Titanium Alloy Gr 2 Perforated Sheet
Introduction
kalpataru Piping is one of the leading Manufacturer, Supplier and Exporter of Titanium Alloy Gr 2 Perforated Sheets in india. Titanium Alloy Gr 2 Perforated Sheets is a solid solution nickel chromium heat resisting alloy which gives outstanding performance at temperatures up to about 1200 Degree Celsius. nickel UNS N06200/201 perforated perforated sheets also has good aqueous corrosion resistance due to the high nickel content in combination with chromium. Titanium Grade 2 perforated sheets have high strength and toughness and thus are retained during extended service at high temperature. Titanium Gr. 2 perforated sheet has outstanding resistance to high temperature oxidation. It resists oxidation and spalling at temperatures as high as 1260°C. The protective oxide coating resists scaling even under severe conditions, and the Titanium Grade 2 bolt also has good resistance to carburisation and nitridation. Its resistance to sulphur is poor and it should not be used in atmospheres containing sulphur, particularly reducing sulphur. Titanium Gr. 2 Bolt is qualified for use in pressure vessels . It is not pre qualified in AS1210. The Titanium Grade 2 perforated perforated sheet is available in the various forms including Titanium Grade 2 eye bolt, Titanium Grade 2 wing bolts, Titanium Grade 2 U bolts, Titanium Grade 2 flat head screws, Titanium Grade 2 machine screws, Titanium Grade 2 hex cap screws, Titanium Grade 2 socket head cap screws, Titanium Grade 2 hex nuts & Titanium Grade 2 lock nuts etc. Titanium Grade 2 studs and nuts has good high temperature strength and retains its ductility after long service exposure, with good corrosion resistance under oxidizing conditions. High tensile strength make Titanium Grade 2 perforated perforated sheets perfect for marine use. The most common type of Titanium Grade 2 perforated perforated sheet, a Titanium Grade 2 hex head bolt is designed to be tightened with a standard spanner or ratchet and socket. Our Titanium Grade 2 metric nuts are designed to be used in conjunction with the equivalent sized metric Titanium Grade 2 bolts, Titanium Grade 2 screws and Titanium Grade 2 washers. Hitesh Steel is a leading distributor of Titanium Grade 2 aircraft fastening hardware for commercial and military aerospace applications. We offer a wide variety of high-quality aircraft hardware and parts in Titanium Grade 2, that feature everything from Titanium Gr. 2 bolts to rivets to every small piece in-between. We widely offer high quality grade 2 screws, Titanium Grade 2 Full thread stud, Titanium Grade 2 exhaust bolts, Titanium Grade 2 turbo bolts, Titanium Grade 2 Aerospace Bolts, Titanium Grade 2 Stud Bolts, gr. 2 Round Head Bolts, Titanium Grade 2 Hex Cap Screw, Titanium Grade 2 flat head cap screw, Titanium Grade 2 socket head cap screw, Titanium Grade 2 Spring Washer, Titanium Grade 2 Flat Washer, Titanium Grade 2 Nuts, Titanium Grade 2 Heavy Hex Nuts, rivets, anchors, inserts, studs, threaded bars and hose clamps in India. Kalpataru Piping is offer Titanium Grade 2 perforated perforated sheets in any size, shapes, dimension etc as per customer requirement.
Titanium Alloy Gr 2 Perforated Sheet Specifications
| Specifications | : | ASTM / ASME SB265 |
| Size | : | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | : | 0.1mm to 12 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Titanium Alloy Gr 2 Sheet Chemical Composition
| Grade | Ti | C | Fe | H | N | O | Al | V |
| Ti Grade2 | 99.2 min | 0.1 max | 0.3 max | 0.015 max | 0.03 max | 0.25 max | – | – |
Titanium Alloy Gr 2 Sheets Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Titanium Gr. 2 | 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20 % |
Equivalent Grades for Gr 2 Titanium Perforated Sheets
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr. 2 | 3.7035 | R50400 |
Related Products
FAQ’s About ASTM A106 Grade B Pipes
What is ASTM A106 Grade B pipe?
ASTM A106/A106M Grade B is a seamless carbon steel pipe specification intended for high-temperature service. The exact project suitability depends on the governing piping code, design conditions and purchase specification.
What is the difference between ASTM A106 Grade B and ASTM A53 Grade B?
ASTM A106 Grade B is a seamless high-temperature-service pipe specification. ASTM A53 Grade B covers welded and seamless pipe for mechanical and pressure applications and ordinary steam, water, gas and air service. Select the specification required by the project and design code.
What sizes does Kalpataru supply?
The current brief lists a Kalpataru supply range of 1/2 to 36 in NPS and Schedule 10 to XXS, subject to size and availability. ASTM A106/A106M itself has a wider standard scope.
What is the maximum temperature of ASTM A106 Grade B pipe?
Do not use one universal maximum temperature from the ASTM material specification. Allowable service depends on the design code, pressure, wall thickness, allowable stress and project conditions.
Is ASTM A106 Grade B seamless or welded?
ASTM A106/A106M is a seamless carbon steel pipe specification. Do not describe ERW, LSAW or other welded pipe as ASTM A106 product construction.
What tests are required for ASTM A106 Grade B pipe?
The specification includes mechanical testing and bend/flattening testing as applicable, together with hydrostatic and/or nondestructive electric testing requirements. The exact inspection package should match the current ASTM edition and purchase order.
What documents can be supplied?
Orders can be supplied with EN 10204 3.1 MTC and, where applicable and agreed, IBR documentation, third-party inspection and project-specific test reports.
How is ASTM A106 Grade B pipe priced?
Price depends on NPS, schedule or wall thickness, length, quantity, origin/mill, testing/certification, coating/end preparation and delivery destination. Send the full requirement for a size-wise quotation.
