Stainless Steel 904L Long Radius Bends
Stainless Steel 904L Long Radius Bends, 904L SS Long Radius Bends Supplier, Manufacturer, Exporter in India.
ASTM A403 904L Stainless Steel Long Radius Bend, Stainless Steel 904L Piggable Bends Suppliers.
Werkstoff No 1.4539 Stainless Steel High Pressure Bending, Stainless Steel DIN 1.4539 U Pipe Bend Supplier, manufacturer in Mumbai, India.
Introduction
Kalpataru Piping is a leading Manufacturer, Exporter, Supplier and Stockist of Stainless Steel 904L Long Radius Bends in India. We offer high strength, dimensional correctness, high tension power, corrosion resistant and consistency products like UNS N08904 SS 3D Long Radius Bends, WNR 1.4539 SS Hot Induction Bends & Stainless Steel ASTM A403 904L Pipe Bends. ANSI 904L Long Radius Bends using for high grade of raw material by using most ultra modern technology. 904L SS Piggable Bends are appropriate to use in drainage systems, their elongated bodies allowing proper discharge of wastes. WNR 1.4539 SS Long Radius Pipe Bends are also known as ‘high alloyed pipe bends’ as they contain small amounts of Molybdenum and Nickel, metals that render good corrosion resistance abilities. We offer wide range of ASTM A403 Stainless Steel 904L Long Radius in India. These stainless steel 904l long radius bends are available in various sizes, shapes as per the requirements of our clients.
Standard Specification of ASTM B366 Stainless Steel 904L Long Radius Bends:
Specifications : ASTM B366 & ASME SB366
Dimensions : ASME/ANSI B16.9 / B16.28 and MSS SP-43 / SP-75
Size : Seamless Pipe Bends (1/2″ – 24″), ERW / Welded / Fabricated Pipe Bends (2″ – 36″)
Outer Diameter : 38.0 mm – 206.0 mm
Wall Thickness : 1.5 mm / 2.0 mm / 3.0 mm – greater wall thickness at request
Bend Radii : 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm
Bending Radius(R): R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Bending angle (θ): 15°, 30°, 45°, 60°, 90°, 135°, 180°
Equivalent Grades of Stainless Steel 904L Long Radius Bends:
| STANDARD | WERKSTOFF NR. | UNS | AFNOR | EN | BS | KS |
| SS 904L | 1.4539 | N08904 | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 | 904S13 | STS 317J5L |
Chemical Composition of Grade 904L Stainless Steel Long Radius Bends:
|
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
Cu |
|
SS 904L |
0.020 max |
2.00 max |
1.00 max |
0.040 max |
0.030 max |
19.00 – 23.00 |
4.00 – 5.00 max |
23.00 – 28.00 |
1.00 – 2.00 |
Mechanical Properties of ASTM B366 Stainless Steel 904L Long Radius Bends:
|
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
|
7.95 g/cm3 |
1350 °C (2460 °F) |
Psi – 71000 , MPa – 490 |
Psi – 32000 , MPa – 220 |
35 % |
Related Products
Inconel 625 Forged Fittings Exporter | Countries and Cities We Supply To
Kalpataru Piping Solutions exports Inconel 625 forged fittings and nickel alloy 625 forgings to over 40 countries worldwide. Our major export destinations include: United States (Houston, Los Angeles, New York), United Kingdom (London, Aberdeen), UAE (Dubai, Abu Dhabi, Sharjah), Saudi Arabia (Dammam, Riyadh, Jubail), Canada (Calgary, Edmonton), Australia (Perth, Brisbane), Germany (Hamburg, Dusseldorf), Netherlands (Rotterdam, Amsterdam), Singapore, Malaysia (Kuala Lumpur), South Korea (Busan, Seoul), Brazil (Rio de Janeiro, Sao Paulo), South Africa (Johannesburg, Durban), Italy (Genoa, Milan), France (Paris, Marseille), Norway (Stavanger, Bergen), and all GCC and Southeast Asian markets.
FAQs - ASTM A53 Grade B Pipe
What is Nickel 200 seamless pipe used for?
Nickel 200 seamless pipe is used wherever maximum corrosion resistance and purity are needed, including oil & gas drilling, chemical processing, food-grade equipment, and marine piping systems.
What is the difference between Nickel 200 and Nickel 201 pipe?
Nickel 200 has a higher carbon content suited to general service below 315°C, while Nickel 201 has low carbon content designed for high-temperature applications above 315°C, avoiding embrittlement issues.
What size range do you supply for Nickel 200 seamless pipes and tubes?
Kalpataru Piping supplies Nickel 200 pipes and tubes in sizes from 4 mm to 219 mm, with wall thickness from 0.5 mm to 20 mm, and lengths up to 13,500 mm, fully customisable to your project.
Do you provide mill test certificates with every order?
Yes, every consignment of Nickel 200 seamless pipe is supplied with EN 10204 3.1 or 3.2 mill test certificates, and third-party inspection can be arranged on request.
Is Nickel 200 pipe suitable for high-temperature applications?
Nickel 200 performs well up to around 315°C (600°F). For higher-temperature service, we recommend Nickel 201, which has a low-carbon composition designed to resist embrittlement at elevated temperatures.
Can Kalpataru Piping supply custom Nickel 200 pipe sizes and forms?
Yes, we manufacture custom sizes, thicknesses, and forms including round, square, rectangular, and hydraulic tube, tailored precisely to your project drawing or specification.
Do you export Nickel 200 seamless pipes and tubes internationally?
Yes, Kalpataru Piping exports Nickel 200 seamless pipes and tubes to over 40 countries worldwide, with complete documentation, secure packing, and reliable shipping support.
