Nickel 200 Pipes and Tubes
Nickel Alloy 200 werkstoff nr. 2.4066 Pipes & Tubes Suppliers, Manufacturer, Exporter in India.
ASTM B161 / 163 / 725 / 730 Nickel Alloy UNS No. N02200 Seamless Pipes & Tubes, Welded Pipes & Tubes Suppliers. In India
Introduction
Kalpataru Piping is a leading Manufacturer, Exporter, Supplier and Stockist of nickel 200 pipe and tube in India. Nickel alloy 200 pipes tubes has greater strength. Also with this, this grade pipe becomes greatly resistance to both corrosion and oxidation. UNS N02200 tubes and pipes are available in custom-made specification varying in size, thickness as per the client requests. Adding chromium, molybdenum, copper and other elements to these Nickel 200 Pipes and Tubes gives them an even higher resistance to oxidation and corrosion which makes it possible to use them in a wider range of applications. These Nickel 200 pipes & tubes widely used in various applications industry like oil & gas, drilling & well building and chemical industries etc. We offer WNR 2.4066 Pipes and Tubes (UNS N02200) are available in different size, grades, specification & Thickness as per the clients requirements.
Specification
|
Size |
: |
4 to 219mm W. T.: 0.5 to 20mm |
|
Standards |
: |
ASTM / ASME |
|
Type |
: |
Seamless / ERW / Welded / Fabricated / LSAW Pipes |
|
Length |
: |
Within 13500mm |
|
Form |
: |
Round, Square, Rectangular, Hydraulic Etc. |
|
Grade |
: |
Nickel Alloy 200 (UNS No. N02200) Pipes & Tubes, 2.4060, 2.4066 Nickel 200 Seamless Pipes & Tubes: 161 / 163,B 161 / B 163 Nickel 200 Welded Pipes & Tubes: 725 / 730, B 725 / B730 |
|
STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
AFNOR |
BS |
GOST |
EN |
|
Nickel 200 |
2.4066 |
N02200 |
NW 2200 |
N-100M |
NA 11 |
НП-2 |
Ni 99.2 |
Chemical Composition
|
Nickel Alloy 200 |
Ni |
Fe |
C |
Mn |
Si |
Cu |
Mg |
Ti |
S |
|
99.0 min |
0.4 max |
0.15 max |
0.35 max |
0.1 max |
0.25 max |
– |
– |
0.01 max |
Mechanical & Physical Properties
|
Density |
8.9 g/cm3 |
|
Melting Point |
1446 °C (2635 °F) |
|
Tensile Strength |
Psi – 67000 , MPa – 462 |
|
Yield Strength (0.2%Offset) |
Psi – 21500 , MPa – 148 |
|
Elongation |
45 % |
Inconel 625 Forged Fittings Exporter | Countries and Cities We Supply To
Kalpataru Piping Solutions exports Inconel 625 forged fittings and nickel alloy 625 forgings to over 40 countries worldwide. Our major export destinations include: United States (Houston, Los Angeles, New York), United Kingdom (London, Aberdeen), UAE (Dubai, Abu Dhabi, Sharjah), Saudi Arabia (Dammam, Riyadh, Jubail), Canada (Calgary, Edmonton), Australia (Perth, Brisbane), Germany (Hamburg, Dusseldorf), Netherlands (Rotterdam, Amsterdam), Singapore, Malaysia (Kuala Lumpur), South Korea (Busan, Seoul), Brazil (Rio de Janeiro, Sao Paulo), South Africa (Johannesburg, Durban), Italy (Genoa, Milan), France (Paris, Marseille), Norway (Stavanger, Bergen), and all GCC and Southeast Asian markets.
FAQs - ASTM A53 Grade B Pipe
What is Nickel 200 seamless pipe used for?
Nickel 200 seamless pipe is used wherever maximum corrosion resistance and purity are needed, including oil & gas drilling, chemical processing, food-grade equipment, and marine piping systems.
What is the difference between Nickel 200 and Nickel 201 pipe?
Nickel 200 has a higher carbon content suited to general service below 315°C, while Nickel 201 has low carbon content designed for high-temperature applications above 315°C, avoiding embrittlement issues.
What size range do you supply for Nickel 200 seamless pipes and tubes?
Kalpataru Piping supplies Nickel 200 pipes and tubes in sizes from 4 mm to 219 mm, with wall thickness from 0.5 mm to 20 mm, and lengths up to 13,500 mm, fully customisable to your project.
Do you provide mill test certificates with every order?
Yes, every consignment of Nickel 200 seamless pipe is supplied with EN 10204 3.1 or 3.2 mill test certificates, and third-party inspection can be arranged on request.
Is Nickel 200 pipe suitable for high-temperature applications?
Nickel 200 performs well up to around 315°C (600°F). For higher-temperature service, we recommend Nickel 201, which has a low-carbon composition designed to resist embrittlement at elevated temperatures.
Can Kalpataru Piping supply custom Nickel 200 pipe sizes and forms?
Yes, we manufacture custom sizes, thicknesses, and forms including round, square, rectangular, and hydraulic tube, tailored precisely to your project drawing or specification.
Do you export Nickel 200 seamless pipes and tubes internationally?
Yes, Kalpataru Piping exports Nickel 200 seamless pipes and tubes to over 40 countries worldwide, with complete documentation, secure packing, and reliable shipping support.
