Titanium Alloy Gr 2 Plates & Titanium Alloy Gr 2 Sheets
Titanium werkstoff nr. 3.7035 Plates, Sheets & Coils Manufacturer, Exporter & Suppliers in India.
ASTM B 265 GR -2 UNS R50400 Titanium Shim Sheet, Chequered Plate Suppliers.
Introduction
Kalpataru Piping Solutions are one of the leading Manufacturers, Exporters and Supplier of high quality Titanium Alloy Gr 2 Plates & Titanium Alloy Gr 2 Sheets & Coils in mumbai, India. We are manufactured these Titanium grade 2 Plates, Sheets as per the national & international quality standards. We also offer the complete range of grades like Titanium GR I, GR -2, GR-3, GR-4, GR-5, GR-7 Plates, Sheets & Coils as per the clients requirements. These Titanium gr2 Sheets & Plates are available different dimensions, specification & thickness as per the clients requirements. Titanium Grade 2 Plates as well has some other excellent features to offer such as hard-wearing, light weight, soaring tensile potency and so on. Superior quality steel. Titanium Gr 2 Plates can be cold rolled to various tempers. Post-work annealing here is required to re-attain optimum performance characteristics. These are widely used in manufacturing many industrial components, machineries and spares.
Titanium Alloy Gr 2 Plate & Titanium Alloy Gr 2 Sheet Coil Specifications:
| Specifications | : | ASTM / ASME SB265 |
| Size | : | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | : | 0.1mm to 12 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Titanium Alloy Gr 2 Plate & Titanium Alloy Gr 2 Sheet Chemical Composition:
| Grade | Ti | C | Fe | H | N | O | Al | V |
| Ti Grade2 | 99.2 min | 0.1 max | 0.3 max | 0.015 max | 0.03 max | 0.25 max | – | – |
Titanium Alloy Gr 2 Plates & Titanium Alloy Gr 2 Sheets Mechanical Properties:
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Titanium Gr. 2 | 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20 % |
Equivalent Grades for Gr 2 Titanium Sheets & Plates:
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr. 2 | 3.7035 | R50400 |
Related Products
FAQ’s About Monel Flanges
What is the maximum service temperature for Monel 400 flanges?
Monel 400 flanges can be used up to approximately 550°C (1022°F) in non-oxidizing conditions, making them suitable for high-temperature chemical processing and steam applications.
Can Monel flanges be used with hydrofluoric acid?
Yes. Monel 400 is the industry-standard material for handling hydrofluoric acid at nearly all concentrations and temperatures in de-aerated conditions, which is why it is widely specified for HF alkylation units in refineries.
What is the difference between ASTM B564 and ASME SB564?
ASTM B564 is issued by ASTM International, while ASME SB564 is the equivalent specification adopted by the ASME Boiler and Pressure Vessel Code. The two are technically identical for Monel forged fittings and flanges; ASME SB564 is typically referenced for boiler and pressure-vessel code compliance.
Do you supply Mill Test Certificates with Monel flanges?
Yes. Every Monel flange from Kalpataru Piping is supplied with an EN10204 Type 3.1 Mill Test Certificate as standard. Type 3.2 third-party witnessed certification and additional QAP or radiography documentation can be arranged on request.
What is the typical lead time for Monel flanges?
Standard sizes in Monel 400 and Monel K500 are typically available ex-stock or within a short lead time; custom sizes, pressure classes, or Type 3.2 certification requirements may extend delivery. Contact our sales team with your specification for an accurate lead-time estimate.
What is the difference between a Monel Slip-On Flange and a Monel Weld Neck Flange?
A slip-on flange slides over the pipe end and is fillet-welded on both sides, making it easier and faster to install at lower pressure ratings. A weld neck flange has a tapered hub that is butt-welded to the pipe, giving superior stress distribution and making it the preferred choice for high-pressure, high-temperature, and cyclic-load services.
