Titanium Alloy Gr 2 Round Bars & Titanium Alloy Gr 2 Wires
Titanium Gr 2 werkstoff nr. 3.7035 Round Bars and Wires Manufacturer, Exporter & Suppliers in India.
ASTM B 348 / 863 Gr 2 UNS R50400 Round Bars and Wires Suppliers.
Introduction
Kalpataru piping solutions is leading manufacturer, supplier, exporters and stoickest for high quality Titanium Alloy Gr 2 Round Bars & Titanium Alloy Gr 2 Wires. Kalpataru piping solutions offer a complete range of Titanium Alloy Titanium Alloy Gr 2 Round Bars & Titanium Alloy Gr 2 Wires as Round, Square, Hex (A/F), Bush, Rectangle , Flat, Wire Mesh. We are manufactured these using high quality raw materials.Titanium Alloy Gr2 Round bars and Wires are widely in chemicals and petro-chemicals Plants, desalination plants, paper & pulp Industries, automotive etc. Kalpataru piping solutions export, Supply & Manufacture Titanium Alloy forms like seamless pipe, tubes, plates, sheets, shims, hastelloy, round bars, wires, Instrumentation Valves, valves, spools and many others.
Equivalent Grades of Titanium Alloy Gr 2 Round Bars & Titanium Alloy Gr 2 Wires
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr2 | 3.7035 | R50400 |
Specifications of Titanium Alloy Gr2 Round Bars & Titanium Alloy Gr 2 Wires
| Range | : | 8mm – 200mm |
| Wier Range | : | 0.03mm – 6.0mm |
| Standards | : | ASTM B348 / ASME B348, ASTM B 863 / ASME SB 863. |
| Length | : | Random, Fix & Cut Length |
| Finish | : | Bright, Polish & Black |
| Form | : | Round, Square, Hex (A/F), Bush, Rectangle , Flat, Wire Mesh |
Chemical Composition of Titanium Alloy Gr 2 Round Bars & Titanium Alloy Gr 2 Wires
| Grade | C | N | O | H | Ti | Fe |
| Titanium Gr 2 | 0.10 max | 0.03 max | 0.25 max | 0.015 max | bal | 0.30 max |
Mechanical & Physical Properties of Titanium Alloy Gr 2 Round Bars & Titanium Alloy Gr 2 Wires
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Gr.2 | 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20 % |
| Gr.5 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
Types of Titanium Alloy Gr2 Round Bars & Titanium Alloy Gr 2 Wires
- Titanium Gr 2 Bars
- Titanium Forged Round Bars
- Titanium Gr 2 Square Bars
- Titanium Hollow Bar
- Titanium Black Bars
- Titanium Hexagon Bars
- Titanium Cold Drawn Bars
- Titanium Gr 2 Bright Bars
- Titanium Spring Steel Bars
- Titanium Hex Bars
- Titanium Wire Bobbin
- Titanium Wire Coil
- Titanium Filler Wire
Marking & Packing Of Titanium Alloy Gr 2 Round Bars & Titanium Alloy Gr 2 Wires
Kalpataru Piping Solutions pack Titanium Alloy Gr2 Round bars and Wires properly and carefully to ensure that there is no damage to the Titanium Alloy Gr2 Round bars and Wires during the transit. We pack Titanium Alloy Gr2 Round bars and Wires in wooden boxes and supply it all over the world.
High-Quality Titanium Alloy Gr2 Round Bars & Titanium Alloy Gr 2 Wires – Quality Assurance!
Kalpataru Piping Solutions Is One Of The Most Trusted Exporter, Supplier, Stockist & Manufacturer Of Titanium Alloy Gr2 Round bars and Wires. Kalpataru Piping Solutions Offers High-Quality Titanium Alloy Gr2 Round bars and Wires. We Inspect Our Titanium Alloy Gr2 Round bars and Wires At Each Stage Of Production Process, To Make Sure That The Quality Of The Titanium Alloy Gr2 Round bars and Wires Is Not Compromised. They Are Examined To Confirm Their Standards And We Also Offer Third Party Inspection Of Our Titanium Alloy Gr2 Round bars and Wires On Demand Of Our Clients. Kalpataru piping solutions even Offer Test Certificates For Our Titanium Alloy Gr2 Round bars and Wires.
We Pack Titanium Alloy Gr2 Round bars and Wires Properly And Carefully To Ensure That There Is No Damage To Titanium Alloy Gr2 Round bars and Wires During The Transit. We Pack copper Titanium Alloy Gr2 Round bars and Wires in Wooden Boxes And Supply It All Over The World.
Why Choose Kalpataru Piping Solutions For Buying Titanium Alloy Gr 2 Round Bars & Titanium Alloy Gr 2 Wires?
- Huge Stock Of Titanium Alloy Gr 2 Round Bars & Titanium Alloy Gr 2 Wires.
- Large Production Capacity Of Titanium Alloy Gr2 Round Bbars & Titanium Alloy Gr 2 Wires
- Kalpataru Piping Solutions Offer Highest Quality Titanium Alloy Gr 2 Round Bbars & Titanium Alloy Gr 2 Wires At best Price.
- We Offer Customised Sizes For Titanium Alloy Gr 2 Round Bars & Titanium Alloy Gr 2 Wires Depending On Our Clients Requirement
Kalpataru Piping Solutions Offer High-Quality Titanium Alloy Gr 2 Round Bars & Titanium Alloy Gr 2 Wires With Test Certificates. We Even Allow Third Party Inspection.
Related Products
FAQ’s About Monel Flanges
What is the maximum service temperature for Monel 400 flanges?
Monel 400 flanges can be used up to approximately 550°C (1022°F) in non-oxidizing conditions, making them suitable for high-temperature chemical processing and steam applications.
Can Monel flanges be used with hydrofluoric acid?
Yes. Monel 400 is the industry-standard material for handling hydrofluoric acid at nearly all concentrations and temperatures in de-aerated conditions, which is why it is widely specified for HF alkylation units in refineries.
What is the difference between ASTM B564 and ASME SB564?
ASTM B564 is issued by ASTM International, while ASME SB564 is the equivalent specification adopted by the ASME Boiler and Pressure Vessel Code. The two are technically identical for Monel forged fittings and flanges; ASME SB564 is typically referenced for boiler and pressure-vessel code compliance.
Do you supply Mill Test Certificates with Monel flanges?
Yes. Every Monel flange from Kalpataru Piping is supplied with an EN10204 Type 3.1 Mill Test Certificate as standard. Type 3.2 third-party witnessed certification and additional QAP or radiography documentation can be arranged on request.
What is the typical lead time for Monel flanges?
Standard sizes in Monel 400 and Monel K500 are typically available ex-stock or within a short lead time; custom sizes, pressure classes, or Type 3.2 certification requirements may extend delivery. Contact our sales team with your specification for an accurate lead-time estimate.
What is the difference between a Monel Slip-On Flange and a Monel Weld Neck Flange?
A slip-on flange slides over the pipe end and is fillet-welded on both sides, making it easier and faster to install at lower pressure ratings. A weld neck flange has a tapered hub that is butt-welded to the pipe, giving superior stress distribution and making it the preferred choice for high-pressure, high-temperature, and cyclic-load services.
