Super Duplex Steel UNS S32760 Round Bars & Super Duplex Steel UNS S32760 Wires
Super Duplex UNS S32760 Round Bars, Rods and ASTM A276 Super Duplex Bright Bars Manufacturer, Exporter and Suppliers.
Super Duplex UNS S32760 Wires, Bobbin Wires and ASME SA276 Super Duplex Wires Manufacturer, Exporter and Suppliers.
Introduction
Kalpataru Piping are one of the leading Manufacturer, Supplier and Exporter of Super Duplex Steel UNS S32760 Round Bars & Super Duplex Steel UNS S32760 Wires that are using high quality raw materials. super Duplex UNS S32760 Rods are specified for pressure vessel applications. Super Duplex UNS S32760 Bars has excellent resistance to stress corrosion cracking in chloride containing environments. Super Duplex Steel UNS S32760 Bars a high strength and a low coefficient of thermal expansion and higher heat conductivity than austenitic steels. Super duplex uns s32760 are used in industries such as Sugar, Paper, Textile, Engineering to more complex such as Oil and Gas, Petrochemical, Chemical and Fertilizers, Power Generation and Nuclear Industries.Standards Specification of Super Duplex Steel UNS S32760 Round Bars and Super Duplex Steel UNS S32760 Wire
| Standard | ASTM A276, A479 / ASME SA276, SA479, ASTM A789 / A789M and ASTM A928 / A928M |
| Size | 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. |
| Grade | UNS S32760 |
| Finish | Bright, Polish and Black |
| End | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. |
ASTM A276, A479 Super Duplex Steel UNS S32760 Round Bars & Super Duplex Steel UNS S32760 Wire Chemical Composition
| Element | S32760 |
| C | 0.030 |
| N | 0.24/0.32 |
| Mn | 1.20 |
| P | 0.035 |
| S | 0.020 |
| Si | 0.80 |
| Cr | 24.0/26.0 |
Super Duplex Steel UNS S32760 Round Bars & Super Duplex Steel UNS S32760 Wires Other Available Products
| Super Duplex Steel UNS S32750 Bars and Rods | Super Duplex Steel UNS S32760 Black Bars |
| Super Duplex Steel Bright Bars | Super Duplex Steel Wire Bobbin |
| Super Duplex Steel UNS S32750 Spring Steel Bars | Super Duplex Steel UNS S32760 Wire Coil |
| Super Duplex Bright Rods Suppliers | Super Duplex Polish Bars and Rods |
| Super Duplex Steel Hot Rolled Round Bar Dealer | Super Duplex Steel Cold Drawn Bars Exporter |
| Super Duplex Steel UNS S32750 Wire Mesh Stockholder | Super Duplex Steel UNS S32760 Bars and Rods Distributors |
| Super Duplex UNS S32750 Filler Wires | Super Duplex UNS S32760 Threaded Rods Manufacturer |
| Super Duplex Steel DIN 1.4410 Hexagon Bars | Super Duplex Steel DIN 1.4410 Wires |
| Super Duplex Steel Rectangle Bar | Super Duplex Steel Wire Coil |
| Super Duplex Cold Drawn Bars | Super Duplex Hex Rods Stockist |
| ASTM A276 Forged Round Rods | ASTM A479 Round Bars |
Related Sections
FAQ’s About Monel Flanges
What is the maximum service temperature for Monel 400 flanges?
Monel 400 flanges can be used up to approximately 550°C (1022°F) in non-oxidizing conditions, making them suitable for high-temperature chemical processing and steam applications.
Can Monel flanges be used with hydrofluoric acid?
Yes. Monel 400 is the industry-standard material for handling hydrofluoric acid at nearly all concentrations and temperatures in de-aerated conditions, which is why it is widely specified for HF alkylation units in refineries.
What is the difference between ASTM B564 and ASME SB564?
ASTM B564 is issued by ASTM International, while ASME SB564 is the equivalent specification adopted by the ASME Boiler and Pressure Vessel Code. The two are technically identical for Monel forged fittings and flanges; ASME SB564 is typically referenced for boiler and pressure-vessel code compliance.
Do you supply Mill Test Certificates with Monel flanges?
Yes. Every Monel flange from Kalpataru Piping is supplied with an EN10204 Type 3.1 Mill Test Certificate as standard. Type 3.2 third-party witnessed certification and additional QAP or radiography documentation can be arranged on request.
What is the typical lead time for Monel flanges?
Standard sizes in Monel 400 and Monel K500 are typically available ex-stock or within a short lead time; custom sizes, pressure classes, or Type 3.2 certification requirements may extend delivery. Contact our sales team with your specification for an accurate lead-time estimate.
What is the difference between a Monel Slip-On Flange and a Monel Weld Neck Flange?
A slip-on flange slides over the pipe end and is fillet-welded on both sides, making it easier and faster to install at lower pressure ratings. A weld neck flange has a tapered hub that is butt-welded to the pipe, giving superior stress distribution and making it the preferred choice for high-pressure, high-temperature, and cyclic-load services.
