Kalpataru Piping stands among the most reliable fasteners manufacturers in India, delivering precision-engineered bolts, nuts, studs, washers, and threaded rods to industries that cannot afford failure. With decades of hands-on manufacturing experience and a material portfolio spanning over 200 alloy grades — from standard carbon steel to exotic Inconel, Hastelloy, Monel, Duplex, and Titanium — we bring unmatched depth to every fastener requirement. Every component we produce is engineered to meet internationally recognised standards including ASTM, ASME, DIN, BS, ISO, and EN, making Kalpataru Piping a preferred sourcing partner for oil and gas, petrochemical, power generation, chemical processing, marine, and aerospace sectors. As a vertically integrated manufacturer, we control quality at every stage — from raw material selection and precision machining through heat treatment, surface finishing, and final dimensional inspection — ensuring that each fastener you receive performs exactly as specified, every single time. Whether you need a standard hex bolt in stainless steel or a custom-engineered stud bolt in Inconel 625 for a high-temperature, high-pressure application, Kalpataru Piping has the capability, certification, and commitment to deliver. Explore our industrial fasteners range or connect with our technical team for application-specific guidance.
Table of Contents
What Are Industrial Fasteners?
Industrial fasteners are mechanically engineered components — bolts, nuts, studs, washers, screws, and threaded rods — designed to join two or more structures together with reliable, repeatable force. In demanding industrial environments such as oil refineries, chemical plants, power stations, and offshore platforms, fasteners are literally the elements that hold everything together under extremes of temperature, pressure, vibration, and corrosive media.
Unlike standard commercial fasteners, industrial fasteners manufacturers produce components that must conform to exacting dimensional tolerances, defined mechanical properties (tensile strength, yield strength, hardness, and impact resistance), and strict material traceability. A single under-spec fastener in a pressurised piping joint or a flanged connection can trigger catastrophic failure — making the choice of manufacturer as critical as the choice of fastener itself.
At Kalpataru Piping, every fastener we manufacture is built for the harshest duty cycles. Our range pairs with our broader piping solutions — from flanges and forged fittings to pipes and tubes — so you can source complete, specification-matched piping assemblies from one trusted partner.
Why Material Selection Matters in Fasteners
Different operating environments demand different alloy fasteners:
- Stainless Steel — General corrosion resistance, hygienic and food-grade applications
- Carbon Steel — High-strength structural and pressure-retaining joints
- Alloy Steel (P5, P11, P22, P91) — Elevated-temperature power and process plant service
- Nickel Alloys (Inconel, Hastelloy, Monel) — Extreme heat, cryogenic, and aggressive chemical service
- Duplex & Super Duplex Steel — Chloride-rich environments, offshore, and desalination
- Titanium — Lightweight, seawater-resistant applications in aerospace and marine
- Copper-Nickel, Aluminium, Brass — Marine, heat-exchanger, and electrical applications
Types of Fasteners We Manufacture
As a full-range industrial fasteners manufacturer, Kalpataru Piping produces every major fastener category in a wide selection of materials and grades. Each product line is manufactured to the dimensional, mechanical, and surface-finish requirements of the applicable international standard.
Bolts
Bolts are externally threaded fasteners designed to pass through aligned holes and secure with a mating nut or into a tapped hole. We manufacture:
- Hex Head Bolts (HHB)
- Heavy Hex Bolts
- Square Head Bolts
- Carriage Bolts
- Flange Bolts
- T-Head Bolts
- Eye Bolts
- U-Bolts
- J-Bolts
- Anchor / Foundation Bolts
- Socket Head Cap Screws
Standards: ASME B18.2.1, DIN 931, DIN 933, ISO 4014, ISO 4017
Nuts
Nuts are internally threaded fasteners that engage bolt threads to form a clamped joint. Kalpataru Piping supplies:
- Heavy Hex Nuts
- Hex Coupling Nuts
- Hex Thin (Jam) Nuts
- Square Nuts
- Castle / Slotted Nuts
- Self-Locking (Nylock) Nuts
- Dome Cap Nuts
- Weld Nuts
- Flange Nuts
Standards: ASME B18.2.2, DIN 934, DIN 985, ISO 4032, ISO 7042
Stud Bolts
Stud bolts are used in high-pressure flanged joints across the process industry. We manufacture fully threaded, tap-end, and double-end studs — the most widely specified fastener for pipeline flanges.
- Fully Threaded Studs
- Tap-End Studs
- Double-End Studs
- Weld Studs
- Tie Rods
Standards: ASTM A193, ASTM A307, ASME B16.5, ASME B18.31
Washers
Washers distribute bearing load, prevent surface damage, and improve joint integrity. Our range:
- Plain / Flat Washers
- Spring Lock Washers
- Star / Tooth Washers
- Taper Washers
- Belleville (Disc Spring) Washers
- Structural / Heavy Duty Washers
Standards: ASME B18.22.1, DIN 125, DIN 127, ISO 7089, ISO 7090
Screws
- Pan Head Slotted Screws
- Countersunk Head Screws
- Socket Head Allen Cap Screws
- Machine Screws
- Self-Tapping Screws
- Set Screws / Grub Screws
Threaded Rods
Fully or partially threaded rods used in structural tie, hanger, and anchor assemblies — available in metric and imperial thread forms across all major alloy grades.
Fastener Material Range
Shop by material to find the right fastener for your service conditions:
Technical Specifications of Fastener
| Parameter | Details |
|---|---|
| Standards | ASTM, ASME, DIN, BS, EN, ISO, JIS, SAE |
| Size Range (Metric) | M2 to M160 |
| Size Range (Imperial) | ¼” to 4″ (and custom) |
| Length Range | 4 mm to 3000 mm (custom lengths available) |
| Thread Forms | Metric (Coarse & Fine), UNC, UNF, UNEF, BSW, BSF, BSP, NPT, ACME |
| Thread Tolerance | 6g / 6H (ISO 965-1); 2A / 2B (ASME B1.1) |
| Tensile Strength | 400 MPa to 1400+ MPa (material/grade dependent) |
| Hardness Range | 70 HRB to 45 HRC (application-specific) |
| Coating / Finish | Plain, Zinc Plated, HDG, BZP, Dacromet, Xylan, PTFE, Passivated, Phosphated |
| Packing | Bulk bags, cartons, wooden pallets, custom labelling |
| Testing | Hardness, Tensile, Charpy Impact, Hydrogen Embrittlement, Proof Load, Dimensional |
| Documentation | MTC EN 10204 3.1 / 3.2, Chemical Analysis, PMI, NACE, PED |
| Form | Description |
|---|---|
| Hex (Hexagonal) | Most common; wrench-driven on six flats |
| Square | Four-flat head for high-torque applications |
| Round | Used in carriage bolts; prevents rotation |
| Countersunk / Flat | Flush-mount applications |
| Flanged | Integral washer face distributes load |
| Socket / Allen | Internal hex drive for recessed fitment |
| Eye / Hook | Loop head for hanging and lifting |
Thread Standards Cross-Reference
| Thread System | Standard | Common Application |
|---|---|---|
| Metric Coarse (MC) | ISO 261 / DIN 13 | General engineering worldwide |
| Metric Fine (MF) | ISO 261 | Thin-walled and vibration-prone joints |
| UNC / UNF | ASME B1.1 | North American process industry |
| BSW / BSF | BS 84 | Legacy UK equipment |
| BSP (G-Thread) | ISO 228 | Pipe fittings and hydraulics |
| NPT | ASME B1.20.1 | Tapered pipe threads, North American |
| ACME / Trapezoidal | DIN 103 | Lead screws, actuators |
Materials & Grades
Kalpataru Piping maintains one of India’s broadest fastener material portfolios. Every grade is sourced from traceable mills and manufactured with full Material Test Certificate (MTC) compliance.
| Material Category | Grades / Designations | Typical ASTM Standard |
|---|---|---|
| Carbon Steel | B7, B7M, B16, Grade 5, Grade 8 | ASTM A193 / A307 / A449 |
| Low-Alloy Steel (Cr-Mo) | P5, P11, P22, P91 | ASTM A193 B7 |
| Stainless Steel Austenitic | 304, 304L, 316, 316L, 316Ti, 321, 347 | ASTM A193 / A194 |
| Stainless Steel — High Alloy | 310, 317L, 904L | ASTM A193 |
| Duplex Steel | S31803, S32205 | ASTM A182 F51 |
| Super Duplex Steel | S32750 (SAF 2507), S32760 (Zeron 100) | ASTM A182 F53 / F55 |
| Nickel 200 / 201 | UNS N02200 / N02201 | ASTM SB 160 |
| Inconel 600 | UNS N06600 | ASTM SB 166 |
| Inconel 601 | UNS N06601 | ASTM SB 166 |
| Inconel 625 | UNS N06625 | ASTM SB 446 |
| Inconel 718 | UNS N07718 | ASTM SB 425 |
| Hastelloy C276 | UNS N10276 | ASTM SB 574 |
| Hastelloy C22 | UNS N06022 | ASTM SB 574 |
| Monel 400 | UNS N04400 | ASTM SB 164 |
| Monel K500 | UNS N05500 | ASTM SB 865 |
| Incoloy 800 / 800H / 800HT | UNS N08800 / N08810 / N08811 | ASTM SB 408 |
| Incoloy 825 | UNS N08825 | ASTM SB 425 |
| Alloy 20 | UNS N08020 | ASTM SB 473 |
| SMO 254 | UNS S31254 | ASTM A182 |
| Titanium Gr. 2 / 5 / 7 | UNS R50400 / R56400 / R52400 | ASTM SB 348 |
| Copper-Nickel 90/10 | UNS C70600 | ASTM SB 151 |
| Copper-Nickel 70/30 | UNS C71500 | ASTM SB 151 |
| Aluminium | 6061, 6063, 2024 | ASTM B209 |
| Brass | C26000, C27000 | ASTM B16 |
| Tantalum | R05200 | ASTM B708 |
Applications & Industries Served
Our industrial fasteners are engineered for service conditions that demand zero-defect performance. Kalpataru Piping supplies to the following sectors:
| Industry | Key Application | Recommended Fastener Material |
|---|---|---|
| Oil & Gas (Upstream) | Wellhead, X-mas tree, subsea | Inconel 625, Duplex S32205, Monel K500 |
| Oil & Gas (Midstream) | Pipeline flanges, compressor stations | ASTM A193 B7, Stainless 316L |
| Petrochemical & Refining | Pressure vessels, heat exchangers | Hastelloy C276, Alloy 20, Incoloy 825 |
| Power Generation | Steam turbine casing, boiler flanges | Alloy Steel P11/P22/P91 |
| Nuclear Power | Containment structures, reactor flanges | Inconel 718, Nimonic, 316L |
| Chemical Processing | Acid service, chloride environments | Hastelloy C22, SMO 254, Titanium Gr.2 |
| Desalination & Water | Seawater piping, RO membrane frames | Super Duplex S32750, Copper-Nickel |
| Marine & Offshore | Deck equipment, subsea structures | Super Duplex, Monel 400, CuNi 90/10 |
| Aerospace & Defence | Structural assemblies, engine components | Inconel 718, Titanium Gr.5 |
| Pharmaceutical & Food | Hygienic vessels, CIP systems | Stainless 316L, 304L |
| Fertiliser & Urea | High-temperature, high-pressure reactors | Incoloy 800HT, Alloy Steel |
| Pulp & Paper | Bleach plant, digester connections | Hastelloy C276, Titanium |
| Construction & Infrastructure | Anchor bolts, structural connections | Carbon Steel A307, A325, A490 |
| Automotive & General Engg. | Assembly, MRO | Carbon Steel, Stainless 304 |
Key Fastener Applications in Piping Systems
Fasteners are an integral part of every flanged piping joint. When you source fasteners from Kalpataru Piping, they are specification-matched to our flanges and fittings — eliminating compatibility risk:
- Flange Stud Bolts — Specified per ASME B16.5 pressure class; paired with matching heavy hex nuts
- Vessel Closure Bolts — Pressure-retaining bolted joints on ASME VIII vessels
- Heat Exchanger Tie Bolts — Long stud bolts in shell-and-tube bundle assemblies
- Valve Bonnet Bolts — High-temperature service valves in power and process plant
- Pipe Hanger Rods — Fully or partially threaded rods in carbon or alloy steel
Browse related piping components that work alongside our fasteners:
- Flanges Manufacturer in India
- Forged Fittings Manufacturers India
- Buttweld Fittings
- Pipes and Tubes
Manufacturing Process & Quality Control
Kalpataru Piping’s fastener manufacturing process follows a rigorous, stage-gated quality system that ensures every component meets its dimensional, mechanical, and chemical specification before it leaves our facility.
Stage 1 — Raw Material Sourcing & Incoming Inspection
We source bar stock, rod, and wire from approved mills with full mill test certificates. Every incoming heat/lot undergoes:
- Chemical composition verification (OES Spectrometer)
- Positive Material Identification (PMI) using XRF analyser
- Dimensional check against material specification
- Hardness survey (Brinell / Rockwell)
Stage 2 — Hot or Cold Forging
Fastener heads, shanks, and blanks are formed by hot or cold forging — a process that aligns grain structure for maximum strength and fatigue resistance. Hot forging is used for large-diameter, high-alloy fasteners; cold forging is preferred for smaller sizes where dimensional consistency is critical.
Stage 3 — Thread Rolling or Cutting
Threads are produced by:
- Thread Rolling — Cold-roll threading for superior grain flow, higher fatigue strength, and smoother surface finish. Used for volume production of standard-size fasteners.
- Thread Cutting / Tapping — CNC single-point threading for non-standard, coarse-pitch, or large-diameter threads requiring close tolerance.
All threads are gauged 100% to GO / NO-GO gauge sets traceable to national standards.
Stage 4 — Heat Treatment
Many fastener grades require heat treatment to achieve specified mechanical properties. Our processes include:
- Solution Annealing (stainless, nickel alloys)
- Quench and Temper (alloy steel, carbon steel)
- Precipitation Hardening (Inconel 718, Monel K500)
- Stress Relief Annealing
All heat treatment is performed in calibrated, atmosphere-controlled furnaces with time-temperature charts retained for traceability.
Stage 5 — Surface Finishing
Finishing options are selected based on the operating environment:
| Finish | Use Case |
|---|---|
| Bare / Black | Structural, uncoated applications |
| Hot Dip Galvanised (HDG) | Atmospheric exposure, construction |
| Bright Zinc Plated (BZP) | General engineering, indoor/sheltered |
| Dacromet / Geomet | Automotive, outdoor, marine edge |
| Xylan / PTFE Coating | Flange bolts — anti-seize and low torque |
| Passivation | Stainless steel — chromium oxide layer |
| Electroless Nickel | Corrosion and wear resistance |
Stage 6 — Final Inspection & Testing
Every batch is subjected to a final quality gate before despatch:
- Dimensional inspection (gauges, CMM where applicable)
- Proof Load Test
- Wedge Tensile Test
- Rockwell / Vickers Hardness Test
- Charpy V-Notch Impact Test (for low-temperature grades)
- Hydrogen Embrittlement Test (for electroplated fasteners)
- Visual and surface inspection
Documentation issued: EN 10204 3.1 Mill Test Certificate, Third-Party Inspection available (TPI / TPIA), NACE MR0175 Compliance, PED 2014/68/EU Declaration of Conformity.
Certifications & Standards
Kalpataru Piping’s quality management system and product certifications meet the requirements of globally recognised bodies, giving our customers confidence in every fastener they receive.
| Certification / Standard | Scope |
|---|---|
| ISO 9001:2015 | Quality Management System |
| PED 2014/68/EU | Pressure Equipment Directive (Europe) |
| NACE MR0175 / ISO 15156 | Sour-service (H₂S) environments |
| EN 10204 3.1 / 3.2 | Material Test Certificates |
| ASTM A193 | Alloy-Steel and SS Bolting for High-Temperature Service |
| ASTM A194 | Carbon and Alloy Steel Nuts for Bolting |
| ASTM A307 | Carbon Steel Bolts, Studs |
| ASTM A325 / A490 | Structural bolts |
| ASME B18.2.1 | Square, Hex, Heavy Hex Bolts & Screws |
| ASME B18.2.2 | Square and Hex Nuts |
| ASME B18.31 | Threaded Rods |
| DIN 931 / 933 / 934 / 985 | Metric Bolts and Nuts |
| ISO 4014 / 4017 / 4032 | Metric Bolts and Nuts |
| BS 4882 | Bolting for Flanges (UK) |
| API 20E | Alloy and Carbon Steel Bolting |
Third-Party Inspection (TPI)
Kalpataru Piping welcomes third-party inspection by all major TPI agencies at our facility, including Bureau Veritas, SGS, Intertek, Lloyd’s Register, DNV GL, and TÜV Rheinland. Inspection reports and hold-point notifications are coordinated with your team’s QC requirements.
Why Choose Kalpataru Piping as Your Fasteners Manufacturer?
With hundreds of fastener suppliers active in the Indian market, the difference lies in depth of material knowledge, quality consistency, and the ability to handle complex specifications without compromising delivery. Here is what sets Kalpataru Piping apart:
1. Unmatched Material Depth
Most suppliers stock 10–20 materials. Kalpataru Piping manufactures fasteners in 200+ alloy grades — from common carbon steel to rare materials like Tantalum, SMO 254, and Beryllium Copper. Whatever your process demands, we have the material solution.
2. Full-Range Piping Partner
Our fasteners are designed to work alongside our flanges, forged fittings, buttweld fittings, and pipes and tubes — meaning you can specify a complete, dimensionally and materially compatible piping system from a single source. This eliminates the risk of inter-supplier specification mismatches.
3. Certified Quality You Can Audit
Every fastener ships with EN 10204 3.1 Material Test Certificates covering chemical composition, mechanical properties, and heat treatment records. Third-party inspection is standard, not an add-on.
4. Custom Engineering Capability
Need a fastener in a non-standard length, a proprietary thread form, or a combination of material and coating not offered by catalogue suppliers? Our engineering team works to your drawing, specification, or application description — and delivers.
5. Export-Ready, Global Logistics
Kalpataru Piping exports fasteners to clients across the Middle East, Europe, the Americas, Southeast Asia, and Africa. We prepare full export documentation — commercial invoice, packing list, certificate of origin, MTC, third-party inspection reports — and coordinate with freight forwarders for timely delivery to your port.
6. Competitive Pricing with No Compromise on Quality
As a direct manufacturer, we remove intermediary margins. Our pricing reflects actual material cost, manufacturing complexity, and volume — not distributor markups.
7. Responsive Technical Support
Our metallurgists and applications engineers are available to advise on material selection, specification compliance, and compatibility with your operating environment before you place an order.
Kalpataru Piping vs. Typical Fastener Suppliers — Comparison
| Factor | Kalpataru Piping | Typical Distributor |
|---|---|---|
| Material Range | 200+ alloy grades | 10–30 grades |
| Manufacturing Control | In-house, vertically integrated | Third-party sourced |
| Certifications | ISO, PED, NACE, API 20E | ISO 9001 only (often) |
| Custom Sizes / Threads | Yes, to drawing | Limited |
| Material Traceability | Full heat/lot, EN 10204 3.1 | Batch-level only |
| TPI / Witness Inspection | Yes, all major agencies | Rarely |
| Full Piping System Supply | Yes (flanges, fittings, pipes) | Fasteners only |
| Export Experience | 50+ countries | Domestic focus |
FAQs – Fastener
What types of fasteners does Kalpataru Piping manufacture?
Which material grades are available for industrial fasteners?
What standards do your fasteners comply with?
Can Kalpataru Piping manufacture custom-size fasteners?
What is the minimum order quantity (MOQ) for fasteners?
Do you supply fasteners for flanged piping joints?
What documentation do you provide with fasteners?
Do you export fasteners internationally?
What is the difference between a bolt and a stud bolt?
Which fastener material should I use in a chloride-rich or seawater environment?
Need Certified Fasteners for Your Next Project?
From a standard hex bolt in stainless steel to a custom Inconel 718 stud bolt engineered to your specification — Kalpataru Piping delivers. Talk to our technical team today and receive a competitive quote within 24 hours.















