Alloy 20 Compression Tube Fittings
ASTM / ASME B366 Alloy 20 Foundation Port Connector, Alloy 20 Instrumentation Connector Elbow, Alloy 20 Hex Plug Leading Manufacturers.
UNS N08020 Female Connector, Alloy 20 Pipe End Closure, Alloy 20 Male Run Tee, Alloy 20 Ferrule Set Suppliers.
Carpenter 20 Male Elbow NPT, 20Cb-3® Ferrule Fitting Male Run Tee Supplier, Incoloy® alloy 20 Male Connector NPT MCN, Alloy 20 Tube Fittings, Alloy 20 Male Fittings Distributor in India.
Introduction
Kalpataru piping solutions is leading manufacturer, supplier, exporters and stoickest for high quality Alloy 20 compression tube fittings. Kalpataru piping solutions offer a complete range of Alloy 20 compression tube fittings such as Seamless, Welded. Alloy 20 compression tube fittings has bright annealed or bright annealed and cold rolled grease, where ultra – bright finishes is used for decorative applications. Kalpataru piping solutions export, Supply & Manufacturer Alloy 20 forms like seamless pipe, welded pipe, seamless tube, welded tube, Fasteners, bar, wire, sheet, plate, forgings, pipe fittings and flanges. Alloy 20 compression tube fittings, also acknowledged as Carpenter 20, is a nickel-iron-chromium austenitic alloy that was formed for most resistance to acid attack, in particular sulfuric acid. This superalloy pipes has some good resistance to general corrosion, crevice corrosion and pitting in chemicals that contains phosphoric, chlorides, sulfuric, and nitric acids. It as well contains niobium for stabilization in opposition to sensitization and consequential intergranular corrosion. With respect to international quality of raw materials, we also offer these AS Alloy 20 in customized sizes and thicknesses as per specific demands by our esteemed clients at market leading prices..
Alloy UNS N08020 compression tube fittings Equivalent Grades
|
STANDARD |
WERKSTOFF NR. |
UNS |
AFNOR |
EN |
|
Alloy 20 |
2.4660 |
N08020 |
Z2NCUD31-20AZ |
NiCr20CuMo |
ALLOY 20 compression tube fittings SPECIFICATION :
Dimensions : DIN, ASTM, ASME, BS and all International Standards
Specifications : ASTM B366 / ASME SB 366
Grade : Alloy 20 – UNS N08020 )
Size Range : 1/8” to 2” and 2mm to 32mm tube diameter
Working Pressure : up to 6,000psi (based on severity of application)
Available Thread : NPT(ANSI B1.20.1), and ISO thread configurations (BSPT, BSPP)
Alloy 20 compression tube fittings Chemical Composition
|
Element |
Alloy 20 |
|
Ni |
32 – 38 |
|
Fe |
Bal |
|
C |
0.02 max |
|
Mn |
1 – 2 |
|
Si |
0.7 max |
|
Cu |
3 – 4 |
|
Cr |
19 – 21 |
|
Mo |
2 – 3 |
|
S |
0.005 max |
|
P |
0.02 max |
|
Nb |
0.1 – 0.3 |
Alloy 20 compression tube fittings Physical & Mechanical Properties
|
Element |
Alloy 20 |
|
Density |
8.1 g/cm3 |
|
Melting Point |
1443 °C (2430 °F) |
|
Tensile Strength |
Psi -80,000, MPa -551 |
|
Yield Strength (0.2%Offset) |
Psi – 35,000, MPa – 241 |
|
Elongation |
30 % |
Other Types of Alloy 20 compression tube fittings
- Alloy 20 Instrumentation Tubes Fittings
- Alloy 20 Instrumentation Female Connector
- Alloy 20 Bulkhead Union Supplier
- ASTM B366 Alloy 20 Female Branch Tee
- Alloy 20 Ferrule Set Exporter
- DIN 2.4660 Alloy 20 Female Adapter
- Alloy 20 Instrumentation Female Elbow
- Alloy 20 Instrumentation Hex Plug Stockist
- ASME SB 366 Alloy 20 Male Run Tee
- Alloy 20 Reducing Union Supplier in India
- ANSI B1.20.1 Alloy 20 Ferrules Distributors
- Alloy UNS N08020 Union Cross
- Alloy 20 Union Tee Dealer
- Alloy 20 Straight Unions Stocks
- Alloy 20 Alloy Male Branch Tee Stockiest
- Alloy 20 Male Elbow Stockholder
- Alloy 20 Male Connector Supplier
- Allou 20 Port Connector Distributors
- Alloy 20 Instrumentation Tube Cap
- Alloy 20 Alloy Nut and Ferrule Exporter
- Alloy 20 Pipe End Closure Manufacturer
- Alloy 20 Bulkhead Tube Union Exporter
Marking & Packing Of Alloy 20 compression tube fittings
Kalpataru Piping Solutions Pack Alloy 20 compression tube fittings Properly And Carefully To Ensure That There Is No Damage To The Alloy 20 compression tube fittings During The Transit. We Pack Alloy 20 compression tube fittings In Wooden Boxes And Supply It All Over The World.
High-Quality Alloy 20 compression tube fittings – Quality Assurance!
Kalpataru Piping Solutions Is One Of The Most Trusted Exporter, Supplier, Stockist & Manufacturer Of Alloy 20 compression tube fittings. Kalpataru Piping Solutions Offers High-Quality Alloy 20 compression tube fittings. We Inspect Our Alloy 20 compression tube fittings At Each Stage Of Production Process To Make Sure That The Quality Of The Alloy 20 compression tube fittings Is Not Compromised. They Are Examined To Confirm Their Standards And We Also Offer Third Party Inspection Of Our Alloy 20 compression tube fittings On Demand Of Our Clients. Kalpataru piping solutions even Offer Test Certificates For Our Alloy 20 compression tube fittings.
We Pack Alloy 20 compression tube fittings Properly And Carefully To Ensure That There Is No Damage To Alloy 20 compression tube fittings During The Transit. We Pack Alloy 20 compression tube fittings In Wooden Boxes And Supply It All Over The World.
Why Choose Kalpataru Piping Solutions For Buying Alloy 20 compression tube fittings?
- Huge Stock Of Alloy 20 compression tube fittings.
- Large Production Capacity Of Alloy 20 compression tube fittings
- Kalpataru Piping Solutions Offer Highest Quality Alloy 20 compression tube fittings At Lowest Price
- We Offer Customised Sizes For Alloy 20 compression tube fittings Depending On Our Clients Requirement
- Kalpataru Piping Solutions Offer High-Quality Alloy 20 compression tube fittings With Test Certificates. We Even Allow Third Party Inspection.
FAQ’s About Monel Flanges
What is the maximum service temperature for Monel 400 flanges?
Monel 400 flanges can be used up to approximately 550°C (1022°F) in non-oxidizing conditions, making them suitable for high-temperature chemical processing and steam applications.
Can Monel flanges be used with hydrofluoric acid?
Yes. Monel 400 is the industry-standard material for handling hydrofluoric acid at nearly all concentrations and temperatures in de-aerated conditions, which is why it is widely specified for HF alkylation units in refineries.
What is the difference between ASTM B564 and ASME SB564?
ASTM B564 is issued by ASTM International, while ASME SB564 is the equivalent specification adopted by the ASME Boiler and Pressure Vessel Code. The two are technically identical for Monel forged fittings and flanges; ASME SB564 is typically referenced for boiler and pressure-vessel code compliance.
Do you supply Mill Test Certificates with Monel flanges?
Yes. Every Monel flange from Kalpataru Piping is supplied with an EN10204 Type 3.1 Mill Test Certificate as standard. Type 3.2 third-party witnessed certification and additional QAP or radiography documentation can be arranged on request.
What is the typical lead time for Monel flanges?
Standard sizes in Monel 400 and Monel K500 are typically available ex-stock or within a short lead time; custom sizes, pressure classes, or Type 3.2 certification requirements may extend delivery. Contact our sales team with your specification for an accurate lead-time estimate.
What is the difference between a Monel Slip-On Flange and a Monel Weld Neck Flange?
A slip-on flange slides over the pipe end and is fillet-welded on both sides, making it easier and faster to install at lower pressure ratings. A weld neck flange has a tapered hub that is butt-welded to the pipe, giving superior stress distribution and making it the preferred choice for high-pressure, high-temperature, and cyclic-load services.
