Incoloy 825 Buttweld Fittings
825 Incoloy End Cap, Incoloy UNS N08825 Seamless Pipe Fittings, ANSI B16.9 Incoloy 825 Welded Buttweld Fittings, 825 Incoloy End Cap, ASTM B366 825 Incoloy 90 degree Elbow Exporters and Suppliers in Mumbai, India.
Incoloy 825 Welded Buttweld Fittings, Incoloy 825 Pipe Fittings, Incoloy 825® Alloy Pipe bend, Inconel 5d Bend, 825 Incoloy End Cap, 825 Incoloy Pipe Cap, Incoloy WERKSTOFF NR. 2.4858 Cross Supplier, Manufacturer, Exporter in India.
Introduction
Kalpataru Piping is one of the leading manufacturer, suppliers, exporter, stockist of Incoloy 825 Buttweld Fittings in India. Incoloy 825 Buttweld Fittings have durability and sturdiness. Incoloy 825 Buttweld Fittings (UNS N08825) has good resistance in neutral chloride media, stress – corrosion cracking and satisfactory resistance to pitting and crevice corrosion. Incoloy 825 buttweld fittings are used in industry such as Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry, Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemical, Pharmaceuticals. Incoloy 825 Buttweld Fittings in customized thicknesses and sizes according to customer requirement. we offer these Incoloy 825 Buttweld Fittings in various sorts.
ASTM B366 INCOLOY Buttwled FITTING SPECIFICATION:
- Specifications : ASTM B366 / ASTM SB 366
- Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
- Size : ½”NB to 24″NB in Sch 10s, 40s, 80s, 160s, XXS.
- SCH :10, 20, 40, STD, 60, 80, XS
- Type : Seamless / Welded / Fabricated
- Grade :Incoloy 825 – UNS N08825
INCOLOY 825 Buttweld FITTING EQUIVALENT GRADE:
| STANDARD | WERKSTOFF NR. | UNS | AFNOR | GOST | JIS | BS | EN | OR |
| Incoloy | 2.4858 | N08825 | NC 21 FeDU | XH38BT | NCF 825 | NA 16 | NiCr21Mo | ЭП703 |
INCOLOY 825 Buttwled FITTING CHEMICAL COMPOSITION:
| Grade | Cr | Fe | Ni | C | Mn | Cu | Si | S |
| Incoloy 825 | 19.5 – 23.5 | 1.0 max | 38.0 – 46.0 | 0.05 max | 1.0 max | 1.5 – 3.0 | 0.5 max | 0.03 max |
Incoloy 825 Buttweld FITTING MECHANICAL PROPERTIES:
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Related Products
- Incoloy 800/800H/800T Instrumentation Valves
- Incoloy 800/800H/800T Filler Wire
- Incoloy 800/800H/800T Long Radius Bends
- Incoloy 800/800H/800T Pipes Spools
- Incoloy 800/800H/800T Wiremesh
- Incoloy 825 Instrumentation Valves
- Incoloy 825 Filler Wire
- Incoloy 825 Long Radius Bends
- Incoloy 825 Pipes Spools
- Incoloy 825 Wiremesh
Frequently Asked Questions
What's the difference between Monel 400 and Monel K500 fasteners?
Monel 400 is the standard, lower-cost grade for general corrosion resistance in chemical, marine, and acid service. Monel K500 is age-hardened for roughly double the tensile strength, at a 30–50% cost premium, and earns that premium on high-load or wear applications like shafting and pump components. See our full comparison on the Monel 400 Fasteners page.
Which Monel grade should I use for marine fasteners?
Monel 400 covers the vast majority of marine fastening needs — seawater piping, deck hardware, and general corrosion resistance. Reach for Monel K500 specifically when the application also carries a real mechanical load, like propeller shafting or pump hardware.
Do you supply custom or coated Monel fasteners?
Yes — custom head marking, thread locking compounds, and surface coatings are all available on request, in addition to standard mill-finish fasteners.
What is the minimum order quantity for Monel fasteners?
We run zero MOQ across both grades. Standard sizes are ex-stock in Mumbai for fast dispatch; anything outside standard stock is manufactured to order with no minimum quantity requirement.
What certificates come standard with Monel fasteners?
Every order ships with an EN 10204 3.1 mill test certificate. PMI, third-party inspection (TPI), and NABL-accredited lab reports are available on request for critical applications.
What is the HS code for Monel fasteners?
Generally 7318.15.00, though it's worth confirming the exact classification with your customs broker since it can vary slightly by destination country.
What industries typically use Monel fasteners?
Chemical and petrochemical processing, oil and gas (including sour service), marine and shipbuilding, and defense/aerospace account for the large majority of demand, with occasional specialty use in coastal construction hardware.
What payment and delivery terms do you offer?
We accept LC, TT/wire transfer, and cheque, with export-grade packaging and dispatch from Mumbai or Kalamboli ports. See the Packaging, Payment & Delivery section above for details.
Need Monel 400 Wire Mesh You Can Actually Rely On?
Tell us your mesh count, weave, and quantity, and we'll get you a quote with a real lead time — not a generic price list. Specifying a full system? Run the numbers first with our pipe & tube weight calculator or plates & sheets weight calculator.
