Inconel 718 Long Radius Bend
Inconel 718 Long Radius Bends Manufacturer
UNS N07718 Long Radius Bends / Pipe Bends Manufacturer, Supplier, Exporter In India
Introduction
Kalpataru Piping is a leading Manufacturer, Exporter, Supplier and Stockist of Inconel 718 Long Radius Bends in India. Inconel 718 Long Radius Bend with low carbon content. That’s why, this renders exceptional formability and weldability, annealed and fabricated to enhance better performance, high strength against rupture making them suitable for irrigation and agriculture covering heavy fluid flow and thus, this, in turn, required strength and reinforcement. short radius bend and long radius bend – to which both of them are having a midpoint-to- midpoint length, along with double the indistinguishable 90 degree elbow. The most important application for these pipe fittings is in heater coils and heat exchangers. This inconel uns n07718 long Radius Bend allow purport insertion of pipes due to its long bodies and Keene so room for leakage and also help in maximizing drainage of waste. Also, it’s provides cleaning and hygiene for food-related processing. Our Inconel 718 Long Radius Bend and Inconel 718 Long Radius Bend have high demand over the international market. Inconel 718 Pipe Bends such as inconel 718 Long Radius Bend, inconel 718 Piggable Bend, inconel 718 Hot Induction Bend, inconel 718 Seamless Pipe Bend, inconel 718 Welded Pipe Bend, inconel 718 U Pipe Bend, inconel 718 J Pipe Bend, inconel 718 Mitered Pipe Bend, inconel 718 3D Pipe Bend etc. These inconel 718 long radius bends are available in various sizes, shapes as per the requirements of our clients.
Specification Of Inconel 718 Pipe Bend
Specifications : ASTM B366 & ASME SB366
Dimensions : ASME/ANSI B16.9 B16.28 and MSS SP-43 SP-75
Size : Seamless Pipe Bends (1/2″ – 24″), ERW Welded Fabricated Pipe Bends (2″ – 36″)
Outer Diameter : 38.0 mm – 206.0 mm
Wall Thickness : 1.5 mm 2.0 mm 3.0 mm – greater wall thickness at request
Bend Radii : 75 100 150 250 300 500 800 1,000 1,200 1,500 mm
Bending Radius(R): R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Bending angle (θ): 15°, 30°, 45°, 60°, 90°, 135°, 180°
Grades : Inconel 718 (UNS N07718)
ASME SB366 Inconel 718 Long Radius Bends Equivalent Grades
|
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
AFNOR |
EN |
|
Inconel 728 |
2.4668 |
N07718 |
– |
– |
– |
– |
– |
Chemical Composition of Grade Inconel 718 Long Radius Bends
|
Grade |
C |
Mn |
Si |
S |
Cu |
Fe |
Ni |
Cr |
|
Inconel 718 |
0.08 max |
0.35 max |
0.35 max |
0.015 max |
0.30 max |
– |
50.00 – 55.00 |
17.00 – 21.00 |
Mechanical Properties of Inconel 718 Long Radius Bends
|
Element |
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
|
Inconel 718 |
8.2 g/cm3 |
1350 °C (2460 °F) |
Psi – 1,35,000 , MPa – 930 |
Psi – 75,000 , MPa – 482 |
45 % |
Inconel 718 Long Radius Bends Available Types
|
Inconel 718 Pipe Bend |
Inconel 718 Buttweld Bend |
|
Inconel 718 Mandrel Bends |
Inconel 718 Long Radius Bend |
|
Inconel UNS N07718 Piggable Bend |
Alloy 718 Hot Induction Bend |
|
Inconel UNS N07718 Seamless Pipe Bend |
ANSI 718 Welded Pipe Bend |
|
718 Inconel U Pipe Bend |
Alloy 718 J Pipe Bend |
|
Inconel 718 Mitered Pipe Bend |
Inconel UNS N07718 3D Pipe Bend |
|
Inconel UNS N07718 5D Pipe Bend |
Alloy 718 10D Pipe Bend |
|
Inconel 2.5D Pipe Bend |
Inconel 22D Pipe Bend |
|
Inconel 718 Customized Pipe Bend |
Inconel Bend |
|
ANSI B16.9 Inconel Alloy 718 12D Pipe Bending |
Inconel 718 High Pressure Bending |
|
ASTM B366 Inconel 718 180 Degree Pipe Bend |
ASME SB366 Inconel Pipe Bend |
|
Inconel 718 EN Pipe Bend |
718 Alloy ASME Pipe Bend |
|
Inconel Small Size Pipe Bending |
ASME SB366M Inconel 718 Pipe Bend Elbow |
|
Inconel 718 90 Degree Pipe Bend |
Inconel 160 Deg Pipe Bend |
Related Products
- Inconel 600 Pipes & Tubes
- Inconel 600 Flanges
- Inconel 600 Round Bars & Wires
- Inconel 600 Plates & Sheets
- Inconel 600 Buttweld Fittings
- Inconel 625 Pipes & Tubes
- Inconel 625 Flanges
- Inconel 625 Round Bars & Wires
- Inconel 625 Plates & Sheets
- Inconel 625 Buttweld Fittings
- Inconel 600 Shims
- Inconel 625 Shims
FAQ’s About ASTM A106 Grade B Pipes
What is ASTM A106 Grade B pipe?
ASTM A106/A106M Grade B is a seamless carbon steel pipe specification intended for high-temperature service. The exact project suitability depends on the governing piping code, design conditions and purchase specification.
What is the difference between ASTM A106 Grade B and ASTM A53 Grade B?
ASTM A106 Grade B is a seamless high-temperature-service pipe specification. ASTM A53 Grade B covers welded and seamless pipe for mechanical and pressure applications and ordinary steam, water, gas and air service. Select the specification required by the project and design code.
What sizes does Kalpataru supply?
The current brief lists a Kalpataru supply range of 1/2 to 36 in NPS and Schedule 10 to XXS, subject to size and availability. ASTM A106/A106M itself has a wider standard scope.
What is the maximum temperature of ASTM A106 Grade B pipe?
Do not use one universal maximum temperature from the ASTM material specification. Allowable service depends on the design code, pressure, wall thickness, allowable stress and project conditions.
Is ASTM A106 Grade B seamless or welded?
ASTM A106/A106M is a seamless carbon steel pipe specification. Do not describe ERW, LSAW or other welded pipe as ASTM A106 product construction.
What tests are required for ASTM A106 Grade B pipe?
The specification includes mechanical testing and bend/flattening testing as applicable, together with hydrostatic and/or nondestructive electric testing requirements. The exact inspection package should match the current ASTM edition and purchase order.
What documents can be supplied?
Orders can be supplied with EN 10204 3.1 MTC and, where applicable and agreed, IBR documentation, third-party inspection and project-specific test reports.
How is ASTM A106 Grade B pipe priced?
Price depends on NPS, schedule or wall thickness, length, quantity, origin/mill, testing/certification, coating/end preparation and delivery destination. Send the full requirement for a size-wise quotation.
