Nickel 200/201 Filler Wire
Introduction
Kalpataru Piping is a leading Manufacturer, Exporter, Supplier and Stockist of Nickel alloy 200/201 filler wire in India. Nickel 200 filler Wire are used where the properties of steel and corrosion resistance are required.. Heat treatment (solution annealing) of Stainless steel Wire has to be done if the technical standard specify about the same. Normally Nickel 200/201 filler Wire are being heat treated with water quenching process. These Wire have to be heated up to 1080 degree Celsius temperature and thereafter it has to drop the temperature by water quenching process. These process is being conducted on stainless Bright Wire on as rolled condition. . These SS 304 Series Fillers Wires are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425 Degree C – 850 Degree C. nickel 201 Welding Wires has the higher carbon content, which makes it ideal for applications requiring good mechanical properties at elevated temperatures. Nickel alloy 200 filler wires, Nickel alloy 201 filler wires exhibit excellent resistance to a wide range of atmospheric, chemical, textile, petroleum industry, and food industry exposures. We also offer 304L Stainless Steel Filler Wires who doesn’t require post-weld annealing, and is widely used in heavy-gauge components where its immunity to carbide precipitation is needed. We offer wide range of Nickel filler wires such as nickel 200 Filler wire, nickel 201 filler wire. These nickel alloy 200 filler wire, nickel alloy 201 filler wire are available in various sizes, shapes as per the requirements of our clients.
.
Nickel 200 / 201 Wire Specification
Form : Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. Length : 100 mm To 3000 mm Long & Above Finish : Bright, Polish & Black Grade : Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201),Nickel 205 (UNS N02205)Grade Specification
| Standard | Nickel 200 | Nickel 201 |
| UNS | N02200 | N02201 |
| WERKSTOFF NR. | 2.4066 | 2.4068 |
| AFNOR | N-100M | – |
| JIS | NW 2200 | NW 2201 |
| GOST | H-2 | H-2 |
| BS | NA 11 | NA 12 |
| EN | Ni 99.2 | LC-Ni 99 |
Mechanical & Physical Properties
| Density | 8.9 g/cm3 |
| Melting Point | 1446 °C (2635 °F) |
| Tensile Strength | Psi – 67000 , MPa – 462 |
| Yield Strength (0.2%Offset) | Psi – 21500 , MPa – 148 |
| Elongation | 45 % |
Chemical Composition
| Nickel 200 | Nickel 201 | |
| Ni | 99.0 min | 99.0 min |
| Fe | 0.4 max | 0.4 max |
| C | 0.15 max | 0.02 max |
| Mn | 0.35 max | 0.35 max |
| Si | 0.1 max | 0.2 max |
| Cu | 0.25 max | 0.25 max |
| Mg | 0.15 max | |
| Ti | 0.1 max | |
| S | 0.01 max | 0.01 max |
Related Products
Inconel 625 Forged Fittings Exporter | Countries and Cities We Supply To
Kalpataru Piping Solutions exports Inconel 625 forged fittings and nickel alloy 625 forgings to over 40 countries worldwide. Our major export destinations include: United States (Houston, Los Angeles, New York), United Kingdom (London, Aberdeen), UAE (Dubai, Abu Dhabi, Sharjah), Saudi Arabia (Dammam, Riyadh, Jubail), Canada (Calgary, Edmonton), Australia (Perth, Brisbane), Germany (Hamburg, Dusseldorf), Netherlands (Rotterdam, Amsterdam), Singapore, Malaysia (Kuala Lumpur), South Korea (Busan, Seoul), Brazil (Rio de Janeiro, Sao Paulo), South Africa (Johannesburg, Durban), Italy (Genoa, Milan), France (Paris, Marseille), Norway (Stavanger, Bergen), and all GCC and Southeast Asian markets.
FAQs - ASTM A53 Grade B Pipe
What is Nickel 200 seamless pipe used for?
Nickel 200 seamless pipe is used wherever maximum corrosion resistance and purity are needed, including oil & gas drilling, chemical processing, food-grade equipment, and marine piping systems.
What is the difference between Nickel 200 and Nickel 201 pipe?
Nickel 200 has a higher carbon content suited to general service below 315°C, while Nickel 201 has low carbon content designed for high-temperature applications above 315°C, avoiding embrittlement issues.
What size range do you supply for Nickel 200 seamless pipes and tubes?
Kalpataru Piping supplies Nickel 200 pipes and tubes in sizes from 4 mm to 219 mm, with wall thickness from 0.5 mm to 20 mm, and lengths up to 13,500 mm, fully customisable to your project.
Do you provide mill test certificates with every order?
Yes, every consignment of Nickel 200 seamless pipe is supplied with EN 10204 3.1 or 3.2 mill test certificates, and third-party inspection can be arranged on request.
Is Nickel 200 pipe suitable for high-temperature applications?
Nickel 200 performs well up to around 315°C (600°F). For higher-temperature service, we recommend Nickel 201, which has a low-carbon composition designed to resist embrittlement at elevated temperatures.
Can Kalpataru Piping supply custom Nickel 200 pipe sizes and forms?
Yes, we manufacture custom sizes, thicknesses, and forms including round, square, rectangular, and hydraulic tube, tailored precisely to your project drawing or specification.
Do you export Nickel 200 seamless pipes and tubes internationally?
Yes, Kalpataru Piping exports Nickel 200 seamless pipes and tubes to over 40 countries worldwide, with complete documentation, secure packing, and reliable shipping support.
