Incoloy 800/800h/800ht Filler wire
Introduction
Kalpataru Piping is a leading Manufacturer, Exporter, Supplier and Stockist of Incoloy 800/800h/800ht Filler Wire in India. Incoloy 800/800h/800ht Filler Wire are used where the properties of steel and corrosion resistance are required.. Heat treatment (solution annealing) of Incoloy Wire has to be done if the technical standard specify about the same. Normally incoloy 800 filler Wire are being heat treated with water quenching incoloy. These Wire have to be heated up to 1080 degree Celsius temperature and thereafter it has to drop the temperature by water quenching incoloy. These incoloy is being conducted on incoloy Bright Wire on as rolled condition. . These incoloy 800/800h/800ht Series Fillers Wires are used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425 Degree C – 850 Degree C. inconel 800 Welding Wires has the higher carbon content, which makes it ideal for applications requiring good mechanical properties at elevated temperatures. Incoloy 800/800h/800ht Filler Wire exhibit excellent resistance to a wide range of atmospheric, chemical, textile, petroleum industry, and food industry exposures. We also offer incoloy 800 Filler Wires who doesn’t require post-weld annealing, and is widely used in heavy-gauge components where its immunity to carbide precipitation is needed. We offer wide range of incoloy filler wires such as Incoloy 800/800h/800ht Filler Wire. These inconel alloy 800 filler wire, incoloy alloy 800h filler wires, incoloy alloy 800ht filler wires are available in various sizes, shapes as per the requirements of our clients.
Incoloy 800/800H/800HT Filler Wire Specifications:
| Specifications | : | AMS 5766 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire |
800 / 800H / 800HT Incoloy Filler Wire Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60ᴬ | 0.15 – 0.60ᴬ |
Incoloy 800 / 800H / 800HT Filler Wire Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 800 / 800H / 800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
Equivalent Grades for 800 / 800H / 800HT Incoloy Filler Wire
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
Related Products
- Incoloy 800/800H/800T Instrumentation Valves
- Incoloy 800/800H/800T Filler Wire
- Incoloy 800/800H/800T Long Radius Bends
- Incoloy 800/800H/800T Pipes Spools
- Incoloy 800/800H/800T Wiremesh
- Incoloy 825 Instrumentation Valves
- Incoloy 825 Filler Wire
- Incoloy 825 Long Radius Bends
- Incoloy 825 Pipes Spools
- Incoloy 825 Wiremesh
FAQ’s About ASTM A106 Grade B Pipes
What is ASTM A106 Grade B pipe?
ASTM A106/A106M Grade B is a seamless carbon steel pipe specification intended for high-temperature service. The exact project suitability depends on the governing piping code, design conditions and purchase specification.
What is the difference between ASTM A106 Grade B and ASTM A53 Grade B?
ASTM A106 Grade B is a seamless high-temperature-service pipe specification. ASTM A53 Grade B covers welded and seamless pipe for mechanical and pressure applications and ordinary steam, water, gas and air service. Select the specification required by the project and design code.
What sizes does Kalpataru supply?
The current brief lists a Kalpataru supply range of 1/2 to 36 in NPS and Schedule 10 to XXS, subject to size and availability. ASTM A106/A106M itself has a wider standard scope.
What is the maximum temperature of ASTM A106 Grade B pipe?
Do not use one universal maximum temperature from the ASTM material specification. Allowable service depends on the design code, pressure, wall thickness, allowable stress and project conditions.
Is ASTM A106 Grade B seamless or welded?
ASTM A106/A106M is a seamless carbon steel pipe specification. Do not describe ERW, LSAW or other welded pipe as ASTM A106 product construction.
What tests are required for ASTM A106 Grade B pipe?
The specification includes mechanical testing and bend/flattening testing as applicable, together with hydrostatic and/or nondestructive electric testing requirements. The exact inspection package should match the current ASTM edition and purchase order.
What documents can be supplied?
Orders can be supplied with EN 10204 3.1 MTC and, where applicable and agreed, IBR documentation, third-party inspection and project-specific test reports.
How is ASTM A106 Grade B pipe priced?
Price depends on NPS, schedule or wall thickness, length, quantity, origin/mill, testing/certification, coating/end preparation and delivery destination. Send the full requirement for a size-wise quotation.
