Inconel 600 Fasteners
Table of Content
- Introduction to Inconel 600 Fasteners
- Inconel 600 Fasteners Standards & Specifications
- Types Of Inconel 600 Fasteners
- Inconel 625 Fasteners Price – Kalpataru Piping Solutions
- Size Ranges, Dimensions Chart for Inconel 600 Fasteners
- Weight Chart for Inconel 600 Fasteners
- Torque Tolerance & Heat Properties of Inconel 600 Fasteners
- Quality Testing for Inconel 600 Fasteners
- Applications of Inconel 625 Fasteners
- Frequently Asked Questions About Inconel 600 Fasteners
Introduction to Inconel 600 Fasteners
Kalpataru Piping is a well known supplier/ exporter of Inconel 600 Fasteners in India, the production of Inconel 600 fasteners which is highly performance oriented and has the ability to endure extreme heat, pressure and even corrosive environment. Designed as per ASTM B166 / ASME SB166 for Inconel 600 (UNS N06600 / Werkstoff Nr. These clamps give an excellent oxidation resistance and mechanical strength of 2.4816). The low coefficient of friction decreases sticking or galling in a wet or salty environment.
Our Inconel 600 bolts, nuts, stud bolts, screws, washers, U bolts, heavy hex bolts, and spring washers are available in sizes from M3 to M100 and 3/6″ to 4″. We also manufacture Inconel 625 Fasteners and Inconel 718 Fasteners for a wide range of critical applications.
Inconel 600 Fasteners Standards & Specifications: ASTM B166 & ASME SB166
All Inconel 600 fasteners are manufactured to international standards ASTM B166 and ASME SB166. These standards ensure high corrosion resistance and elevated temperature strength, making them ideal for chemical, marine, aerospace, and nuclear environments.
Specification Chart for Inconel 600 Fasteners
|
Specification |
Details |
|
Standard |
ASTM B166 / ASME SB166 |
|
UNS Grade |
N06600 |
|
DIN / Werkstoff Nr. |
2.4816 |
|
Bolt & Screw Size |
M3 – M100 | 3/6″ – 4″ | Custom |
|
Fastener Length |
3 mm – 200 mm | Custom |
|
Nuts & Washers Size |
M3 – M56 | 3/6″ to 2″ |
|
Threads Available |
UNC, UNF, BSW, BSF, METRIC, or as required |
|
Thread Configuration |
ASME B1.1 2A/3A – 2B/3B Inch Unified; B1.13M 6h-6G Metric Coarse |
|
Surface Treatment |
Passivation / Plain |
|
Coating Options |
Zinc, Hot Dip Galvanized (HDG), Cadmium, Nickel, PTFE/Teflon |
|
Form |
Hex, Threading, Square, Round |
|
Head Types |
Hex, Square, Round, Hex Flange, Flat, T-head, Triangular |
|
Dimensions |
DIN 931, 933, 934, 7991, 976, 125; ASME B18.2.1, B18.3 |
|
Manufacturing Process |
Wire Drawing, Cold Heading, Heat Treatment, Surface Plating, Inspection, Packing |
|
Tolerance |
±0.03 mm | OEM / ODM available |
|
Payment Modes |
LC (Letter of Credit), TT (Telegraphic Transfer), Cheque |
|
Port of Dispatch |
JNPT Mumbai / Kalamboli, Maharashtra, India |
Inconel 600 Fasteners Chemical Composition
|
Grade |
C (max) |
Mn (max) |
Si (max) |
S (max) |
Cu (max) |
Fe |
Ni (min) |
Cr |
|
Inconel 600 (UNS N06600) |
0.15 |
1.00 |
0.50 |
0.015 |
0.50 |
6.00–10.00 |
72.00 |
14.00–17.00 |
Mechanical Properties of Nickel Alloy 600 Fasteners
| Property | Value |
| Density | 8.47 g/cm³ |
| Melting Point | 1413 °C (2580 °F) |
| Tensile Strength | 95,000 Psi / 655 MPa |
| Yield Strength (0.2% Offset) | 45,000 Psi / 310 MPa |
| Elongation | 40% |
Thread Types Available for Inconel 600 Fasteners
We supply Inconel 600 fasteners across all major thread standards to meet global project requirements:
| Thread Type | Full Form | Application |
| UNC | Unified National Coarse | General-purpose bolts and nuts, most common in North America |
| UNF | Unified National Fine | Higher torque applications, thin-walled fittings, aerospace |
| BSW | British Standard Whitworth | Legacy UK and Indian engineering projects |
| BSF | British Standard Fine | Fine-pitch British thread for precision assemblies |
| ISO Metric (M) | Metric Coarse / Fine | International standard; M3 to M100 available |
| 8UN | Eight Unified Thread | Pressure vessel flange bolting (ASME PCC-1) |
Coating & Surface Treatment Options
All Inconel 600 fasteners can be supplied with a range of surface treatments to enhance corrosion resistance and service life:
- Passivation (Plain) – Standard finish; removes free iron and enhances natural oxide layer
- Zinc Coating – Electroplated zinc for mild corrosion protection
- Hot Dip Galvanized (HDG) – Thick zinc coating for outdoor and marine environments
- Cadmium Plating – Aerospace-grade coating for salt spray resistance
- Nickel Plating – Enhanced corrosion and wear resistance
- PTFE / Teflon Coating – Low-friction, chemical-resistant coating for aggressive media
Inconel 600 Fasteners Price in India
The Inconel 600 fasteners price per kg in India depends on fastener type, size, coating, thread standard, and order quantity. Kalpataru Piping offers competitive pricing backed by ready stock and custom manufacturing. Below is an indicative price list for Inconel 600 bolts, nuts, and washers:
| Fastener Type | Size / Specification | Est. Price (INR per unit) |
| Inconel 600 Hex Bolt | M6 | ₹420 – ₹480 |
| Inconel 600 Hex Bolt | M8 | ₹620 – ₹700 |
| Inconel 600 Hex Bolt | M10 | ₹820 – ₹900 |
| Inconel 600 Nut | M6 | ₹320 – ₹380 |
| Inconel 600 Nut | M8 | ₹470 – ₹530 |
| Inconel 600 Flat Washer | Standard Metric | ₹180 – ₹380 |
| Inconel 600 Stud Bolt | M6 | ₹700 – ₹800 |
| Inconel 600 Stud Bolt | M8 | ₹950 – ₹1,050 |
| Inconel 600 Socket Cap Screw | Metric Small Sizes | ₹230 – ₹290 |
| Inconel 600 Hex Bolt (DIN) | M3–M12 | ₹1,050 – ₹1,450 |
Note: Prices are indicative and subject to change based on LME nickel rates, quantity, coating, and delivery terms. Contact us for a firm quotation.
Inconel 600 vs Inconel 625 Fasteners – Key Differences
Procurement engineers often compare Inconel 600 fasteners and Inconel 625 fasteners. The table below clarifies the critical differences:
| Parameter | Inconel 600 (UNS N06600) | Inconel 625 (UNS N06625) |
| Nickel Content | 72% min | 58% min |
| Key Alloying Elements | Ni-Cr-Fe | Ni-Cr-Mo-Nb |
| Tensile Strength | 655 MPa | 930 MPa |
| Yield Strength | 310 MPa | 517 MPa |
| Primary Strength | Oxidation & Heat Resistance | Corrosion & Strength |
| Max Operating Temp | ~1175°C (2150°F) | ~980°C (1800°F) – creep limited |
| Pitting Resistance | Moderate | Excellent (high Mo content) |
| Typical Applications | Nuclear reactors, heat treating, chemical processing | Seawater, offshore, aerospace, chemical plant |
| Relative Cost | Lower | Higher |
| Standard | ASTM B166 | ASTM B446 |
Applications of Inconel 600 Fasteners
Inconel 600 fasteners (UNS N06600) are ideal for demanding applications across multiple industries:
- Nuclear Reactors – Preferred for nuclear applications due to resistance to chloride-ion stress corrosion cracking
- Chemical Processing & Petrochemical Plants – Withstands aggressive acids, alkalis, and high-temperature steam
- Marine & Offshore Structures – Resistant to saltwater corrosion and biofouling
- Aerospace Components – High strength-to-weight ratio and oxidation resistance at elevated temperatures
- Power Generation Equipment – Used in superheater tubes, heat exchangers, and turbine components
- Heat Treatment Fixtures – Excellent performance in carburizing and nitriding atmospheres
- Oil & Gas Pipelines & Valves – Corrosion-resistant fastening for sour gas and CO₂ environments
See our complete range of Inconel Fasteners for all Inconel grades.
Quality Testing for Inconel 600 Fasteners
Every batch of Inconel 600 fasteners undergoes rigorous testing to ensure compliance and performance:
- Mechanical / Strength Tests – Tensile, proof load, compression, flexure, wedge tensile, and fatigue tests
- Hardness & Material Testing – Brinell hardness (BHN), micro/macro examination, Positive Material Identification (PMI)
- Corrosion & Environmental Tests – Pitting corrosion, intergranular corrosion (IGC), creep tests
- Non-Destructive Tests (NDT) – Radiography (RT), Ultrasonic Testing (UT)
- Destructive Tests – Drop weight, flattening, and torsion tests
Each fastener is clearly marked with: BHN, Manufacturer’s name/symbol, Heat code, Grade, Nominal diameter, and ASTM specification for full traceability.
Related Products & Internal Links
Explore our complete range of Inconel and Nickel Alloy products:
Frequently Asked Questions About Inconel 600 Fasteners
How does the Inconel 600 nuts differ significantly with Inconel 625 nuts?
Nuts made of Inconel 600 (UNS N06600) have better oxidation and high temperature stability. Nuts made of Inconel 625 (UNS N06625) have better tensile strength and high pitting/crevice corrosion resistance because of molybdenum and niobium. Select on the basis of temperature range and corrosion environment.
Inconel 600 fasteners have a general use?
Applications A: Inconel 600 fasteners are also common in nuclear reactors, heat treating equipment, chemical processing, marine, aerospace and oil and gas pipelines where high heat and corrosion resistance are needed.
What are the types of thread used in Inconel 600 fasteners?
Inconel 600 fasteners are provided by us in UNC, UNF, BSW, BSF, ISO Metric and 8UN thread forms in accordance with ASME B1.1 and B1.13M specifications.
What is the reason why Inconel 600 fasteners are chosen when it comes to nuclear reactor?
Inconel 600 is resistant to chloride-ion stress corrosion cracking (SCC) and has a mechanical property to 1175 o C. It is excellent in thermal expansion coefficient and nickel-chromium composition, which makes it stable, and therefore, it is excellent in nuclear pressure vessel and steam generator.
How much is the price of the Inconel 600 fasteners in India per kg?
The prices depend on the size and thread, coating, and quantity. Prices vary between 420 and 1450 or more per unit of bolts (M6 to M12). Get in touch with Kalpataru Piping at exporting piping kalpatarupiping.com with specific quote depending on your needs.
How and what are the terms of payment and shipment?
We do accept LC (Letter of Credit), TT (Telegraphic Transfer) and Cheque. The fasteners are shipped at the JNPT Mumbai / Kalamboli, Maharashtra, India.
Related Products
