalpataru piping is leading Manufacturers, Exporters and Supplier of Wide range SMO 254 compression tube fitting that are using high quality raw materials in mumbai, India. SMO 254 compression Tube Fittings, which is used in wide – ranging commercial and industrial sectors. SMO 254 Compression Tube Fittings include petroleum production, saltwater handling, food processing and chemical processing equipment, pulp mill bleach systems, flue gas desulfurization scrubbers and tall oil distillation columns. SMO 254 Tube Fittings available in forms like SMO 254 Female Elbow, SMO 254 Female Adapter, SMO 254 Female Run Tee, SMO 254 Tube Nut, SMO 254 Street Tee, SMO 254 Blanking End, SMO 254 Union Cross, SMO 254 Back Ferrule, SMO 254 Female Connector, SMO 254 Blanking Plug, SMO 254 Male Connector, SMO 254 Tube To Tube Union, SMO 254 Male Bulkhead Connector, SMO 254 Hex Nipple, SMO 254 Male Adapter, SMO 254 Male Branch Tee, SMO 254 Front Ferrule, SMO 254 Male Run Tee, SMO 254 Bushing, SMO 254 Female Bulkhead Connector, SMO 254 Female Branch Tee, SMO 254 Cap, SMO 254 Plug, SMO 254 Male Elbow, SMO 254 Hex Coupling, SMO 254 Union Ball Joint, SMO 254 Street Elbow
Specification
| Specifications | : | ASTM A403 ASME SA 182 |
| Tube Size | : |
1/16”OD to 2”OD, 2mm OD to 50mm OD
|
| Thread | : | NPT, BSP,BSPT, UFO, ISO, SAE, etc |
| Pressure Rating | : |
6000PSI for SMO |
SMO 254 Compression Tube Fittings Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | SIS | GOST | AFNOR | EN |
| SMO 254 | 1.4547 | S31254 | – | 2378 | – | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 |
Chemical Composition of Grade SMO 254 Compression Tube Fittings
| Grade | % | Ni | Cr | Mo | Cu | N | C | Mn | Si | P | S |
| SMO 254 | Min. | 17.5 | 19.5 | 6 | 0.5 | 0.18 | |||||
| Max. | 18.5 | 20.5 | 6.5 | 1 | 0.22 | 0.02 | 1 | 0.8 | 0.03 | 0.01 |
Mechanical Properties of SMO 254 Compression Tube Fitttings
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| SMO 254 | 8.0 g/cm3 | 1320-1390 ℃ | 650 | 300 | 35 % |
SMO 254 compression tube fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
SMO 254 compression tube fittings Application Industries
- 254 SMO Tube Union
- 254 SMO Male Connector
- 254 SMO Female Connector
- 254 SMO Male Bulkhead Connector
- 254 SMO Female Bulkhead Connector
- 254 SMO Street Elbow
- 254 SMO Male Elbow
- 254 SMO Female Elbow
- 254 SMO Street Tee
- 254 SMO Male Run Tee
- 254 SMO Female Run Tee
- 254 SMO Male Branch Tee
- 254 SMO Female Branch Tee
- 254 SMO Union Cross
- 254 SMO Male Adapter
- 254 SMO Female Adapter
- 254 SMO Bushing
- 254 SMO Hex Coupling
- 254 SMO Hex Nipple
- 254 SMO Cap
- 254 SMO Plug
- 254 SMO Allen Key
- 254 SMO Union Ball Joint
- 254 SMO Blanking End
- 254 SMO Blanking Plug
- 254 SMO Tube Nut
- 254 SMO Front Ferrule
- 254 SMO Back Ferrule
Related Products
FAQ’s About Monel Flanges
What is the maximum service temperature for Monel 400 flanges?
Monel 400 flanges can be used up to approximately 550°C (1022°F) in non-oxidizing conditions, making them suitable for high-temperature chemical processing and steam applications.
Can Monel flanges be used with hydrofluoric acid?
Yes. Monel 400 is the industry-standard material for handling hydrofluoric acid at nearly all concentrations and temperatures in de-aerated conditions, which is why it is widely specified for HF alkylation units in refineries.
What is the difference between ASTM B564 and ASME SB564?
ASTM B564 is issued by ASTM International, while ASME SB564 is the equivalent specification adopted by the ASME Boiler and Pressure Vessel Code. The two are technically identical for Monel forged fittings and flanges; ASME SB564 is typically referenced for boiler and pressure-vessel code compliance.
Do you supply Mill Test Certificates with Monel flanges?
Yes. Every Monel flange from Kalpataru Piping is supplied with an EN10204 Type 3.1 Mill Test Certificate as standard. Type 3.2 third-party witnessed certification and additional QAP or radiography documentation can be arranged on request.
What is the typical lead time for Monel flanges?
Standard sizes in Monel 400 and Monel K500 are typically available ex-stock or within a short lead time; custom sizes, pressure classes, or Type 3.2 certification requirements may extend delivery. Contact our sales team with your specification for an accurate lead-time estimate.
What is the difference between a Monel Slip-On Flange and a Monel Weld Neck Flange?
A slip-on flange slides over the pipe end and is fillet-welded on both sides, making it easier and faster to install at lower pressure ratings. A weld neck flange has a tapered hub that is butt-welded to the pipe, giving superior stress distribution and making it the preferred choice for high-pressure, high-temperature, and cyclic-load services.
