Incoloy 800/ 800H/ 800HT Forged Fittings
ASTM B564 Incoloy 800 Forged Threaded Bushing, Incoloy 800H Socket Weld Cap, Incoloy Alloy 800HT Bull Plug Supplier
Incoloy Alloy 800/800H/800HT Forged Fittings Suppliers, manufacturer, exporter, stockist, wholesaler in India
Introduction
Kalpataru piping is one of the leading manufacturer, suppliers, exporter, stockist of Incoloy 800/ 800H/ 800HT Forged Fittings in India as well as all over the world. Incoloy 800 forged fitting, Incoloy 800H forged fitting, incoloy 800HT Forged Fitting are used in Offshore rigs and onshore petrochemical plants and oil refineries, process plant for pharmaceuticals, surfactants, chemicals and additives, energy (Gas and Electricity), Nuclear and Defence industries, marine and Shipbuilding, paper and pulp plant, anywhere there is corrosion/high or low temperature/pressure. Incoloy 800 Forged Fittings to most national and international standards are available, including ASME B16.11 and BS3799, Incoloy 800 Socket Weld and Incoloy 800 Screwed Fittings, ASME B16.5, ASME B16.47, BS EN1092 (BS 4504), BS 10, DIN, UNI, NF E 29. We have probably the largest stock of Incoloy 800 threaded pipe fittings in India as well as in globe market. Incoloy 800 Forged Threaded Elbow (UNS N08800) is extremely resistant to corrosion, even in acidic environment. Incoloy 800H Forged Threaded Tee (UNS N08810) is excellent resistance to oxidation, sulfidation, and carburization. Heat treatment retorts, muffles jigs and fixtures. Incoloy 800HT Forged Threaded Cross (UNS N08811) to a great effect. Our Alloy 800 Forged Threaded Fittings are resistant to embrittlement from precipitation of sigma phase and chloride stress – corrosion cracking due to the nickel content.
Equivalent Grades of Incoloy 800/ 800H/ 800HT Forged Fittings:
| Standard | Incoloy 800 | Incoloy 800H | Incoloy 800HT |
| UNS | N08800 | N08810 | N08811 |
| WERKSTOFF NR. | 1.4876 | 1.4958 / 1.4876 | 1.4859 / 1.4876 |
| AFNOR | Z8NC32-21 | Z8NC33-21 | – |
| JIS | NCF 800 | NCF 800H | NCF 800HT |
| GOST | ЭИ670 | ЭИ670 | ЭИ670 |
| OR | XH32T | XH32T | XH32T |
| EN | X10NiCrAlTi32-20 | X5NiCrAlTi31-20 | X8NiCrAlTi32-21 |
| BS | NA 15 | NA 15(H) | NA 15(HT) |
Specification of Incoloy 800/ 800H/ 800HT Forged Fittings:
| Grades | : | Incoloy 800 – UNS N08800, Incoloy 800H / HT – UNS N08810/N08811 |
| Standards | : | ASTM, ASME ANSI B16.11 & BS3799, etc. |
| Specifications | : | ASTM B 564 / ASME SB 564 |
| Size | : | 1/2″NB TO 4″NB IN |
| Class | : | 2000LBS, 3000LBS, 6000LBS, 9000LBS, etc. |
| Type | : | Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT, Threaded Fittings |
Chemical Properties of Incoloy 800/ 800H/ 800HT Forged Fittings:
| Incoloy 800 | Ni | Fe | Cr | Cu | Ti | Al | C | Mn | S | Si |
| 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .15-.60 | .15-.60 | .1 max | 1.5 max | .015 max | 1.0 max | |
| Incoloy 800H | Ni | Fe | Cr | Cu | Ti | Al | C | Mn | S | Si |
| 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .15-.60 | .15-.60 | .05-.10 max | 1.5 max | .015 max | 1.0 max | |
| Incoloy 800HT | Ni | Fe | Cr | Cu | Ti | Al | C | Mn | S | Si |
| 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .25-.60 | .85-1.20 | .06-.10 max | 1.5 max | .015 max | 1.0 max |
Mechanical Properties of Incoloy 800/ 800H/ 800HT Forged Fittings:
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Incoloy 800 | 7.94 g/cm3 | 1350-1400 ℃ | 500 | 205 | 30 – 35 % |
| Incoloy 800H | 7.94 g/cm3 | 1350-1400℃ | 500 | 200 | 30 – 35 % |
| Incoloy 800HT | 7.94 g/cm3 | 1350-1400℃ | 500 | 200 | 30 – 35 % |
Related Products
- Incoloy 800/800H/800T Instrumentation Valves
- Incoloy 800/800H/800T Filler Wire
- Incoloy 800/800H/800T Long Radius Bends
- Incoloy 800/800H/800T Pipes Spools
- Incoloy 800/800H/800T Wiremesh
- Incoloy 825 Instrumentation Valves
- Incoloy 825 Filler Wire
- Incoloy 825 Long Radius Bends
- Incoloy 825 Pipes Spools
- Incoloy 825 Wiremesh
FAQ’s About ASTM A106 Grade B Pipes
What is ASTM A106 Grade B pipe?
ASTM A106/A106M Grade B is a seamless carbon steel pipe specification intended for high-temperature service. The exact project suitability depends on the governing piping code, design conditions and purchase specification.
What is the difference between ASTM A106 Grade B and ASTM A53 Grade B?
ASTM A106 Grade B is a seamless high-temperature-service pipe specification. ASTM A53 Grade B covers welded and seamless pipe for mechanical and pressure applications and ordinary steam, water, gas and air service. Select the specification required by the project and design code.
What sizes does Kalpataru supply?
The current brief lists a Kalpataru supply range of 1/2 to 36 in NPS and Schedule 10 to XXS, subject to size and availability. ASTM A106/A106M itself has a wider standard scope.
What is the maximum temperature of ASTM A106 Grade B pipe?
Do not use one universal maximum temperature from the ASTM material specification. Allowable service depends on the design code, pressure, wall thickness, allowable stress and project conditions.
Is ASTM A106 Grade B seamless or welded?
ASTM A106/A106M is a seamless carbon steel pipe specification. Do not describe ERW, LSAW or other welded pipe as ASTM A106 product construction.
What tests are required for ASTM A106 Grade B pipe?
The specification includes mechanical testing and bend/flattening testing as applicable, together with hydrostatic and/or nondestructive electric testing requirements. The exact inspection package should match the current ASTM edition and purchase order.
What documents can be supplied?
Orders can be supplied with EN 10204 3.1 MTC and, where applicable and agreed, IBR documentation, third-party inspection and project-specific test reports.
How is ASTM A106 Grade B pipe priced?
Price depends on NPS, schedule or wall thickness, length, quantity, origin/mill, testing/certification, coating/end preparation and delivery destination. Send the full requirement for a size-wise quotation.
