Fasteners Manufacturers

From oil & gas rigs to nuclear power plants — Kalpataru Piping engineers high-performance fasteners in 200+ alloys, compliant with ASTM, ASME, DIN, BS, and EN standards.

✔ISO Certified Manufacturer
✔ASTM / ASME / DIN Compliant
✔Export to 50+ Countries
✔200+ Material Grades
Fasteners Manufacturers

Kalpataru Piping stands among the most reliable fasteners manufacturers in India, delivering precision-engineered bolts, nuts, studs, washers, and threaded rods to industries that cannot afford failure. With decades of hands-on manufacturing experience and a material portfolio spanning over 200 alloy grades — from standard carbon steel to exotic Inconel, Hastelloy, Monel, Duplex, and Titanium — we bring unmatched depth to every fastener requirement. Every component we produce is engineered to meet internationally recognised standards including ASTM, ASME, DIN, BS, ISO, and EN, making Kalpataru Piping a preferred sourcing partner for oil and gas, petrochemical, power generation, chemical processing, marine, and aerospace sectors. As a vertically integrated manufacturer, we control quality at every stage — from raw material selection and precision machining through heat treatment, surface finishing, and final dimensional inspection — ensuring that each fastener you receive performs exactly as specified, every single time. Whether you need a standard hex bolt in stainless steel or a custom-engineered stud bolt in Inconel 625 for a high-temperature, high-pressure application, Kalpataru Piping has the capability, certification, and commitment to deliver. Explore our industrial fasteners range or connect with our technical team for application-specific guidance.

What Are Industrial Fasteners?

Industrial fasteners are mechanically engineered components — bolts, nuts, studs, washers, screws, and threaded rods — designed to join two or more structures together with reliable, repeatable force. In demanding industrial environments such as oil refineries, chemical plants, power stations, and offshore platforms, fasteners are literally the elements that hold everything together under extremes of temperature, pressure, vibration, and corrosive media.

Unlike standard commercial fasteners, industrial fasteners manufacturers produce components that must conform to exacting dimensional tolerances, defined mechanical properties (tensile strength, yield strength, hardness, and impact resistance), and strict material traceability. A single under-spec fastener in a pressurised piping joint or a flanged connection can trigger catastrophic failure — making the choice of manufacturer as critical as the choice of fastener itself.

At Kalpataru Piping, every fastener we manufacture is built for the harshest duty cycles. Our range pairs with our broader piping solutions — from flanges and forged fittings to pipes and tubes — so you can source complete, specification-matched piping assemblies from one trusted partner.

Why Material Selection Matters in Fasteners

Different operating environments demand different alloy fasteners:

  • Stainless Steel — General corrosion resistance, hygienic and food-grade applications
  • Carbon Steel — High-strength structural and pressure-retaining joints
  • Alloy Steel (P5, P11, P22, P91) — Elevated-temperature power and process plant service
  • Nickel Alloys (Inconel, Hastelloy, Monel) — Extreme heat, cryogenic, and aggressive chemical service
  • Duplex & Super Duplex Steel — Chloride-rich environments, offshore, and desalination
  • Titanium — Lightweight, seawater-resistant applications in aerospace and marine
  • Copper-Nickel, Aluminium, Brass — Marine, heat-exchanger, and electrical applications

Types of Fasteners We Manufacture

As a full-range industrial fasteners manufacturer, Kalpataru Piping produces every major fastener category in a wide selection of materials and grades. Each product line is manufactured to the dimensional, mechanical, and surface-finish requirements of the applicable international standard.

Bolts

Bolts are externally threaded fasteners designed to pass through aligned holes and secure with a mating nut or into a tapped hole. We manufacture:

  • Hex Head Bolts (HHB)
  • Heavy Hex Bolts
  • Square Head Bolts
  • Carriage Bolts
  • Flange Bolts
  • T-Head Bolts
  • Eye Bolts
  • U-Bolts
  • J-Bolts
  • Anchor / Foundation Bolts
  • Socket Head Cap Screws

Standards: ASME B18.2.1, DIN 931, DIN 933, ISO 4014, ISO 4017

Nuts

Nuts are internally threaded fasteners that engage bolt threads to form a clamped joint. Kalpataru Piping supplies:

  • Heavy Hex Nuts
  • Hex Coupling Nuts
  • Hex Thin (Jam) Nuts
  • Square Nuts
  • Castle / Slotted Nuts
  • Self-Locking (Nylock) Nuts
  • Dome Cap Nuts
  • Weld Nuts
  • Flange Nuts

Standards: ASME B18.2.2, DIN 934, DIN 985, ISO 4032, ISO 7042

Stud Bolts

Stud bolts are used in high-pressure flanged joints across the process industry. We manufacture fully threaded, tap-end, and double-end studs — the most widely specified fastener for pipeline flanges.

  • Fully Threaded Studs
  • Tap-End Studs
  • Double-End Studs
  • Weld Studs
  • Tie Rods

Standards: ASTM A193, ASTM A307, ASME B16.5, ASME B18.31

Washers

Washers distribute bearing load, prevent surface damage, and improve joint integrity. Our range:

  • Plain / Flat Washers
  • Spring Lock Washers
  • Star / Tooth Washers
  • Taper Washers
  • Belleville (Disc Spring) Washers
  • Structural / Heavy Duty Washers

Standards: ASME B18.22.1, DIN 125, DIN 127, ISO 7089, ISO 7090

Screws

  • Pan Head Slotted Screws
  • Countersunk Head Screws
  • Socket Head Allen Cap Screws
  • Machine Screws
  • Self-Tapping Screws
  • Set Screws / Grub Screws

Threaded Rods

Fully or partially threaded rods used in structural tie, hanger, and anchor assemblies — available in metric and imperial thread forms across all major alloy grades.

Fastener Material Range

Shop by material to find the right fastener for your service conditions:

Technical Specifications of Fastener

Parameter Details
Standards ASTM, ASME, DIN, BS, EN, ISO, JIS, SAE
Size Range (Metric) M2 to M160
Size Range (Imperial) ¼” to 4″ (and custom)
Length Range 4 mm to 3000 mm (custom lengths available)
Thread Forms Metric (Coarse & Fine), UNC, UNF, UNEF, BSW, BSF, BSP, NPT, ACME
Thread Tolerance 6g / 6H (ISO 965-1); 2A / 2B (ASME B1.1)
Tensile Strength 400 MPa to 1400+ MPa (material/grade dependent)
Hardness Range 70 HRB to 45 HRC (application-specific)
Coating / Finish Plain, Zinc Plated, HDG, BZP, Dacromet, Xylan, PTFE, Passivated, Phosphated
Packing Bulk bags, cartons, wooden pallets, custom labelling
Testing Hardness, Tensile, Charpy Impact, Hydrogen Embrittlement, Proof Load, Dimensional
Documentation MTC EN 10204 3.1 / 3.2, Chemical Analysis, PMI, NACE, PED
Form Description
Hex (Hexagonal) Most common; wrench-driven on six flats
Square Four-flat head for high-torque applications
Round Used in carriage bolts; prevents rotation
Countersunk / Flat Flush-mount applications
Flanged Integral washer face distributes load
Socket / Allen Internal hex drive for recessed fitment
Eye / Hook Loop head for hanging and lifting

Thread Standards Cross-Reference

Thread System Standard Common Application
Metric Coarse (MC) ISO 261 / DIN 13 General engineering worldwide
Metric Fine (MF) ISO 261 Thin-walled and vibration-prone joints
UNC / UNF ASME B1.1 North American process industry
BSW / BSF BS 84 Legacy UK equipment
BSP (G-Thread) ISO 228 Pipe fittings and hydraulics
NPT ASME B1.20.1 Tapered pipe threads, North American
ACME / Trapezoidal DIN 103 Lead screws, actuators

Materials & Grades

Kalpataru Piping maintains one of India’s broadest fastener material portfolios. Every grade is sourced from traceable mills and manufactured with full Material Test Certificate (MTC) compliance.

Material Category Grades / Designations Typical ASTM Standard
Carbon Steel B7, B7M, B16, Grade 5, Grade 8 ASTM A193 / A307 / A449
Low-Alloy Steel (Cr-Mo) P5, P11, P22, P91 ASTM A193 B7
Stainless Steel Austenitic 304, 304L, 316, 316L, 316Ti, 321, 347 ASTM A193 / A194
Stainless Steel — High Alloy 310, 317L, 904L ASTM A193
Duplex Steel S31803, S32205 ASTM A182 F51
Super Duplex Steel S32750 (SAF 2507), S32760 (Zeron 100) ASTM A182 F53 / F55
Nickel 200 / 201 UNS N02200 / N02201 ASTM SB 160
Inconel 600 UNS N06600 ASTM SB 166
Inconel 601 UNS N06601 ASTM SB 166
Inconel 625 UNS N06625 ASTM SB 446
Inconel 718 UNS N07718 ASTM SB 425
Hastelloy C276 UNS N10276 ASTM SB 574
Hastelloy C22 UNS N06022 ASTM SB 574
Monel 400 UNS N04400 ASTM SB 164
Monel K500 UNS N05500 ASTM SB 865
Incoloy 800 / 800H / 800HT UNS N08800 / N08810 / N08811 ASTM SB 408
Incoloy 825 UNS N08825 ASTM SB 425
Alloy 20 UNS N08020 ASTM SB 473
SMO 254 UNS S31254 ASTM A182
Titanium Gr. 2 / 5 / 7 UNS R50400 / R56400 / R52400 ASTM SB 348
Copper-Nickel 90/10 UNS C70600 ASTM SB 151
Copper-Nickel 70/30 UNS C71500 ASTM SB 151
Aluminium 6061, 6063, 2024 ASTM B209
Brass C26000, C27000 ASTM B16
Tantalum R05200 ASTM B708

Applications & Industries Served

Our industrial fasteners are engineered for service conditions that demand zero-defect performance. Kalpataru Piping supplies to the following sectors:

Industry Key Application Recommended Fastener Material
Oil & Gas (Upstream) Wellhead, X-mas tree, subsea Inconel 625, Duplex S32205, Monel K500
Oil & Gas (Midstream) Pipeline flanges, compressor stations ASTM A193 B7, Stainless 316L
Petrochemical & Refining Pressure vessels, heat exchangers Hastelloy C276, Alloy 20, Incoloy 825
Power Generation Steam turbine casing, boiler flanges Alloy Steel P11/P22/P91
Nuclear Power Containment structures, reactor flanges Inconel 718, Nimonic, 316L
Chemical Processing Acid service, chloride environments Hastelloy C22, SMO 254, Titanium Gr.2
Desalination & Water Seawater piping, RO membrane frames Super Duplex S32750, Copper-Nickel
Marine & Offshore Deck equipment, subsea structures Super Duplex, Monel 400, CuNi 90/10
Aerospace & Defence Structural assemblies, engine components Inconel 718, Titanium Gr.5
Pharmaceutical & Food Hygienic vessels, CIP systems Stainless 316L, 304L
Fertiliser & Urea High-temperature, high-pressure reactors Incoloy 800HT, Alloy Steel
Pulp & Paper Bleach plant, digester connections Hastelloy C276, Titanium
Construction & Infrastructure Anchor bolts, structural connections Carbon Steel A307, A325, A490
Automotive & General Engg. Assembly, MRO Carbon Steel, Stainless 304

Key Fastener Applications in Piping Systems

Fasteners are an integral part of every flanged piping joint. When you source fasteners from Kalpataru Piping, they are specification-matched to our flanges and fittings — eliminating compatibility risk:

  • Flange Stud Bolts — Specified per ASME B16.5 pressure class; paired with matching heavy hex nuts
  • Vessel Closure Bolts — Pressure-retaining bolted joints on ASME VIII vessels
  • Heat Exchanger Tie Bolts — Long stud bolts in shell-and-tube bundle assemblies
  • Valve Bonnet Bolts — High-temperature service valves in power and process plant
  • Pipe Hanger Rods — Fully or partially threaded rods in carbon or alloy steel

Browse related piping components that work alongside our fasteners:

  • Flanges Manufacturer in India
  • Forged Fittings Manufacturers India
  • Buttweld Fittings
  • Pipes and Tubes

Manufacturing Process & Quality Control

Kalpataru Piping’s fastener manufacturing process follows a rigorous, stage-gated quality system that ensures every component meets its dimensional, mechanical, and chemical specification before it leaves our facility.

Stage 1 — Raw Material Sourcing & Incoming Inspection

We source bar stock, rod, and wire from approved mills with full mill test certificates. Every incoming heat/lot undergoes:

  • Chemical composition verification (OES Spectrometer)
  • Positive Material Identification (PMI) using XRF analyser
  • Dimensional check against material specification
  • Hardness survey (Brinell / Rockwell)

Stage 2 — Hot or Cold Forging

Fastener heads, shanks, and blanks are formed by hot or cold forging — a process that aligns grain structure for maximum strength and fatigue resistance. Hot forging is used for large-diameter, high-alloy fasteners; cold forging is preferred for smaller sizes where dimensional consistency is critical.

Stage 3 — Thread Rolling or Cutting

Threads are produced by:

  • Thread Rolling — Cold-roll threading for superior grain flow, higher fatigue strength, and smoother surface finish. Used for volume production of standard-size fasteners.
  • Thread Cutting / Tapping — CNC single-point threading for non-standard, coarse-pitch, or large-diameter threads requiring close tolerance.

All threads are gauged 100% to GO / NO-GO gauge sets traceable to national standards.

Stage 4 — Heat Treatment

Many fastener grades require heat treatment to achieve specified mechanical properties. Our processes include:

  • Solution Annealing (stainless, nickel alloys)
  • Quench and Temper (alloy steel, carbon steel)
  • Precipitation Hardening (Inconel 718, Monel K500)
  • Stress Relief Annealing

All heat treatment is performed in calibrated, atmosphere-controlled furnaces with time-temperature charts retained for traceability.

Stage 5 — Surface Finishing

Finishing options are selected based on the operating environment:

Finish Use Case
Bare / Black Structural, uncoated applications
Hot Dip Galvanised (HDG) Atmospheric exposure, construction
Bright Zinc Plated (BZP) General engineering, indoor/sheltered
Dacromet / Geomet Automotive, outdoor, marine edge
Xylan / PTFE Coating Flange bolts — anti-seize and low torque
Passivation Stainless steel — chromium oxide layer
Electroless Nickel Corrosion and wear resistance

Stage 6 — Final Inspection & Testing

Every batch is subjected to a final quality gate before despatch:

  • Dimensional inspection (gauges, CMM where applicable)
  • Proof Load Test
  • Wedge Tensile Test
  • Rockwell / Vickers Hardness Test
  • Charpy V-Notch Impact Test (for low-temperature grades)
  • Hydrogen Embrittlement Test (for electroplated fasteners)
  • Visual and surface inspection

Documentation issued: EN 10204 3.1 Mill Test Certificate, Third-Party Inspection available (TPI / TPIA), NACE MR0175 Compliance, PED 2014/68/EU Declaration of Conformity.

Certifications & Standards

Kalpataru Piping’s quality management system and product certifications meet the requirements of globally recognised bodies, giving our customers confidence in every fastener they receive.

Certification / Standard Scope
ISO 9001:2015 Quality Management System
PED 2014/68/EU Pressure Equipment Directive (Europe)
NACE MR0175 / ISO 15156 Sour-service (H₂S) environments
EN 10204 3.1 / 3.2 Material Test Certificates
ASTM A193 Alloy-Steel and SS Bolting for High-Temperature Service
ASTM A194 Carbon and Alloy Steel Nuts for Bolting
ASTM A307 Carbon Steel Bolts, Studs
ASTM A325 / A490 Structural bolts
ASME B18.2.1 Square, Hex, Heavy Hex Bolts & Screws
ASME B18.2.2 Square and Hex Nuts
ASME B18.31 Threaded Rods
DIN 931 / 933 / 934 / 985 Metric Bolts and Nuts
ISO 4014 / 4017 / 4032 Metric Bolts and Nuts
BS 4882 Bolting for Flanges (UK)
API 20E Alloy and Carbon Steel Bolting

Third-Party Inspection (TPI)

Kalpataru Piping welcomes third-party inspection by all major TPI agencies at our facility, including Bureau Veritas, SGS, Intertek, Lloyd’s Register, DNV GL, and TÜV Rheinland. Inspection reports and hold-point notifications are coordinated with your team’s QC requirements.

Why Choose Kalpataru Piping as Your Fasteners Manufacturer?

With hundreds of fastener suppliers active in the Indian market, the difference lies in depth of material knowledge, quality consistency, and the ability to handle complex specifications without compromising delivery. Here is what sets Kalpataru Piping apart:

1. Unmatched Material Depth

Most suppliers stock 10–20 materials. Kalpataru Piping manufactures fasteners in 200+ alloy grades — from common carbon steel to rare materials like Tantalum, SMO 254, and Beryllium Copper. Whatever your process demands, we have the material solution.

2. Full-Range Piping Partner

Our fasteners are designed to work alongside our flanges, forged fittings, buttweld fittings, and pipes and tubes — meaning you can specify a complete, dimensionally and materially compatible piping system from a single source. This eliminates the risk of inter-supplier specification mismatches.

3. Certified Quality You Can Audit

Every fastener ships with EN 10204 3.1 Material Test Certificates covering chemical composition, mechanical properties, and heat treatment records. Third-party inspection is standard, not an add-on.

4. Custom Engineering Capability

Need a fastener in a non-standard length, a proprietary thread form, or a combination of material and coating not offered by catalogue suppliers? Our engineering team works to your drawing, specification, or application description — and delivers.

5. Export-Ready, Global Logistics

Kalpataru Piping exports fasteners to clients across the Middle East, Europe, the Americas, Southeast Asia, and Africa. We prepare full export documentation — commercial invoice, packing list, certificate of origin, MTC, third-party inspection reports — and coordinate with freight forwarders for timely delivery to your port.

6. Competitive Pricing with No Compromise on Quality

As a direct manufacturer, we remove intermediary margins. Our pricing reflects actual material cost, manufacturing complexity, and volume — not distributor markups.

7. Responsive Technical Support

Our metallurgists and applications engineers are available to advise on material selection, specification compliance, and compatibility with your operating environment before you place an order.

 

Kalpataru Piping vs. Typical Fastener Suppliers — Comparison

Factor Kalpataru Piping Typical Distributor
Material Range 200+ alloy grades 10–30 grades
Manufacturing Control In-house, vertically integrated Third-party sourced
Certifications ISO, PED, NACE, API 20E ISO 9001 only (often)
Custom Sizes / Threads Yes, to drawing Limited
Material Traceability Full heat/lot, EN 10204 3.1 Batch-level only
TPI / Witness Inspection Yes, all major agencies Rarely
Full Piping System Supply Yes (flanges, fittings, pipes) Fasteners only
Export Experience 50+ countries Domestic focus

FAQs – Fastener

What types of fasteners does Kalpataru Piping manufacture?
Kalpataru Piping manufactures bolts (hex, heavy hex, carriage, flange, anchor, eye, U-bolt), nuts (hex, heavy hex, coupling, nylock, castle, dome), stud bolts (fully threaded, tap-end, double-end), washers (plain, spring, star, belleville), screws (socket head, self-tapping, machine, set screws), and threaded rods. All types are available in over 200 material grades.
Which material grades are available for industrial fasteners?
We supply fasteners in stainless steel (304, 316L, 321, 347, 904L), carbon steel (ASTM A193 B7, A307), alloy steel (P11, P22, P91), duplex and super duplex steel (S31803, S32205, S32750, S32760), nickel alloys (Inconel 600, 601, 625, 718, Hastelloy C276/C22, Monel 400/K500, Incoloy 825), titanium (Gr. 2, 5, 7), copper-nickel, aluminium, brass, and tantalum.
What standards do your fasteners comply with?
Our fasteners are manufactured to ASTM A193 / A194 / A307 / A325 / A490, ASME B18.2.1, B18.2.2, B18.31, DIN 931 / 933 / 934 / 985, ISO 4014 / 4017 / 4032, BS 4882, API 20E, NACE MR0175, and EN 10204. Third-party inspection by Bureau Veritas, SGS, Intertek, and TÜV is available.
Can Kalpataru Piping manufacture custom-size fasteners?
Yes. We manufacture fasteners to customer drawings and specifications — including non-standard lengths, special thread forms (ACME, stub ACME, trapezoidal), unique head configurations, and alloy combinations not available from catalogue suppliers. Share your technical drawing or specification and our team will confirm feasibility and lead time.
What is the minimum order quantity (MOQ) for fasteners?
MOQ varies by material grade and fastener type. Standard carbon and stainless steel fasteners can typically be supplied from small quantities. For exotic alloys (Inconel, Hastelloy, Monel, Titanium), MOQs are set by the material heat weight. Contact our sales team with your requirements for a specific MOQ and price quote.
Do you supply fasteners for flanged piping joints?
Yes. Stud bolts and heavy hex nuts for ASME B16.5 flanged joints are one of our most supplied fastener products. We can match stud bolt and nut material exactly to the flange material, ensuring galvanic compatibility and specification compliance. View our flanges range to source a fully matched assembly.
What documentation do you provide with fasteners?
All fasteners are supplied with EN 10204 3.1 Material Test Certificates covering chemical composition and mechanical properties. Additional documentation — heat treatment records, PMI reports, third-party inspection certificates, NACE MR0175 compliance statements, and packaging lists — is available on request.
Do you export fasteners internationally?
Yes. Kalpataru Piping exports to over 50 countries including the UAE, Saudi Arabia, Qatar, Oman, Kuwait, USA, UK, Germany, Singapore, Malaysia, Indonesia, South Africa, Australia, and Brazil. We handle all export documentation, packing, and freight coordination.
What is the difference between a bolt and a stud bolt?
A bolt has a head at one end and is inserted through unthreaded holes, then secured with a nut. A stud bolt (also called a stud) is fully or partially threaded with no head — it is threaded into a tapped hole at one end and secured with a nut at the other. Stud bolts are the preferred fastener for high-pressure flanged joints because they allow even load distribution and easier re-torquing without the risk of galling.
Which fastener material should I use in a chloride-rich or seawater environment?
For seawater and chloride-rich environments, the most reliable options are Super Duplex Steel (UNS S32750 or S32760), which offers exceptional pitting and crevice corrosion resistance, and Titanium Grade 2 or Grade 5 for maximum corrosion immunity. Monel 400 and Copper-Nickel alloys are also well-proven in marine service. Contact our technical team for application-specific advice. See our Super Duplex Fasteners and Titanium Fasteners ranges.

Need Certified Fasteners for Your Next Project?

From a standard hex bolt in stainless steel to a custom Inconel 718 stud bolt engineered to your specification — Kalpataru Piping delivers. Talk to our technical team today and receive a competitive quote within 24 hours.

✔ISO 9001:2015 Certified
✔ASTM / ASME / DIN Compliant
✔EN 10204 3.1 MTC Supplied
✔Export to 50+ Countries
✔Third-Party Inspection Ready
✔Custom Engineering Available

    Enquire Now

    Fill the below form and get in touch with us, we’ll call you back.

    Fill the Captcha:

    Our Products

    Hot Products

    Enquire Now
    close slider

      Enquire Now

      Fill the below form and get in touch with us, we’ll call you back.

      Fill the Captcha:
      WhatsApp chat