Titanium Alloy Gr 7 Plates And Titanium Alloy Gr 7 Sheet
Titanium werkstoff nr. 3.7035 Plates, Sheets & Coils Manufacturer, Exporter & Suppliers in India.
ASTM B265 GR -7 UNS R56400 Titanium Shim Sheet, Chequered Plate Suppliers.
Introduction
Kalpataru Piping are one of the leading Manufacturers, Exporters and Supplier of high quality Titanium gr. 7 Plates, Sheets in mumbai, India. We are manufactured these Titanium Alloy Gr 7 Plates, Sheets as per the national & international quality standards. We also offer the complete range of grades like Titanium GR I, GR -5, GR-3, GR-4, GR-5, GR-7 Plates, Sheets & Coils as per the clients requirements. These Titanium Gr 7 Sheets & Plates are available different dimensions, specification & thickness as per the clients requirements. Titanium Grade 7 Plates as well has some other excellent features to offer such as hard-wearing, light weight, soaring tensile potency and so on. Superior quality steel. Titanium Gr 7 Plates can be cold rolled to various tempers. Post-work annealing here is required to re-attain optimum performance characteristics. These are widely used in manufacturing many industrial components, machineries and spares. Kalpataru Piping is offer Titanium Grade 7 perforated perforated sheets in any size, shapes, dimension etc as per customer requirement.
Titanium Alloy Gr 7 Sheet / Titanium Alloy Gr 7 Plates Specifications
| Specifications | : | ASTM / ASME SB265 |
| Size | : | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | : | 0.1mm to 12 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Titanium Alloy Gr 7 Sheet and Titanium Alloy Gr 7 Plates Chemical Composition
| Grade | Ti | C | Fe | H | N | O | Al | V |
| Ti Grade 7 | 90 min | – | 0.25 max | – | – | 0.2 max | 6 min | 4 min |
Titanium Alloy Gr 7 Plates and Titanium Alloy Gr 7 Sheets Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Titanium Gr. 5 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
Equivalent Grades for Gr 7 Titanium Plates & Gr 7 Titanium Sheets
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr. 7 | 3.7165 | N56400 |
Related Products
Frequently Asked Questions
What's the difference between Monel 400 and Monel K500 fasteners?
Monel 400 is the standard, lower-cost grade for general corrosion resistance in chemical, marine, and acid service. Monel K500 is age-hardened for roughly double the tensile strength, at a 30–50% cost premium, and earns that premium on high-load or wear applications like shafting and pump components. See our full comparison on the Monel 400 Fasteners page.
Which Monel grade should I use for marine fasteners?
Monel 400 covers the vast majority of marine fastening needs — seawater piping, deck hardware, and general corrosion resistance. Reach for Monel K500 specifically when the application also carries a real mechanical load, like propeller shafting or pump hardware.
Do you supply custom or coated Monel fasteners?
Yes — custom head marking, thread locking compounds, and surface coatings are all available on request, in addition to standard mill-finish fasteners.
What is the minimum order quantity for Monel fasteners?
We run zero MOQ across both grades. Standard sizes are ex-stock in Mumbai for fast dispatch; anything outside standard stock is manufactured to order with no minimum quantity requirement.
What certificates come standard with Monel fasteners?
Every order ships with an EN 10204 3.1 mill test certificate. PMI, third-party inspection (TPI), and NABL-accredited lab reports are available on request for critical applications.
What is the HS code for Monel fasteners?
Generally 7318.15.00, though it's worth confirming the exact classification with your customs broker since it can vary slightly by destination country.
What industries typically use Monel fasteners?
Chemical and petrochemical processing, oil and gas (including sour service), marine and shipbuilding, and defense/aerospace account for the large majority of demand, with occasional specialty use in coastal construction hardware.
What payment and delivery terms do you offer?
We accept LC, TT/wire transfer, and cheque, with export-grade packaging and dispatch from Mumbai or Kalamboli ports. See the Packaging, Payment & Delivery section above for details.
Need Monel 400 Wire Mesh You Can Actually Rely On?
Tell us your mesh count, weave, and quantity, and we'll get you a quote with a real lead time — not a generic price list. Specifying a full system? Run the numbers first with our pipe & tube weight calculator or plates & sheets weight calculator.
