Titanium Grade 7 Forged Fittings
Introduction
kalpataru Piping is one of the leading supplier, manufacturer, exporter, stockist of Titanium grade 7 Forged Fittings in Mumbai, India as well as all over globe. Titanium gr 7 Forged Threaded Fittings. Titanium gr. 7 has high tensile strength, endurance strength, creep strength and rupture strength at 700 Degree C, and high inoxidabile at 1000 Degree C. Titanium Forged Socket Weld Fittings is a high-strength, corrosion-resistant nickel chromium material used at -453 Deg to 1300 Deg F. These titanium gr 7 Forged Threaded Fittings are often used in Oil & Gas Extraction, Nuclear, Aerospace, Defense and Automotive. We Are Manufacturers Of titanium gr. 7 Forged Fittings. Kalpataru is leading Manufacturer and supplier of ASME B16.11 incoloy 800 Forged Fittings in India. We provide to our customer products which have dimensional accuracy, high tension thickness, corrosion resistance and Quality products like titanium grade 7 Socket Weld Unions, titanium gr.7 Forged Couplings & titanium gr 7 800 Forged Elbows. titanium gr. 7 Forged Fittings are manufactured according standards and from the highest quality materials. We widely offer high quality titanium gr 7 Forged Fittings, titanium gr. 7 Forged Tee, Titanium grade 7 Forged Caps and Other range of Forged Pipe Fittings such as titanium grade 7 Forged Elbow, titanium gr 7 Equal Tee, Titanium grade 7 Coupling, titanium gr. 7 Pipe Cap, titanium grade 7 Union, titanium grade 7 Bushing, titanium grade 7 Plug, titanium gr. 7 Pipe Nipple, titanium grade 7 Street Elbow in India. We offer titanium grade 7 forged fittings products in different sizes, specifications and shapes as per demands of our esteemed customers.
Titanium Gr.5 Forged Fittings Chemical Composition
Grade |
Ti | C | Fe | H | N | O | Al | V |
| Titanium Gr.7 | 90 min | – | 0.25 max | – | – | 0.2 max | 6 min | 4 min |
Titanium Grade 7 Fitting Mechanical Properties
Density |
Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
Equivalent Grades for Gr.7 Titanium Forged Fittings
STANDARD |
WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Titanium Gr.7 | 3.7165 | R56400 | – | – | – | – | – |
Related Products
Frequently Asked Questions
What's the difference between Monel 400 and Monel K500 fasteners?
Monel 400 is the standard, lower-cost grade for general corrosion resistance in chemical, marine, and acid service. Monel K500 is age-hardened for roughly double the tensile strength, at a 30–50% cost premium, and earns that premium on high-load or wear applications like shafting and pump components. See our full comparison on the Monel 400 Fasteners page.
Which Monel grade should I use for marine fasteners?
Monel 400 covers the vast majority of marine fastening needs — seawater piping, deck hardware, and general corrosion resistance. Reach for Monel K500 specifically when the application also carries a real mechanical load, like propeller shafting or pump hardware.
Do you supply custom or coated Monel fasteners?
Yes — custom head marking, thread locking compounds, and surface coatings are all available on request, in addition to standard mill-finish fasteners.
What is the minimum order quantity for Monel fasteners?
We run zero MOQ across both grades. Standard sizes are ex-stock in Mumbai for fast dispatch; anything outside standard stock is manufactured to order with no minimum quantity requirement.
What certificates come standard with Monel fasteners?
Every order ships with an EN 10204 3.1 mill test certificate. PMI, third-party inspection (TPI), and NABL-accredited lab reports are available on request for critical applications.
What is the HS code for Monel fasteners?
Generally 7318.15.00, though it's worth confirming the exact classification with your customs broker since it can vary slightly by destination country.
What industries typically use Monel fasteners?
Chemical and petrochemical processing, oil and gas (including sour service), marine and shipbuilding, and defense/aerospace account for the large majority of demand, with occasional specialty use in coastal construction hardware.
What payment and delivery terms do you offer?
We accept LC, TT/wire transfer, and cheque, with export-grade packaging and dispatch from Mumbai or Kalamboli ports. See the Packaging, Payment & Delivery section above for details.
Need Monel 400 Wire Mesh You Can Actually Rely On?
Tell us your mesh count, weave, and quantity, and we'll get you a quote with a real lead time — not a generic price list. Specifying a full system? Run the numbers first with our pipe & tube weight calculator or plates & sheets weight calculator.
