Monel 400 Pipe Spools
Monel 400 werkstoff WNR 2.4360 Pipe Spools Manufacturer, Exporter & Suppliers in India.
ASME SB127, ASTM B127 Monel UNS N04400 Pipe Spools Manufacturer, Supplier & Exporter in India.
Introduction
Kalpataru piping solutions is leading manufacturer, supplier, exporters and stoickest for high quality monel 400 Pipe Spools. Kalpataru piping solutions offer a complete range of monel 400 Pipe Spools as Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) and more. monel 400 Pipe Spools are widely used in various application industries like sea water and brackish waters and acids like sulphuric acid and many others. Kalpataru piping solutions export, Supply & Manufacture monel 400 forms like seamless pipe, tubes, plates, sheets, shims, Pipe Spools, round bars, wires, Pipe Spools, valves, Pipe Spools and many others.
Equivalent Grades of Monel 400 Pipe Spools
| STANDARD | WERKSTOFF NR. | UNS | JIS | AFNOR | BS | GOST | EN |
| Monel 400 | 2.4360 | N04400 | NW 4400 | NU-30M | NA 13 | МНЖМц 28-2,5-1,5 | NiCu30Fe |
Specifications of Monel 400 Pipe Spools
Standards : ASTM, ASME and API
Specifications : ASTM B 127 / SB 127
Hole Diameter : 2mm to 12mm
Sheet Size : 1000mm to coil 1500mm
Length : Standard or Coil Form
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Grade : Monel 400 (UNS N04400)
Chemical Composition of Monel 400 Pipe Spools
| Ni | Fe | C | Mn | Si | Cu | Al | Ti | S | |
| Monel 400 | 63.0 min | 1.0 – 2.5 | 0.3 max | 2.0 max | 0.5 max | 28.0 – 34.0 | 0.50 max | – | 0.02 max |
Mechanical & Physical Properties of Monel 400 Pipe Spools
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Types of Monel 400 Pipe Spools
- Monel 400 Spool Fitting
- Monel Spool Fittings
- Monel Alloy 400 Spool Fittings
- ASME SB127 Monel 400 Spool Fittings
- Monel Alloy 400 Pipe Spool
- Monel 400 Pipe Spools Stockholder
- ASTM B127 Monel Alloy 400 Prefabricated Pipe Spool
- Monel 400 Prefabricated Pipe Spool Stockholder to Czechia
- DIN 2.4360 Monel Spool Fittings
- Monel 400 Prefabricated Pipe Spool
- Prefabricated Pipe Spools
- Spool Fittings
- Monel 400 Pipe Spool
- Alloy 400 Prefabricated Pipe Spools
- ASME SB127 Monel 400 Spool Fitting
- Monel 400 Pipe Spools Stockist
- Pipe Spool
Marking & Packing Of Monel 400 Pipe Spools
Kalpataru Piping Solutions pack Monel 400 Pipe Spools properly and carefully to ensure that there is no damage to the Monel 400 Pipe Spools during the transit. We pack Monel 400 Pipe Spools in wooden boxes and supply it all over the world.
High-Quality Monel 400 Pipe Spools – Quality Assurance!
Kalpataru Piping Solutions Is One Of The Most Trusted Exporter, Supplier, Stockist & Manufacturer Of Monel 400 Pipe Spools . Kalpataru Piping Solutions Offers High-Quality Monel 400 Pipe Spools. We Inspect Our Monel 400 Pipe Spools At Each Stage Of Production Process, To Make Sure That The Quality Of The Monel 400 Pipe Spools Is Not Compromised. They Are Examined To Confirm Their Standards And We Also Offer Third Party Inspection Of Our Monel 400 Pipe Spools On Demand Of Our Clients. Kalpataru piping solutions even Offer Test Certificates For Our Monel 400 Pipe Spools.
We Pack Monel 400 Pipe Spools Properly And Carefully To Ensure That There Is No Damage To Monel 400 Pipe Spools During The Transit. We Pack copper Monel 400 Pipe Spools In Wooden Boxes And Supply It All Over The World.
Why Choose Kalpataru Piping Solutions For Buying Monel 400 Pipe Spools?
- Huge Stock Of Monel 400 Pipe Spools.
- Large Production Capacity Of Monel 400 Pipe Spools
- Kalpataru Piping Solutions Offer Highest Quality Monel 400 Pipe Spools At Lowest Price
- We Offer Customised Sizes For Monel 400 Pipe Spools Depending On Our Clients Requirement
Kalpataru Piping Solutions Offer High-Quality Monel 400 Pipe Spools With Test Certificates. We Even Allow Third Party Inspection.
Related Products
FAQ’s About ASTM A106 Grade B Pipes
What is ASTM A106 Grade B pipe?
ASTM A106/A106M Grade B is a seamless carbon steel pipe specification intended for high-temperature service. The exact project suitability depends on the governing piping code, design conditions and purchase specification.
What is the difference between ASTM A106 Grade B and ASTM A53 Grade B?
ASTM A106 Grade B is a seamless high-temperature-service pipe specification. ASTM A53 Grade B covers welded and seamless pipe for mechanical and pressure applications and ordinary steam, water, gas and air service. Select the specification required by the project and design code.
What sizes does Kalpataru supply?
The current brief lists a Kalpataru supply range of 1/2 to 36 in NPS and Schedule 10 to XXS, subject to size and availability. ASTM A106/A106M itself has a wider standard scope.
What is the maximum temperature of ASTM A106 Grade B pipe?
Do not use one universal maximum temperature from the ASTM material specification. Allowable service depends on the design code, pressure, wall thickness, allowable stress and project conditions.
Is ASTM A106 Grade B seamless or welded?
ASTM A106/A106M is a seamless carbon steel pipe specification. Do not describe ERW, LSAW or other welded pipe as ASTM A106 product construction.
What tests are required for ASTM A106 Grade B pipe?
The specification includes mechanical testing and bend/flattening testing as applicable, together with hydrostatic and/or nondestructive electric testing requirements. The exact inspection package should match the current ASTM edition and purchase order.
What documents can be supplied?
Orders can be supplied with EN 10204 3.1 MTC and, where applicable and agreed, IBR documentation, third-party inspection and project-specific test reports.
How is ASTM A106 Grade B pipe priced?
Price depends on NPS, schedule or wall thickness, length, quantity, origin/mill, testing/certification, coating/end preparation and delivery destination. Send the full requirement for a size-wise quotation.
