Incoloy 800/ 800H/ 800HT Flanges
ASTM B564 Incoloy 800 Blind Flanges, Incoloy DIN 2.4858 Slip on Flanges, Incoloy 825 SWRF Flanges Suppliers in India.
(UNS N08800) Incoloy 800HT Weld Neck Flanges, 800H Inconel RTJ Flanges Supplier, Manufacturers, Exporter in India
Introduction
Kalpataru piping is one of the leading manufacturer, suppliers, exporter of Incoloy 800/800h/800ht Flanges using high quality of raw material. Incoloy 800/800h/800ht Flanges Spectacle Blind Flanges highly resistant to both chloride stress – corrosion cracking and to embrittlement from precipitation of sigma phase. Incoloy 800/800h/800ht Long Weld Neck Flanges is also used in Chemical & Petrochemical processing. Incoloy alloys 800H shims 800HT shoms have superior creep and stress rupture properties. Incoloy 800/800h/800ht Flanges are used in a variety of applications involving exposure to corrosive environments and high temperatures such as heat treating equipment, chemical and petrochemical processing, nuclear power plants and the paper pulp industry. Heat-treating equipment such as baskets, trays. Kalpataru Piping is widely offer Incoloy 800/800h/800ht Flanges in India as well all over the world. We also offer these Products are available in different size,grades, specification & thickness as per the clients requirements.
Specification For Incoloy ASTM B564 800/800h/800ht Flanges
Specifications : ASTM B564 / ASME SB564
Dimensions : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size : 1/2″NB TO 60″NB
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type : Flat Face , Raised Face, Ring Type Joint
Grades : Incoloy 800, 800H, 800HT Flanges
ASME SB564 Incoloy 800/800h/800ht Flanges Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
Chemical Composition of Grade Incoloy 800/800h/800ht Flanges:
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60ᴬ | 0.15 – 0.60ᴬ |
Mechanical Properties of ASTM B564 Incoloy 800/800h/800ht Flanges
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 800 / 800H / 800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
Related Products
- Incoloy 800/800H/800T Instrumentation Valves
- Incoloy 800/800H/800T Filler Wire
- Incoloy 800/800H/800T Long Radius Bends
- Incoloy 800/800H/800T Pipes Spools
- Incoloy 800/800H/800T Wiremesh
- Incoloy 825 Instrumentation Valves
- Incoloy 825 Filler Wire
- Incoloy 825 Long Radius Bends
- Incoloy 825 Pipes Spools
- Incoloy 825 Wiremesh
FAQ’s About ASTM A106 Grade B Pipes
What is ASTM A106 Grade B pipe?
ASTM A106/A106M Grade B is a seamless carbon steel pipe specification intended for high-temperature service. The exact project suitability depends on the governing piping code, design conditions and purchase specification.
What is the difference between ASTM A106 Grade B and ASTM A53 Grade B?
ASTM A106 Grade B is a seamless high-temperature-service pipe specification. ASTM A53 Grade B covers welded and seamless pipe for mechanical and pressure applications and ordinary steam, water, gas and air service. Select the specification required by the project and design code.
What sizes does Kalpataru supply?
The current brief lists a Kalpataru supply range of 1/2 to 36 in NPS and Schedule 10 to XXS, subject to size and availability. ASTM A106/A106M itself has a wider standard scope.
What is the maximum temperature of ASTM A106 Grade B pipe?
Do not use one universal maximum temperature from the ASTM material specification. Allowable service depends on the design code, pressure, wall thickness, allowable stress and project conditions.
Is ASTM A106 Grade B seamless or welded?
ASTM A106/A106M is a seamless carbon steel pipe specification. Do not describe ERW, LSAW or other welded pipe as ASTM A106 product construction.
What tests are required for ASTM A106 Grade B pipe?
The specification includes mechanical testing and bend/flattening testing as applicable, together with hydrostatic and/or nondestructive electric testing requirements. The exact inspection package should match the current ASTM edition and purchase order.
What documents can be supplied?
Orders can be supplied with EN 10204 3.1 MTC and, where applicable and agreed, IBR documentation, third-party inspection and project-specific test reports.
How is ASTM A106 Grade B pipe priced?
Price depends on NPS, schedule or wall thickness, length, quantity, origin/mill, testing/certification, coating/end preparation and delivery destination. Send the full requirement for a size-wise quotation.
