Tantalum Shims
Tantalum UNS R05400 Shims, ASTM B521 Ta2.5W shims, Tantalum shims Price, Tantalum UNS R05200 shims Suppliers In India.
Tantalum shims Manufacturer, Exporter & Suppliers in India.
Introduction
Kalpataru piping solutions is leading manufacturer, supplier, exporters and stoickest for high quality Tantalum shims. Kalpataru piping solutions offer a complete range of Tantalum shims such as Round, Square, Rectangular, Hydraulic etc. Tantalum shims has bright annealed or bright annealed and cold rolled grease, where ultra – bright finishes is used for decorative applications. Kalpataru piping solutions export, Supply & Manufacturer Tantalum forms like seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges. With respect to international quality of raw materials, we also offer these AS Tantalum in customized sizes and thicknesses as per specific demands by our esteemed clients at market leading prices.
ASTM B729, B464, B468 Tantalum shims Specification
Material : RO5200， RO5400， RO5252(Ta2.5W)， RO5255(Ta10W)
Diameter : φ1.0-150mm
Thickness : 0.2-5.0mm
Length : 100mm-12000mm
Standard : As per ASTM B521-98
Tantalum (Ta) shims Equivalent Indian Standard:
STANDARDUNS |
R05200 |
R05400 |
R05255 |
R05252 |
R05240 |
Tantalum shims Chemical Compositions:
|
Element |
R05200 (%,Max) |
R05400 (%,Max) |
|
C |
0.01 |
0.01 |
|
O |
0.015 |
0.03 |
|
N |
0.01 |
0.01 |
|
H |
0.0015 |
0.0015 |
|
Fe |
0.01 |
0.01 |
|
Mo |
0.02 |
0.02 |
|
Nb |
0.1 |
0.1 |
|
Ni |
0.01 |
0.01 |
|
Si |
0.005 |
0.005 |
|
Ti |
0.01 |
0.01 |
|
W |
0.05 |
0.05 |
Tantalum shims Physical & Mechanical Properties:
|
Grade |
Tensile strength δbpsi (MPa)， ≥ |
Yield strength δ0.2， psi (MPa)，≥ |
Elongation in 1″/2″ gage length， ％， ≥ |
|
RO5200/RO5400 |
30000 (207) |
20000 (138) |
25 |
|
RO5252 |
40000 (276) |
28000 (193) |
20 |
|
RO5255 |
70000 (481) |
60000 (414) |
15 |
|
RO5240 |
40000 (276) |
28000 (193) |
20 |
|
Special requirements to be agreed on by the supplier and buyer of negotiation |
|||
Other Types of Tantalum shims:
- Tantalum shims
- ASTM B521 Tantalum shims
- Tantalum UNS R05400 shims Manufacturer
- ASTM B365 Ta2.5W shims
- Tantalum UNS R05200 shims
- Ta-10W shims Supplier
- Tantalum shims Exporter
- Ta shims Dealer
- Ta shims
- Tantalum Ta10W shims Price
- Tantalum RO5252 shims Distributor
Marking & Packing Of Tantalum shims:
Kalpataru Piping Solutions Pack Tantalum shims Properly And Carefully To Ensure That There Is No Damage To The Tantalum shims During The Transit. We Pack Tantalum shims In Wooden Boxes And Supply It All Over The World.
High-Quality Tantalum shims – Quality Assurance!
Kalpataru Piping Solutions Is One Of The Most Trusted Exporter, Supplier, Stockist & Manufacturer Of Tantalum shims. Kalpataru Piping Solutions Offers High-Quality Tantalum shims. We Inspect Our Tantalum shims At Each Stage Of Production Process To Make Sure That The Quality Of The shims Is Not Compromised. They Are Examined To Confirm Their Standards And We Also Offer Third Party Inspection Of Our Tantalum shims On Demand Of Our Clients. Kalpataru piping solutions even Offer Test Certificates For Our Tantalum shims.
We Pack Tantalum Shims Properly And Carefully To Ensure That There Is No Damage To Tantalum Shims During The Transit. We Pack Tantalum Shims In Wooden Boxes And Supply It All Over The World.
Why Choose Kalpataru Piping Solutions For Buying A Tantalum Shims?
- Huge Stock Of Tantalum Shims.
- Large Production Capacity Of Tantalum Shims.
- Kalpataru Piping Solutions Offer Highest Quality Tantalum Shims At Lowest Price
- We Offer Customised Sizes For Tantalum Shims Depending On Our Clients Requirement
- Kalpataru Piping Solutions Offer High-Quality Tantalum Shims With Test Certificates. We Even Allow Third Party Inspection.
FAQ’s About Monel Flanges
What is the maximum service temperature for Monel 400 flanges?
Monel 400 flanges can be used up to approximately 550°C (1022°F) in non-oxidizing conditions, making them suitable for high-temperature chemical processing and steam applications.
Can Monel flanges be used with hydrofluoric acid?
Yes. Monel 400 is the industry-standard material for handling hydrofluoric acid at nearly all concentrations and temperatures in de-aerated conditions, which is why it is widely specified for HF alkylation units in refineries.
What is the difference between ASTM B564 and ASME SB564?
ASTM B564 is issued by ASTM International, while ASME SB564 is the equivalent specification adopted by the ASME Boiler and Pressure Vessel Code. The two are technically identical for Monel forged fittings and flanges; ASME SB564 is typically referenced for boiler and pressure-vessel code compliance.
Do you supply Mill Test Certificates with Monel flanges?
Yes. Every Monel flange from Kalpataru Piping is supplied with an EN10204 Type 3.1 Mill Test Certificate as standard. Type 3.2 third-party witnessed certification and additional QAP or radiography documentation can be arranged on request.
What is the typical lead time for Monel flanges?
Standard sizes in Monel 400 and Monel K500 are typically available ex-stock or within a short lead time; custom sizes, pressure classes, or Type 3.2 certification requirements may extend delivery. Contact our sales team with your specification for an accurate lead-time estimate.
What is the difference between a Monel Slip-On Flange and a Monel Weld Neck Flange?
A slip-on flange slides over the pipe end and is fillet-welded on both sides, making it easier and faster to install at lower pressure ratings. A weld neck flange has a tapered hub that is butt-welded to the pipe, giving superior stress distribution and making it the preferred choice for high-pressure, high-temperature, and cyclic-load services.
