Stainless Steel 304/304L/304H, 316/316L/316Ti, 321/321H, 310/310S, 317/317L, 347/347H, 446, 17-4 PH, 15-5 PH, 410, 420, 430 Plates and Sheets
316 Stainless Steel Plates Suppliers, Stainless Steel 316L Sheets, 316Ti Stainless Steel Plates Manufacturer, Stainless Steel 310 Plates, Stainless Steel 310S Coil Sheet, Stainless Steel 321 Sheet, 321H Stainless Steel Plates Exporter in India.
Stainless Steel 304/304L/304H Plates Manufacturer, Stainless Steel 304/304L/304H Sheets, SS ASTM A240 304 Plates, ASTM A240 Stainless Steel 304L Coils, 304H Stainless Steel Chequered Plates Stockist in India, Stainless Steel UNS S30400 / S30403 / S30409 Sheets Manufacturer.
Stainless Steel 310 Plates Suppliers, Stainless Steel 317/317L Plate, Stainless Steel 347/347H Sheets, Stainless Steel 446 Cold Rolled Plates Manufacurer in India.
Introduction
304/304L/304H Stainless Steel Sheets & Stainless Steel Plates are a piece of the austenitic group of stainless steel and they are a standout amongst the most flexible and generally utilized assortments of stainless plate. They are a moderately minimal effort stainless item and utilized as a part of an assortment of utilizations. 304 evaluations have amazing low-temperature properties and react well to solidifying by chilly working. Stainless Steel 304 evaluations have great welding attributes and post-weld tempering is not typically required to reestablish execution. Stainless Steel 304/304l/304h Plates are typically used for Seawater cooling equipment, Chemical processing for sulphuric, phosphoric, and acetic acids, Gas washing, Condenser tubes, Control and instrumentation, Heat exchangers, and more. Stainless Steel 304 stainless steel is also used in utility scrubber assemblies, acid, and fertilizer production equipment. SS 304 Plates/sheets are also used for Heat Exchanger, Control and instrumentation, Chemical processing for sulphuric, phosphoric, and acetic acids. We offer wide range ss 304 plates/ sheets, ss 304l plates/ sheets, ss 304h plates/ sheets, ss 310 plates/ sheets, ss 310s plates/ sheets, ss 316 plates/ sheets, ss 316l plates/ sheets, ss 317 plates/ sheets, ss 317l plates/ sheets, ss 321 plates/ sheets, ss 321h plates/ sheets, ss 347 plates/ sheets, ss 347h plates/ sheets in India as well as in globe market. These stainless steel 304 plates/ sheets, stainless steel 304h plates/ sheets, stainless steel 304l plates/ sheets are available in various sizes, shapes as per the requirements of our clients. In addition to stainless steel grades, we also supply high-quality ASTM A36 Plates for structural and industrial applications. All our stainless steel plates and sheets are available in various sizes and shapes to meet specific client requirements.
Chemical Composition Of Stainless Steel 304/304L/304H (UNS S30400 / S30403/ S30409) Plates/ Sheets
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni |
| 317 | 0.08 max | 2 max | 1 max | 0.040 max | 0.03 max | 18 – 20 | 3 – 4 | 11 – 14 |
| 317L | 0.035 max | 2 max | 1 max | 0.040 max | 0.03 max | 18 – 20 | 3 – 4 | 11 – 15 |
Mechanical Properties Of Stainless Steel 304 (UNS S30400) Plates/Sheet
| Density | 8.0 g/cm3 |
| Melting Point | 1400 °C (2550 °F) |
| Tensile Strength | Psi – 75000 |
| Yield Strength (0.2%Offset) | Psi – 30000 |
| Elongation | 40 % |
Mechanical Properties Of Stainless Steel 304L (UNS S30403) Plates/ Sheets
| Density | 8.0 g/cm3 |
| Melting Point | 1400 °C (2550 °F) |
| Tensile Strength | Psi – 70000 |
| Yield Strength (0.2%Offset) | Psi – 25000 |
| Elongation | 40 % |
Mechanical Properties Of Stainless Steel 304H (UNS S30409) Plates/Sheets
| Density | 0.285 lb/in3 |
| Melting Point | 2550-2590°F |
| Tensile Strength | 75,000 |
| Yield Strength (0.2%Offset) | 30,000 |
| Elongation | 40 % |
Specification Of Stainless Steel 304/304L/304H Sheets/ Plates
| Size | 1/4″ to 4″ |
| Designation | ASTM A240, ASME SA240 |
| Thickness | 4.0mm – 100mm |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard, etc. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank(Circle), Ring(Flange) |
| Application | Paper and pulp handling equipment, Chemical and petrochemical processing equipment, Condensers in fossil and nuclear-fueled power generation stations, Food processing equipment, Textile equipment. |
Specification Of Stainless Steel 304/304L/304H (UNS S30400 / S30403/ S30409) Sheets & Plates
| Sheet/Plate | Round Bar | Wire | Pipe & Tube | Fittings | Forgings |
| ASTM A240, ASME SA240 | ASTM, ASME, AISI A 276 , SA 276, A 479, SA 479 | ASTM A 164 ASME SA 164 | ASTM A/ASME SA213/A249/A269/A312/A358 | ASTM A403 / ASME SA403 | ASTM A182 / ASME SA182 |
Related Products
FAQ’s About ASTM A106 Grade B Pipes
What is ASTM A106 Grade B pipe?
ASTM A106/A106M Grade B is a seamless carbon steel pipe specification intended for high-temperature service. The exact project suitability depends on the governing piping code, design conditions and purchase specification.
What is the difference between ASTM A106 Grade B and ASTM A53 Grade B?
ASTM A106 Grade B is a seamless high-temperature-service pipe specification. ASTM A53 Grade B covers welded and seamless pipe for mechanical and pressure applications and ordinary steam, water, gas and air service. Select the specification required by the project and design code.
What sizes does Kalpataru supply?
The current brief lists a Kalpataru supply range of 1/2 to 36 in NPS and Schedule 10 to XXS, subject to size and availability. ASTM A106/A106M itself has a wider standard scope.
What is the maximum temperature of ASTM A106 Grade B pipe?
Do not use one universal maximum temperature from the ASTM material specification. Allowable service depends on the design code, pressure, wall thickness, allowable stress and project conditions.
Is ASTM A106 Grade B seamless or welded?
ASTM A106/A106M is a seamless carbon steel pipe specification. Do not describe ERW, LSAW or other welded pipe as ASTM A106 product construction.
What tests are required for ASTM A106 Grade B pipe?
The specification includes mechanical testing and bend/flattening testing as applicable, together with hydrostatic and/or nondestructive electric testing requirements. The exact inspection package should match the current ASTM edition and purchase order.
What documents can be supplied?
Orders can be supplied with EN 10204 3.1 MTC and, where applicable and agreed, IBR documentation, third-party inspection and project-specific test reports.
How is ASTM A106 Grade B pipe priced?
Price depends on NPS, schedule or wall thickness, length, quantity, origin/mill, testing/certification, coating/end preparation and delivery destination. Send the full requirement for a size-wise quotation.
