Stainless Steel 304/ 304l/ 304h/ 316/ 321 Perforated Sheets
Stainless Steel 304 Perforated Sheets Supplier, Manufacturer, Exporter in India.
ASTM A240/ ASME SA240 Stainless Steel UNS S30400 Perforated Sheets Supplier, manufacturer & Exporter.
Stainless Steel 304L Perforated Sheets Supplier, Manufacturer, Exporter in India.
ASTM A240/ ASME SA240 Stainless Steel UNS S30403 Perforated Sheets Supplier, manufacturer & Exporter.
Stainless Steel 304H Perforated Sheets Supplier, Manufacturer, Exporter in India.
ASTM A240/ ASME SA240 Stainless Steel UNS S30409 Perforated Sheets Supplier, manufacturer & Exporter.
Introduction
Kalpataru Piping is a leading Manufacturer, Exporter, Supplier, Stockist, Wholesaler of Stainless Steel 304/ 304l/ 304h// 316/ 321 Perforated Sheets in India. 304/304L/304H Stainless Steel perforated sheets are a piece of the austenitic group of stainless steel and they are a standout amongst the most flexible and generally utilized assortments of stainless plate. They are a moderately minimal effort stainless item and utilized as a part of an assortment of utilizations. These Stainless Steel 304/ 304l/ 304h// 316/ 321 Perforated Sheets has excellent strength and toughness at cryogenic temperatures. We offer wide range ss 304 perforated sheet, ss 304l perforated sheet, ss 304h perforated sheet, ss 310 perforated sheet, ss 310s perforated sheet, ss 316 perforated sheet, ss 316l perforated sheet, ss 317 perforated sheet, ss 317l perforated sheet, ss 321 perforated sheet, ss 321h perforated sheet, ss 347 perforated sheet, ss 347h perforated sheet in India as well as in globe market. These stainless steel 304/304l/304h perforated sheet are available in various sizes, shapes as per the requirements of our clients.
Specification Of Stainless Steel 304/304L/304H (UNS S30400 / S30403/ S30409) Perforated Sheet:
Size |
1/4″ to 4″ |
Designation |
ASTM A240, ASME SA240 |
Thickness |
4.0mm – 100mm |
Hardness |
Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Form |
Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank(Circle), Ring(Flange) |
Mechanical Properties Of Stainless Steel 304 (UNS S30400) Perforated Sheet:
Density |
8.0 g/cm3 |
Melting Point |
1400 °C (2550 °F) |
Tensile Strength |
Psi – 75000 |
Yield Strength (0.2%Offset) |
Psi – 30000 |
Elongation |
40 % |
Mechanical Properties Of Stainless Steel 304L (UNS S30403) Perforated Sheet:
Density |
8.0 g/cm3 |
Melting Point |
1400 °C (2550 °F) |
Tensile Strength |
Psi – 70000 |
Yield Strength (0.2%Offset) |
Psi – 25000 |
Elongation |
40 % |
Related Sections
FAQ’s About Monel Flanges
What is the maximum service temperature for Monel 400 flanges?
Monel 400 flanges can be used up to approximately 550°C (1022°F) in non-oxidizing conditions, making them suitable for high-temperature chemical processing and steam applications.
Can Monel flanges be used with hydrofluoric acid?
Yes. Monel 400 is the industry-standard material for handling hydrofluoric acid at nearly all concentrations and temperatures in de-aerated conditions, which is why it is widely specified for HF alkylation units in refineries.
What is the difference between ASTM B564 and ASME SB564?
ASTM B564 is issued by ASTM International, while ASME SB564 is the equivalent specification adopted by the ASME Boiler and Pressure Vessel Code. The two are technically identical for Monel forged fittings and flanges; ASME SB564 is typically referenced for boiler and pressure-vessel code compliance.
Do you supply Mill Test Certificates with Monel flanges?
Yes. Every Monel flange from Kalpataru Piping is supplied with an EN10204 Type 3.1 Mill Test Certificate as standard. Type 3.2 third-party witnessed certification and additional QAP or radiography documentation can be arranged on request.
What is the typical lead time for Monel flanges?
Standard sizes in Monel 400 and Monel K500 are typically available ex-stock or within a short lead time; custom sizes, pressure classes, or Type 3.2 certification requirements may extend delivery. Contact our sales team with your specification for an accurate lead-time estimate.
What is the difference between a Monel Slip-On Flange and a Monel Weld Neck Flange?
A slip-on flange slides over the pipe end and is fillet-welded on both sides, making it easier and faster to install at lower pressure ratings. A weld neck flange has a tapered hub that is butt-welded to the pipe, giving superior stress distribution and making it the preferred choice for high-pressure, high-temperature, and cyclic-load services.
