Aluminium Pipes & Tubes Manufacturer & Supplier in India
Home > Pipes & Tubes > Aluminium Pipes & Tubes
Aluminium pipes and tubes are light, corrosion resistant products for applications in the transport, marine, construction and process industries. Pipes are normally used for fluid or chemical transference while tubes are used for structural or fabrication jobs that require accurate dimensions. We extrude products in a variety of grades including 2014, 2024, 5083, 5086, 6061, 6063 and 7075 and to a wide range of ASTM B221 and related standards, with the profile and wall thickness specified by your drawing. A reliable aluminium pipe and tube supplier, Kalpataru Piping meets the requirements of the oil and gas industry, the marine industry, construction, automotive and general engineering industry for seamless and welded aluminium pipes that are durable, weldable and have a long service life.
Looking for a different base metal? See our full pipes and tubes range, including stainless steel and duplex steel pipes.
Table of Contents
- Aluminium Pipes & Tubes Specification
- Chemical Composition (Aluminium 2014 Series)
- Aluminium Pipes & Tubes Mechanical Properties (2014-T6)
- UNS A92014 Aluminium Pipes & Tubes Equivalent Grades
- Types of Aluminium Pipes & Tubes
- Aluminium Pipe & Tube Dimension Chart
- Aluminium Tube Size Chart
- Pressure Rating Chart of Aluminium Tubes
- Quality, Packing and Why Choose Kalpataru Piping
- FAQs
- Specifications
- Chemical Composition
- Mechanical Properties
- Dimension Chart
- Size Chart
- Pressure Rating Chart
Aluminium Pipes & Tubes Specification
| Parameter | Details |
| Standard | ASTM / ASME SB221 |
| Outer Diameter | 1″ through 16″ |
| Thickness | Schedule 40 (custom on request) |
| Grade | 2014, 2024, 5083, 5086, 6061, 6063, 7075 |
| Type | Seamless / ERW / Welded / Fabricated / LSAW pipes |
| Form | Round, square, rectangular, hydraulic |
| End | Plain end, bevelled end, threaded |
| Length | Single random, double random, cut length |
Chemical Composition (Aluminium 2014 Series)
|
Element |
Si |
Fe |
Cu |
Zn |
Mn |
Mg |
Ti |
Cr |
Ni |
Al |
Others (Total) |
|
% Present |
0.50-0.90 |
0.0-0.50 |
3.90-5.00 |
0.0-0.25 |
0.40-1.20 |
0.20-0.80 |
0.0-0.15 |
0.0-0.10 |
0.0-0.10 |
Balance |
0.0-0.15 |
Aluminium Pipes & Tubes Mechanical Properties (2014-T6)
|
Property |
Value |
|
Tensile Yield Strength |
60,000 psi |
|
Ultimate Tensile Strength |
70,000 psi |
|
Modulus of Elasticity |
10,500 ksi |
|
Elongation |
13% |
|
Hardness |
155 |
Aluminium Pipe & Tube Dimension Chart
|
NPS |
OD (mm) |
Wall Thickness (mm) |
Approx. Weight (kg/m) |
|
1/2 |
21.3 |
2.11 |
1.02 |
|
3/4 |
26.7 |
2.11 |
1.30 |
|
1 |
33.4 |
2.77 |
2.13 |
|
1 1/2 |
48.3 |
2.77 |
3.16 |
|
2 |
60.3 |
2.77 |
3.99 |
|
3 |
88.9 |
3.05 |
6.56 |
|
4 |
114.3 |
3.05 |
8.50 |
|
6 |
168.3 |
3.40 |
14.04 |
|
8 |
219.1 |
3.76 |
20.08 |
For current pricing, contact us with your size, grade and quantity, since aluminium ingot prices move with the commodity market.
Aluminium Tube Size Chart
|
Wall Thickness (in.) |
Available Tube Sizes (O.D.) |
|
.028 |
1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 3/4″, 1″, 1 1/2″, 2″ |
|
.035 |
1/8″ to 2 1/4″ across intermediate sizes |
|
.049 |
3/16″ to 2 1/4″ across intermediate sizes |
|
.065 |
1/4″ to 3″ across intermediate sizes |
|
.083 |
1/4″ to 3″ across intermediate sizes |
|
.109 |
1/2″ to 2″ across intermediate sizes |
|
.120 |
1/2″ to 3″ across intermediate sizes |
Pressure Rating Chart of Aluminium Tubes
|
Tube OD (in.) |
Wall .028″ |
Wall .035″ |
Wall .049″ |
Wall .065″ |
|
1/8 |
7900 |
10100 |
– |
– |
|
1/4 |
3700 |
4600 |
7000 |
9500 |
|
3/8 |
– |
3100 |
4400 |
6100 |
|
1/2 |
– |
2300 |
3200 |
4400 |
|
3/4 |
– |
2200 |
3000 |
4000 |
|
1 |
– |
2200 |
2900 |
3400 |
Types of Aluminium Pipes & Tubes
- Aluminium Seamless Pipes and Tubes
- Aluminium Welded Pipes and Tubes
- Aluminium ERW Pipes and Tubes
- Aluminium EFW Pipes and Tubes
- Aluminium Rectangular Pipes and Tubes
Quality, Packing and Why Choose Kalpataru Piping
Every batch of aluminium pipe and tube is inspected at each stage of production and tested before dispatch, with material test certificates provided as standard and third-party inspection available on request. We pack pipes and tubes in wooden boxes for export and ship worldwide.
Why buy from us
- Large ready stock across standard grades and sizes, with custom sizes available on request.
- Test certificates and, where required, third-party inspection on every order.
- Direct manufacturer pricing with material cut and finished to your specification
FAQs
Which aluminium grade should I choose?
6061 works well for general and structural use. 5083/5086 suit marine corrosion resistance. 2014/2024 offer higher strength. 7075 gives the best strength to weight ratio. 6063 suits architectural finishes. Tell us your application for a recommendation.
Pipe or tube, which do I need?
Pipe is sized by nominal size and schedule, mainly for fluid transfer. Tube is sized by exact OD and wall thickness, used where precise dimensions matter. Need an exact OD and thickness? Go with tube.
Seamless, ERW or welded, which should I pick?
Seamless suits higher pressure or critical service. ERW and welded work well for larger diameters at lower pressure. LSAW suits larger diameters with heavier walls. Share your pressure rating and diameter and we’ll advise.
Can I get custom sizes or lengths?
Yes. Standard stock covers 1 inch to 16 inch OD in Schedule 40. Custom OD, wall thickness and cut lengths are available on request, extruded to your drawing.
What documentation comes with my order?
Every batch is inspected and tested before dispatch, and a material test certificate is included as standard. Third party inspection is available on request.
How is my order packed and shipped?
Pipes and tubes are packed in wooden export boxes and shipped worldwide, with test certificates included as standard documentation.
Related Products
FAQ’s About Monel Flanges
What is the maximum service temperature for Monel 400 flanges?
Monel 400 flanges can be used up to approximately 550°C (1022°F) in non-oxidizing conditions, making them suitable for high-temperature chemical processing and steam applications.
Can Monel flanges be used with hydrofluoric acid?
Yes. Monel 400 is the industry-standard material for handling hydrofluoric acid at nearly all concentrations and temperatures in de-aerated conditions, which is why it is widely specified for HF alkylation units in refineries.
What is the difference between ASTM B564 and ASME SB564?
ASTM B564 is issued by ASTM International, while ASME SB564 is the equivalent specification adopted by the ASME Boiler and Pressure Vessel Code. The two are technically identical for Monel forged fittings and flanges; ASME SB564 is typically referenced for boiler and pressure-vessel code compliance.
Do you supply Mill Test Certificates with Monel flanges?
Yes. Every Monel flange from Kalpataru Piping is supplied with an EN10204 Type 3.1 Mill Test Certificate as standard. Type 3.2 third-party witnessed certification and additional QAP or radiography documentation can be arranged on request.
What is the typical lead time for Monel flanges?
Standard sizes in Monel 400 and Monel K500 are typically available ex-stock or within a short lead time; custom sizes, pressure classes, or Type 3.2 certification requirements may extend delivery. Contact our sales team with your specification for an accurate lead-time estimate.
What is the difference between a Monel Slip-On Flange and a Monel Weld Neck Flange?
A slip-on flange slides over the pipe end and is fillet-welded on both sides, making it easier and faster to install at lower pressure ratings. A weld neck flange has a tapered hub that is butt-welded to the pipe, giving superior stress distribution and making it the preferred choice for high-pressure, high-temperature, and cyclic-load services.
